CE-LINK WPC15-1TJNA Wireless Charger User Manual

CE-LINK WPC15-1TJNA Wireless Charger

DEAR CUSTOMER

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or using this product. Please keep this manual for future reference.

INTRODUCTION

This product is a high-performance wireless charger. This product is suitable for mobile phones, MP3, MP4, digital productions, and other productions based on wireless charging 5W or 10W, or 15W. Connect the wireless to a power charger, and then you can charge your device-supported wireless charging (MP3, mobile phones, etc) by put it on the charger directly. It is helpful for long- time journeys and convenient for business!

FEATURES

• Transmitting terminal input: 5V/2A, 9V/2A ,12V/2A(compatible with PD/QC)
• Transmitting terminal output: 5W/7.5W/10W/15W
• Intelligent green indicator to show working condition
• Compliant with QI, CE, FCC standards
• It is light, smart and convenient to use

SPECIFICATIONS

Input| Type-C 5V/2A, 9V/2A, 12V/2A

(compatible with PD/QC)

---|---
Output| 5W/7.5W/10W/15W
Switch Frequency| 112K-205K
Operating Temperature Range| 0~30°C
Storage Temperature Range| -20 ~ 70°C
Operation Humidity| 10% ~ 80% RH
Storage Humidity| 5% ~ 95% RH
Size| W92.5mmH105mmT96.5mm
Weight| 95g±3g

PACKAGE CONTENTS

Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:

• Main unit×1
• User Manual×1

OPERATION

Operation Procedures

1. Connect the wireless charger to the power adapter, the red light will be on during standby.
2. Place your device (which supports wireless charging) on the charger and the green light will keep breathing.
3. When finished charging, the light will Keep breathing.
4. Please take out the device after it is fully charged.
   Note: red light for flashing when a malfunction occurs.

Operation Notes

1. For optimum performance, please use the wireless charger according to this user manual.
2. Please connect the wireless charger to a power adapter whose output should be 5V/2A, 9V/2A, and 12V/2A.
3. Please unplug the wireless charger after using.
4. Do not use the wireless charger with an electronic product that is not in conformity with the specifications, so as to avoid any problem caused by specification mismatching.
5. It’s normal that a wireless charger will be a little overheated in the use process.
6. When the wireless charger stops working under some accidents, you need to check whether the device is compatible with this charger.
7. Do not let the wireless charger close to fire, such as stove, candles and etc.
8. Do not let the wireless charger soak into liquid, such as a swimming pool, bathtub, etc.
9. Do not wash the wireless charger with corrosive cleaner.
10. If the wireless charger cannot work properly, please contact the store or distributor in your area.
11. Do not place metal objects on the back of the phone while it is charging wirelessly.Please check that there is no metal foreign body on the back of your mobile phone when using this product.

CONNECTION DIAGRAM

FCC Warning

This device complies with part 18 and part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

IC WARNING

This device contains license-exempt transmitter(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>