belkin WIC008 BoostCharge Pro Wireless Car Charger with MagSafe 15W User Manual

June 10, 2024
belkin

belkin WIC008 BoostCharge Pro Wireless Car Charger with MagSafe 15W

belkin-WIC008-BoostCharge-Pro-Wireless-Car-Charger-with-MagSafe-15W-
PRODUCT

Product Information

The product is a wireless car charger with MagSafe technology that charges compatible devices at 15W. The product comes with a 70 gsm wood-free paper user manual that includes an FCC/Legal statement, print specifications, and product design information such as file name, SKU, version, designer, and date. The product is compliant with Directive 2014/53/EU and RoHS Directive 2015/863 and has a CE Declaration of Conformity. The product complies with radiation exposure limits for an uncontrolled environment and should be installed and operated with a minimum distance of 20 cm between the radiator and the user’s body. The product is also compliant with UKCA Conformity: Radio Equipment Regulations 2017 (S.I. 2017/1206).

Product Usage Instructions

To use the wireless car charger with MagSafe, follow these instructions:

  1. Place the charger on a flat surface in your car.
  2. Connect the charger to your car’s power source using the included power adapter.
  3. Place your compatible device on the charger, making sure it aligns with the MagSafe technology.
  4. Your device will start charging automatically.
  5. To remove your device, simply lift it off the charger.

Caution: If you experience any problems with the wireless charger, stop using it immediately, disconnect the power adapter from the outlet, and contact Belkin for assistance. Refer to the user manual for information on product disposal and recycling programs in your area.

Safety Instructions

WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage to the user, product, or other property.

  1. Connect the power supply of the wireless charger to a power outlet that is close by and is easy to disconnect from the source.

  2. Use indoors and in a dry location only; Avoid charging near sources of heat and humidity.

  3. Keep the wireless charger and power supply away from any liquids or moisture.

  4. Unplug the wireless charger when not in use for long periods of time.

  5. Do not store your device in very hot or very cold locations. It is recommended to use your device at room temperature.

  6. Do not use if visible defects are observed on the wireless charger or power supply.

  7. Do not attempt to service, modify, or disassemble the wireless charger or power supply.

  8. Use of a power supply not recommended or sold by Belkin may result in an increased risk of fire, electric shock, injury, or damage to
    the user, product, or other property.

  9. The wireless charging power transmission rate is regulated by the wireless charging device receiving power which can be influenced by factors like, but not limited to, proprietary charging protocols, ambient temperature, current battery percentage level, and age of the device being charged.

CAUTION: If you experience problems with the wireless charger, please discontinue use, unplug the power supply from the socket, and contact Belkin
for assistance.
The marking information is located on the bottom of the apparatus.

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc. El Segundo, CA 90245, USA, Tel: +1(310) 751 5100, declare under our sole responsibility that this product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the distance between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate
this equipment.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

Innovation, Science, and Economic Development Canada Statement (ISED):

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator and your body.

Innovation, Science, and Economic Development Canada Statement:
This digital apparatus complies with CAN ICES-003(B) / NMB-003(B).

  • Belkin International, Inc. El Segundo, CA 90245, USA
  • Belkin Ltd., Unit 1, Regent Park, Booth Drive, Wellingborough, Northants NN8 6GR, United Kingdom
  • Belkin B.V., Herikerbergweg 106, Plaza Arena – Jupiter, 1101 CM, Amsterdam, The Netherlands
  • Belkin Asia Pacific Ltd. Hong Kong
  • Belkin Ltd. Tuggerah, Australia
  • [email protected]
  • Belkin Tech Support: www.belkin.com/support

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

belkin User Manuals

Related Manuals