MOVEHILLS V15 PRO Monitor User Manual
- June 16, 2024
- MOVEHILLS
Table of Contents
MOVEHILLS V15 PRO Monitor
Product Introduction
What’s in the Box
Please contact us if anything is missing or damaged.
Identifying Parts and Controls
Туре-С
Audio and video signal transmission; Power supply, supports reverse charging,
compatible with PD3.0 protocol, supports 5-20V input.
Switch Key
short press to swich to 2-in-1 display mode, long press to switch to
presentation mode.
+ Key
press to open the brightness menu, turn up the volume or brightness.
– Key
press to open the volume menu, turn down the volume or brightness.
Power/Menu Key
Press to enter the menu interface, long press to power on/off the monitor.
How to hold the monitor
You can use the leather stand to hold
Or you can just use it without stand as the following.
Setup and Connection
V15 PRO Monitor only supports Type C connections, please do not use the HDMI cable to connect the monitor.
Connect the Laptop/PC with a Type-C to Type-C Cable
Note: Not all laptops/PCs with a Type-C port can work with Movehills
monitor. Please check the Type C port of your laptop if it supports audio and
video signal transmission If you need to increase the V15 PRO brightness,
please plug in the PD 65W adapter with Type-C to Type-C cable
Note:
- Please use the wall charger to power on the monitor to avoid black or flashing screen when power supply is not enough.
- The Type-C port of some devices does not support display and only supports charging. If it displays “No Signal”, please contact us for help.
Connect the Phone with a Type-C to Type-C Cable
Only works directly with cell phones through a full-featured Type-C port.
Note: Because the mobile phone cannot provide enough power to support the
high-power operation of the monitor when you want to increase the brightness
of the display to more than 30, please connect an external power supply with
our PD 65W adapter.
Note:
- Phones may not be able to provide enough power supply for monitor with high brightness, please plug in wall charger to Type-C port to power on the monitor, then plug in USB-C cable connected to phone to another Type-C port.
- Some phones like Google Pixel do not support video output.
Not all mobile phones support external monitors, you can refer to the table below to see if your mobile phone supports external monitors.
Connect the Phone with a Type-C to Type-C Cable
-
Enter the system Settings.
-
Enter Display settings.
-
Scroll down to select Duplicate these displays or Extend these displays.
-
For extended displays, you can drag the displays to rearrange them to match the actual position of the monitors and click Apply to confirm your rearrangement.
Note: if you are not sure the actual number for each monitor, click Identify and the number will be shown on each monitor. -
For triple displays, if you want to duplicate desktop on 2 and 3, please click on display 2 or 3 first.
-
-
Portrait Display Setting: scroll down the Display orientation menu and select Portrait or Portrait (flipped).
- Portrait: the actual screen setup is the keys and the type c port is at the bottom.
- Portrait (flipped): the actual screen setup is the keys and the type c port is at the top.
Mac Multiple Display Setup
Note: Mac OS only supports one extended display, for dual or more extended displays, it needs to use our Movehills software to implement the dual extended displays.
-
Enter the System Preferences and click Displays. If it is a Mirror display by default, you can go to step 2 to extend your display.
If it is the extend display by default, you can drag the display to rearrange the position to match the actual position of the monitors.
-
Click Display Settings, and then scroll Down to the Use as area and select Stop Mirroring to use as the extended display.
-
For triple extended display setting. press the Switch key to enter the 2-in-1 display mode first. And install the Movehills software in your Mac.
-
Click your different display content and use the Movehills menu to make the display content up or down for landscape mode, left or right for portrait mode.
Quick Switch the Display Mode
Regular Dual/Triple Display Mode
After connecting to the laptop/PC, configure the display mode according to
sections 2.3 and 2.4.
2-in-1 Display Mode
- Press the Switch key (less than 1 second) to enter the 2-in-1 display mode,
- Press the Switch key again it will turn back to the regular display mode.
Presentation Display Mode
Long press the switch key (more than 1 second) to enter the presentation
display mode, long press the switch key again it will turn back to the regular
display mode.
Quick Switch the Display Mode
Calibration Steps for Windows
- Enter the Control Panel menu by typing the “Control Panel” in the settings menu or PC folders.
- Enter the Hardware and Sound menu, and then click the Tablet PC Settings.
- Click the Setup at the Tablet PC Settings interface, and then click Setup.
- Click the Pen input to calibrate the stylus pen input for the V15 PRO monitor. As the following prompts will be displayed on one of the screens, press the Enter key till to move to the bottom touchscreen of the V15 PRO, then use the syluse pen to tap the screen.
- Click Setup again in the Tablet PC Setting menu and chose the Touch input to calibrate the finger input for the V15 PRO. As the following prompts will be displayed on one of the screens, press the Enter key till to move to the bottom touchscreen of the V15 PRO, then use a single finger to tap the screen.
