CE-LINK WPC30-2XCNA Wireless Charger User Manual

: June 5, 2024
: CE-LINK

Table of Contents

INTRODUCTION
FEATURES
SPECIFICATIONS
PACKAGE CONTENTS
OPERATION
CONNECTION DIAGRAM
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Wireless Charger
User Manual

Wireless Charger
DEAR CUSTOMER
Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference.

INTRODUCTION

This product is a high-performance wireless charger. This product is suitable for mobile phones, and other productions based on wireless charging 5W /7.5W /10W/15W. Connect the wireless to a power charger, and then you can charge your device-supported wireless charging (MP3, mobile phones, etc) by put it on the charger directly.It is helpful in long-time journeys and convenient for business!

FEATURES

Transmitting terminal input: 15V/3A
Transmitting terminal output: 5W/7.5W/10W/15W
Intelligent two-color indicator to show working condition
Compliant with CE, FCC,QI(EPP) standards
It is light, smart and convenient to use

SPECIFICATIONS

Input	15V/3A
Double Wireless charging output	5W 7.5W 10W 15W
Switch Frequency	110K-205K
Operating Temperature Range	0-40°C
Storage Temperature Range	-20 — 70°C
Operation Humidity	10% ” 80% RH
Storage Humidity	5% — 95% RH
Size	195(L) 90(W)13.86 mm±0.2
Weight	190g±10

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

Main unit×1
User Manual×1

OPERATION

Operation Procedures

Connect the wireless charger with a powered adapter, the white light flashed twice.
Put your device (supported wireless charging) on the charger bright white light.
When finished charging bright white light.
Please remove your device after fully charged.
Note: When an accident occurs, the light flashes green.

Operation Notes

For optimum performance, please use the wireless charger according to this user manual.
Please connect the wireless charger to a power adapter whose output should be 15V/3A.
Please unplug the wireless charger after using it.
Do not use the wireless charger with an electronic product that is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
It’s normal that a wireless charger will be a little overheated in the use process.
When the wireless charger stops working under some accidents occur, you need to check whether the device is compatible with this charger.
Do not let the wireless charger close to fire, such as stove, candles and etc.
Do not let the wireless charger soak into liquid, such as a swimming pool, bathtub, etc.
Do not wash the wireless charger with corrosive cleaner.
If the wireless charger cannot work properly, please contact the store or distributor in your area.
This device complies with Part 18 and part 15 of the FCC Rules Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
(2) This device must accept any interference received
Including interference that may cause undesired operation
FCC ID : A4X-WPC30-2XCNA
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator & your body.