SMART WATCHES T13 Smartwatch User Guide
- June 3, 2024
- Smart Watches
Table of Contents
SMART WATCHES T13 Smartwatch User Guide
Instructions for the quick use of the watch
Description of the whole machine
The watch is charged and activated
Charge activation is required before using the watch for the first time, using
the quipped magnetic suction charging cableco attach to the metal point on the
b1r;k of the watch, the other end of the charging cable can be connected to
the USB charging head or computer USB port.
Install the watch APP
Scan the QR code below or enter the major app markets to download and install “Da Fit”
http://plus.crrepa.com/app-download/dafit
Device requirements: ios 10.0 and above; Android 5.0 and above; support Bluetooth 5.0.
Connect the watch
This watch is a dual Bluetooth call watch, if you want to use the watch
properly need to connect two Bluetooth (APP-side Bluetooth and mobile phone
and (audio) Bluetooth)
l. APP-end connection (for data transfer)
Open the APP Binding W11tch to find Tl the watch you need to connect to. If more than one device Is nearby, please filter according to the MAC address of the watch, the connection is successful H shown in the figure:
2: Mobile phone connection (for calls)
- Turn on the watch audio switch: Swipe down on the watch’s main interface, anta the control center, tap the audio switch icon, tum on the audio ,taut hewn Note: When t he watch is low the audio cannot be turned on.
- Go ta the mobile Phone Bluetooth seen page, search and connect the hind table, the connection is successful IS shown:
After the watch is successfully bound, each time the client is opened In the future, the watch will automatically connector the phone and the data can be synchronized by pulling down on the cl1ent date page.
Introduction to the call function
When the watch is connected to the mobile phone, you nan use the witch to
d1el-control the phone to make communication; You can also answer calls from
your phone on your watch. You can also view your watch’s call history.
Note: When using the call function, you need to make sure that your watch is connected to your phone in a stable state.
Introduction to the function of the watch
Basic parameters:
Connection method: Bluetooth connection Input: 5V/100mA Battery: DC 3.7V
240mAh 0.88Wh Device Requirements: Android 5.0 or iOS 10.0 and above
Precautions:
- It is forbidden to use an adapter with a charging voltage greater than 5V and a charging current greater than 2A, and the charging time is 2-3 hours.
- It is forbidden to charge with water stains.
- Do not disassemble the casing of this product without authorization, the product will be damaged and the warranty will be lost.
Special note:
-
This product is not a medical device, the measurement results are for reference only, not as any Medical Use and Rationale. Please follow the doctor’s instructions, do not
rely on this test result Self-diagnosis and treatment. -
This manual is produced based on the existing information, in line with continuous improvement and continuous development The company reserves the
product specification and function changes, and the description of this manual the right to make modifications and improvements to any product described.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help. The
device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.