Ce Link WPC20-3XJNA Wireless Charger User Manual
- June 4, 2024
- CE-LINK
Table of Contents
WPC20-3XJNA Wireless Charger
Wireless Charger
WPC20-3XJNA
User Manual
Apple watch Charger
Apple watch Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety,
please read these instructions carefully before connecting, operating or using
this product. Please keep this manual for future reference.
1.0 INTRODUCTION
This product is a high-performance wireless charger. This product is suitable for mobile phones, apple watch and airpods. Connect the wireless to a power charger, and then you can charge your device supported wireless charging by put it on the charger directly.
2.0 FEATURES
- Transmitting terminal input: 12V/2.5A
- Transmitting terminal output: 2.5W/5W/10W
- Intelligent indicator to show working condition
- Compliant with QI, CE, FCC standards
- It is light, smart and convenient to use
3.0 SPECIFICATIONS
Input
|
12V/2.5A
---|---
Output
|
2.5W/5W/10W
Operation Temperature Range
|
0~40°C
Storage Temperature Range
|
-20 ~ 70°C
Operation Humidity
|
10% ~ 80% RH
Storage Humidity
|
5% ~ 95% RH
Size
|
W121.44mmH51.40mmL181.00mm
Weight
|
174g±3g
4.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
- Main unit×1
- User Manual×1
- Adapter×1
5.0 OPERATION
Operation Procedures
- Connect charger to the power adapter.
- Place your device on the charger, and the light will flash one time, and then the blue light will be on during standby.
- Please take out the device after it is fully charged. Note: green light for flashing when malfunction occurs.
Operation Notes
- For optimum performance, please use charger according to this user manual.
- Please connect the wireless charger to a power adapter which output 12V/2.5A,
- Please unplug the charger after using.
- Do not use the charger with an electronic product which is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
- It’s normal that charger will be a little overheated in the use process.
- When the charger stops working under some accidents, you need to check whether the device is compatible with this charger.
- Do not let the wireless charger close to fire, such as stove, candles and etc.
- Do not let the wireless charger soak into liquid, such as swimming pool, bathtub, etc.
- Do not wash the wireless charger with corrosive cleaner. 10. If the wireless charger cannot work properly, please contact the store or distributor in your area.
6.0 CONNECTION DIAGRAM
FCC Warning
This device complies with Part18 of the FCC Rules.
Refer to FCC Part 18.213(c) and KDB 784748 Anner A section A.5:
Max. Electric Field Emissions : 0.8818 V/m
Max. Magnetic Field Emissions 0.3855 A/m
(b) The maintenance of the system is the responsibility of the manufacturer.
(c) To prevent interference, the product should be as far away from devices
operating
at the same frequency as possible
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth
for an
uncontrolled environment. Th is equipment should be installed and operated
with a
minimum distance of 20cm between the radiator and any part of your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>