CE LINK WPC25-3TCNA Wireless Charger User Manual
- June 3, 2024
- CE-LINK
Table of Contents
CE LINK WPC25-3TCNA Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before using this product. Please
keep this manual for reference in the future.
INTRODUCTION
This product is a wireless charging device in accordance with the QI protocol which is suitable for mobile phones, and other devices based on wireless charging 5W, 7.5W or 15w. Connect the wireless charger to a power supply and then you can charge your device which is supported wireless charging (mobile phones, etc) by put it on the wireless charger directly.
FEATURES
- Transmitting terminal input: 15V/3A, 12V/3A
- Transmitting terminal output1(magsafe): 5W/7.5W/15W
- Transmitting terminal output2: 5W
- Transmitting terminal output3(Apple Wacth): 5W
- Compliant with CE, FCC standards
- It is light, smart and convenient to use
- Compatibility:
- output1:iPhone12,iPhone12min,iPhone12Pro,iPhone12 ProMax
- Output2: wireless Airpods
- Output3: Apple Wacth
SPECIFICATIONS
Input | Type-C: 15V/3A, 12V/3A, (PD adapter) |
---|---|
Output | 15W+5W+5W Max |
Wireless Charging Frequency | 127.7KHz/110-205KHZ |
Operating Temperature Range | 0~30°C |
Storage Temperature Range | -20 ~ 40°C |
Operation Humidity | 10% ~ 80% RH |
Storage Humidity | 5% ~ 95% RH |
Size | 19990.8128.8±0.5mm |
Weight | 650±10g |
PACKING LIST
Before using this product, please check the packing and make sure the following items are contained in the packing:
- Main unit×1
- User Manual×1
OPERATION GUIDANCE
Operation Procedures
- Connect the wireless charger to the power supply and the blue light will be on during standby.
- Place your device (which supports wireless charging) on the wireless charger
- When finished charging, the blue light will stop breathing.
- Please take out the device after it is fully charged.
Operation Notes
- For optimum performance, please use the wireless charger according to this user manual.
- Please connect the wireless charger to the power adapter. When you need 15W+5W+5W wireless output, the output capacity of your adapter should include 15V3A/12V3A.It is compatible with PD adapters.
- Please unplug the wireless charger after using.
- Do not use the wireless charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that wireless charger will be a little overheated in the use process.
- When the wireless charger stops working under some accidents, you need to check whether the device is compatible with this wireless charger.
- Do not let the wireless charger close to fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger does not work, please contact the local merchandise or dealer.
- Do not place metal objects on the back of the phone while it is charging wirelessly.
CONNECTION DIAGRAM
FCC Warning
This device complies with part 18 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: If any change or modification of the equipment is not explicitly
approved by the party responsible for compliance, the user shall have no right
to operate the charger; otherwise the user shall be liable for the
consequences.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5
-
Max. Electric Field Emissions: 6.25V/m
Max. Magnetic Field Emissions: 0.54V/m -
The maintenance of the system is the responsibility of the manufacturer.
-
To prevent interference, the product should be as far away from devices operating at the same frequency as possible.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>