- Then you finish the Pen and Touch input calibration.
Calibration Steps for Mac
You don’t need to do the calibration for Mac, it is plug-and-play for pen and
touch feature. Make sure that the cursor is on the touchscreen when operating
by pen or touch.
Parameter Settings
There is only one parameter setting for dual monitors of V15 PRO. Configure the display parameters according to the following instructions.
- Press the Menu Key to activate the OSD menu.
- Press the +/- Key to switch menus.
- Press the Menu Key to confirm.
- Press the +/- Key to adjust the value.
- Long Press Menu Key (more than I second) to return to the previous page or make the setting menu disappear.
Brightness Settings
- Brightness: The adjusting range is from 0 to 100.
- Contrast: The adjusting range is from 0 to 100.
- Black Level: The adjusting range is from 0 to 100.
- Sharpness: The adjusting range is from 0-4.
Image Settings
- ECO: Contains Six modes (Standard/ Game/ Movie/ Text/ FPS/ RTS Modes)
- DCR: Select ON or OFF to enable or disable dynamic contrast ratio function.
- Aspect: Adjusts the aspect ratio to 16:9 or 4:3 for V15 PRO.
Color Temp Settings
- Color Temp: Contains three preset color modes including User, Cool and Warm mode. In the user mode, the RGB value, can be adjusted.
- Red: The adjusting range is from 0 to 100.
- Green: The adjusting range is from 0 to 100.
- Blue: The adjusting range is from 0 to 100.
OSD Settings (Language/OSD Timer/ Transparency)
- Language: Select OSD language including English, French, German, Simplified Chinese, Italian, Spanish, Portuguese, Turkish, Polish, Netherlands, Japanese, Korean.
- OSD Timer: The adjusting range is from 10 to 60.
- Transparency: The adjusting range is from 0 to 100.
Reset Settings
- Reset: Selects RESET to revert all settings to the factory default mode.
- Mute: Turn on or off the volume of the monitor
MISC Settings
- Signal Source: only Type C for signal input.
- Low Blue Light: The low blue light mode is a display mode that can reduce the exposure of blue light to the eyes, thereby reducing certain visual fatigue. The adjusting range is from 0 to 100. (0/25/50/75/100)
- HDR MODE: Select ON or OFF to open HDR mode. High-Dynamic Range, or HDR for short, can provide more dynamic range and image details than ordinary images, and can better reflect the visual effects in the real environment.
Specifications
FAQ
Black screen or No signal
- Please use the original accessories we provide (cables and chargers). USB 3.0 A Male to USB Type C cable does not support video signal transmission.
- Please plug in the wall charger to the Type-C port for the power supply and wait for the screen to display “no signal”, then plug in the USB-C cable to another Type-C port.
- For single USB-C connection for power and display, the Type C port of some devices like the HP Elitebook, and Acer Aspire does not support video output and only supports charging. Please contact us to help you confirm if your device supports it.
- Please set the display mode to Extend in Windows.
- Connect the monitor to other devices to check if the monitor can work well with other devices.
- Please contact us for help info@movehills.com.
The monitor keeps flashing/rebooting.
- Flashing or continuously restarting is usually caused by not enough power supply. If the monitor and your host are connected by a single USB-C cable, some laptops and phones cannot provide enough power supply for this monitor. Please plug in the wall charger to Type-C port of the monitor for enough power supply.
- Please contact us for help info@movehills.com.
My Android Phone is equipped with a Type-C port. But it does not work with this monitor.
- Phones may not be able to provide enough power supply for the monitor, please plug in the wall charger to the Type-C port, then connect the phone to another Type-C port by USB-C cable.
- The Type-C port of some phones does not support display and only supports charging. For example, the Type-C port of Google phones like Pixel does not support video output.
Why there is no signal by plugging in the USB-C hub?
- The regular USB C hub, the type C port does not support the video signal transfer, only supports data transfer for USB.
- If you like to use the hub to extend multiple ports for your laptop/PC, please use the Thunderbolt hub, and note that there is the thunderbolt logo beside the type C port.
Can the type C cable reverse charge to the phone/laptop/PC? How to make the
cable connection?
Yes, the DualViews monitor can charge to the host why the laptop or PC, so you
can just connect to our PD 65W adaptor to the monitor, it will reverse charge
to the host device.
Why does the brightness or volume setting reset each time I reboot the
monitor?
To avoid not enough power supply for different PCs/Laptops/Phones without the
external power supply, the 15 PRO uses the default value of brightness and
volume. If you need to remember your previous setting value. You need to
connect the external power adaptor (it is better to use our PD65W adaptor).
Contact us
If you encounter any issues with the product, please contact the Movehills
team to promptly receive troubleshooting tips or a replacement.
- Email: info@movehills.com
- Email: support@movehills.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>