CE-LINK WPC05-1LXNA Wireless Charger User Manual
- June 1, 2024
- CE-LINK
Table of Contents
Wireless Charger
WPC05-1LXNA
User Manual
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This product is a high-performance wireless charger. This product is suitable for apple watch , Connect the wireless to a power charger, and then you can charge your apple watch by put it on the charger directly.
2.0 FEATURES
- Transmitting terminal input: 5V/1A
- Transmitting terminal output: 3W
- Intelligent green indicator to show working condition
- Compliant with QI, CE, FCC standards
- It is light, smart and convenient to use
3.0 SPECIFICATIONS
| Input | 5V/1A |
|---|---|
| Output | 3W Max |
| Operation Temperature Range | 0~40°C |
| Storage Temperature Range | -20 ~ 70°C |
| Operation Humidity | 10% ~ 80% RH |
| Storage Humidity | 5% ~ 95% RH |
| Size | |
| Weight | 20g±3g |
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
5.0 OPERATION
Operation Procedures
- Connect charger to the power adapter,
- Place your apple watch on the charger, then watch start charge
- Please take out the device after it is fully charged.
Note: red light for flashing when malfunction occurs.
Operation Notes
- For optimum performance, please use charger according to this user manual.
- Please connect the wireless charger to a power adapter which output 5V/1A,
- Please unplug the charger after using.
- Do not use the charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that charger will be a little overheated in the use process.
- When the charger stops working under some accidents , you need to check whether the device is compatible with this charger.
- Do not let the wireless charger close to fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner.
- If the wireless charger cannot work properly, please contact the store or distributor in your area.
6.0 CONNECTION DIAGRAM
FCC Warning
This device complies with part 18 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
Max. Electric Field Emissions: 6.06V/m Max.
Magnetic Field Emissions: 0.54A/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible.
P/N