velleman VMA444 FM Tuner Evaluation Board User Manual
- June 4, 2024
- Velleman
Table of Contents
VMA444 FM Tuner Evaluation Board
User Manual
**SI4703 FM TUNER EVALUATION BOARD
**
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device
after its lifecycle could harm the environment. Do not dispose of the unit (or
batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling. This device should be returned to your distributor or
to a local recycling service. Respect the local environmental rul es.If in
doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman®! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, do
not install or use it and contact your dealer.
Safety Instructions
**** This device can be used by children aged 8 years and above, and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
the use of the device in a safe way and understand the hazards involved.
Children shall not play with the device. Cleaning and user maintenance shall
not be made by children without supervision
Indoor use only. Keep away from rain, moisture, splashing, and dripping
liquids.
General Guidelines
- Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
- Familiarise yourself with the functions of the device before actually using it.
- All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
- Only use the device for its intended purpose. Using the device in an unauthorized way will void the warranty.
- Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
- Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary, incidental or indirect) – of any nature (financial, physical…) arising from the possession, ,use or failure of this product.
- Due to constant product improvements, the actual product appearance might differ from the shown images.
- Product images are for illustrative purposes only.
- Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature.
- Keep this manual for future reference.
What is Arduino®
Arduino® is an open-source prototyping platform based in easy-to-use
hardware and software. Arduino® boards are able to read inputs – light-on
sensor, a finger on a button or a Twitter message – and turn it into an output
– activating of a motor, turning on an LED, or publishing something online.
You can tell your board what to do by sending a set of instructions to the
microcontroller on the board. To do so, you use the Arduino programming
language (based on Wiring) and the Arduino® software IDE (based on
Processing). Surf at www.arduino.cc and
www.arduino.org for more information.
Overview
The VMA444 is a radio and RDS receiver combined with an efficient 150 mW audio amplifier. This module is ideal if you want to create your own clock radio or if you want to add FM functionality to your projects.
interface | I2C |
---|---|
power/logic leve | 3.3-5 V |
sensitivity | 1.7 µ emf |
max. output power | 150 mW (8 Ω) |
default gain | 18 dB (8 x) (adjustable) |
dimensions | 29 x 22 mm |
Connections
VMA444 | VMA100 |
---|---|
5V | 5V |
GND | GND |
A4 | STUDIO |
A5 | SCLK |
D2 | RST |
As with any receiver, the VMA444 needs an antenna. The VMA444 antenna is
connected to the grounding of your earphone cable, so an earphone or audio
cable has to be plugged in to operate the VMA444 properly.
Example
Download the VMA11 – VMA444 – MM100 library from
https://github.com/Velleman/VMA11. The easiest way to do this, is using the
zip file.
Now, open the Arduino® IDE and add the downloaded VMA11 master zip file
Load the example fm_rds_test sketch.
Compile and upload this sketch and listen to the radio! Do not forget the earphones as an antenna. The volume, channel and RDS controls can be found by opening the serial monitor. See the example below:
Code
include <VMA11.h>
include <Wire.h>
int resetPin = 2; // these are the connections between VMA444 and the UNO
VMA100
int SDIO = A4;
int SCLK = A5;
VMA11 radio(resetPin, SDIO, SCLK);
int channel;
int volume;
char rdsname[9];
char rdsrt[65];
char previousRadioText[65];
uint8_t lastChar;
void setup()
{
Serial.begin(9600);
Serial.println(“\n\nVMA11 Test Sketch”);
Serial.println(“===========================”);
Serial.println(“a b Favourite stations”);
Serial.println(“+ – Volume (max 15)”);
Serial.println(“u d Seek up / down”);
Serial.println(“r Listen for RDS Data (15 sec timeout)”);
Serial.println(“R Listen for RDS Data (15 sec timeout)”);
Serial.println(“Send me a command letter.”);
radio.powerOn();
radio.setVolume(1);
volume=1;
radio.setChannel(1021);
memset(previousRadioText,0,65);
memset(rdsrt,0,65);
}
void loop()
{
if(radio.readRDSRadioText(rdsrt))
{
if(strcmp(rdsrt,previousRadioText))
{
Serial.println(rdsrt);
strcpy(previousRadioText,rdsrt);
}
}
if (Serial.available())
{
char ch = Serial.read();
if (ch == ‘u’)
{
channel = radio.seekUp();
displayInfo();
}
else if (ch == ‘d’)
{
channel = radio.seekDown();
displayInfo();
}
else if (ch == ‘+’)
{
volume ++;
if (volume >=16) volume = 15;
radio.setVolume(volume);
displayInfo();
}
else if (ch == ‘-‘)
{
volume –;
if (volume < 0) volume = 0;
radio.setVolume(volume);
displaying();
}
else if (ch == ‘a’)
{
channel = 1015; // Rock FM
radio.setChannel(channel);
displayInfo();
}
else if (ch == ‘b’)
{
channel = 925; // KBCO in Boulder
radio.setChannel(channel);
displayInfo();
}
else if (ch == ‘r’)
{
// The calling of readRDS and printing of rename really need
// to be looped to catch all of the data…
// this will just print a snapshot of what is in the Si4703 RDS buffer…
radio.readRDSRadioStation(rdsname);
Serial.println(rdsname);
}
else if (ch == ‘R’)
{
// The calling of readRDS and printing of rdsrt really need
// to be looped to catch all of the data…
// this will just print a snapshot of what is in the Si4703 RDS buffer…
//Serial.println(“RDS listening – screen”);
radio.readRDS(rdsname,rdsrt,&lastChar);
Serial.println(result);
}
}
}
void displayInfo()
{
Serial.print(“Channel:”); Serial.print(channel);
Serial.print(” Volume:”); Serial.println(volume);
}
More Information
For more information about the VMA444, please visit
www.velleman.eu.
RED Declaration of Conformity
Hereby, Velleman NV declares that the radio equipment type VMA444 is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.velleman.eu.
Use this device with original accessories only. Velleman NV cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of
this device. For more info concerning this product and the latest version of
this manual, please visit our website
www.velleman.eu. The information in this manual is
subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman NV. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or
reduced to any electronic medium or otherwise without the prior written
consent of the copyright holder.
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the
electronics world and currently distributes its products in over 85 countries.
All our products fulfill strict quality requirements and legal stipulations in
the EU. In order to ensure quality, our products regularly go through an extra
quality check, both by an internal quality department and by specialized
external organizations. If, all precautionary measures notwithstanding,
problems should occur, please make an appeal to our warranty (see guarantee
conditions).
General Warranty Conditions Concerning Consumer Products (for EU):
-
All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
-
Velleman® can decide to replace an article with an equivalent article or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
-
Not covered by warranty:
– all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity…), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits; – consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non
-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts… (unlimited list); – flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.
– flaws caused deliberately, negligently, or resulting from improper handling, negligent maintenance, abusive use, or use contrary to the manufacturer’s instructions;
– damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally); – damage resulting from inappropriate packing and shipping of the article;
– all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®. -
Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and completed with the original receipt of purchase and a clear flaw description.
-
Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
-
Repairs occurring after warranty expiration are subject to shipping costs.
-
The above conditions are without prejudice to all commercial warranties.
The above enumeration is subject to modification according to the article (see article’s manual).
Made in PRC
Imported by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.velleman.eu
References
- Velleman – Wholesaler and developer of electronics
- Velleman – Wholesaler and developer of electronics
- GitHub - Velleman/VMA11: This is a library for the Velleman VMA11 fm/rds receiver arduino shield and MM100 mini-module
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>