SMART WATCHES KW76 1.69 Display Smart Watch User Manual
- June 6, 2024
- Smart Watches
Table of Contents
SMART WATCHES KW76 1.69 Display Smart Watch
Notes:
- The company reserves the right to modify the contents of this manual without any further notification. It is normal that some functions may vary in different software versions.
- Please charge the smartwatch with configured charger for no less than 2 hours before use.
- Please install and connect to the suggested App and set personal information before use. Please refer to the below guidance and use the smartwatch properly.
Wearing method
Please wear the device on your wrist horizontally, about one finger from the
carpal and adjust it to a comfortable position. Below picture as a reference.
Note: Please wear the device a bit tighter when making heart rate testing
.
App Download and Pairing
- Long press the side button to turn on the device, slide down from main interface, open “setting” page — App QR code, use your mobile phone to scan the code. Or you can also scan below QR code or search for “Dafi t ” in the App store.
- Open the App and BT, search and select the corresponding device on App as guided.
Notes:
- Please keep BT on during paring to ensure successful connection.
- Please long press side button 3s to reboot the device if couldn’t find the device during paring. Or choose reset on the device and search the device again.
Operation
- Shortcut Setting Page: Swipe down from the homepage.
- Check Message: Swipe up from the homepage.
- Open Main Menu: Swipe right from the homepage.
- Functions Shortcut Interface: Swipe left from the homepage.
- Switch Watch Dials: Long press the dial for 3s and slide left or right to choose.
- Turn-ON/OFF: Long press side button 3s to power on; From home page, long press side button 3s, and tap ✓ to power off.
- Return to Previous Menu/ Screen ON or OFF: Press side button once.
Functions
Pedometer:
Record daily steps and details. Historical data are visible on the App.
Sleep Monitor:
Record daily sleep t ime, statues and changes. Historical data of the past 7 days are visible on the App.
Heart Rate Monitor:
24H real- time heart rate monitor/ automatic heart rate detection per 30 minutes. Historical data are visible on the App.
8 sports modes:
Walking, Running, Cycling, Skipping, Badminton, Mountaineering, Yoga, and Sit- ups. Latest one exercising data showed on the watch and more analysis information and records are visible on the App.
Blood Pressure Monitor:
Blood pressure testing; the latest 7 records and more analysis testing data are visible on App. (Data cannot be used for medical purpose)
Blood Oxygen Monitor:
Blood oxygen testing; the latest 7 records and more analysis testing data are visible on App. (Data cannot be used for medical purpose)
Weather Data:
After connecting with App, show daily weather and next 6 days’ weather forecast.
BT Camera control:
Remote control the mobile phone to take and save photos via App.
Music Control:
Remote control the music player of mobile phone. Play/ Pause/ Switch to previous or next song.
Breathe traing:
The watch can offer exercise guidance for breathe training.
Stopwatch:
Tap the stopwatch icon to enter the interface.
Alarm:
You can set three alarms on the App. The watch would vibrate at the setting time.
Countdown Timer:
1/3/5/10/15/30/60/120 minutes countdown available.
Flashlight:
Tap the flashlight icon to turn it on.
Settings
Shortcut interface style/ Brightness/ Vibration switch/ Theater mode/ Reset/ Power off/ About the watch/ App download
Other functions
Sedentary Reminder, Low Battery Alert, Call Reminder, Find The Device, Find The Phone, Online DIY Watch Faces, 12/24 Time Format. Unit Set. Wake- up Gesture, Water- Drinking Reminder, Heart Rate Alert, Female Period Reminder, Sport Goal Reminder.
Charging
Attach the charging cable t o the watch charging port. ensuring the metal pins fully connected. Please use the correct charging adapters which are 5V 1 A. Note: If smart watch can not be powered on after being left unused for long t ime, please clean up the charging metal pins to make sure connecting well.
Warranty
- One-year warranty for default hardware defect ives. half of year for battery and charging cable.
2. Below reasons cause to defectives are not included in free warranty service:
- Personal assemble or disassemble.
- Falling damage during use.
- All man-made damage or due to the third party’s fault improper use(such as:
water in the smartwatch. external force shattering, scratch during use etc).
3. Please provide a warranty card with the details filled when a request for after selling service.
4. Please contact direct dealers for warranty service.
5. Please note all functions of the product are based on physical objects.
Notes : Products with batteries cannot be disposed of with household waste. Please send this product to WEEE collecting points near you.
Warranty Certificate
Warranty Certificate
Client Info|
Product Type| | Vendor| (Stamp)
Client Name| | Contact Info|
Vendor’ s Con tac t| | Purchase Date|
Pro duct IMEI Code
|
Client’ s Address
|
Vendor’ s Address
|
Warranty Record
Date| Problems| Diagnosis| More Inf o
| | |
| | |
| | |
| | |
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>