ASTSH A1HiSp2TDdL Wireless TV Headphone User Guide

ASTSH A1HiSp2TDdL Wireless TV Headphone

PACKAGE INCLUDE

1. Headphone
2. RCA to 3.5mm cable
3.  Adapter (5V/1A)
4.  Transmitter & Charging base station
5. Optical cable
   

PRODUCT OVERVIEW

1. Build-in Microphone

2. Pogo pin for charging

3. LED indicator

4. Microphone on/off

5. Balance volume control(L/R)

6. Volume control

7. USB-C charging port

8. Power ON/OFF

9. 3.5mm input for wired use
   

10. EQ mode LED

11. Connect /Charging LED indicator

12. Audio source switch(Optical/3.5mm)

13. 3.5mm input

14. Optical input

15. USB-C for power

16. EQ switch touch button
    

CONNECT TO TV

Use the adapter to connect the base station for power up.
Power up the headphone, and will see the LED indicator on headphone and Base station turn to solid Blue.

1. 3.5mm audio source
   Use the RCA to 3.5mm cable connect your TV(RCA output Jack) to Base station(3.5mm Input jack).
   You can also use 3.5mm to 3.5mm cable connect (TV headphone jack) to Base station(3.5mm input jack) You can also use.
   You can also use 3.5mm to 3.5mm cable connect Mobile/sound Bar to Headphone directly.

2. Optical audio source
   Use the OPTICAL cable connect your TV(optical output) to Base station(optical input) Select the audio output to optical in your TV setup menu.

This headphone can support Optical audio out/ Audio out/ earphone out. Need use converter to support iPhone lighting or Coaxial

SETUP TV MENU

TV AUDIO Out Checking and TV Speaker Setting(Use TV remote control) if you can not hear sound from your headphones after connecting:

1. Ensure use TV Red/White RCA ports labeled “AUDIO OUT or OUTPUT ”，other Red/White ports are incorrect.
2. Ensure your TV speaker is set to External Speaker
3. Use the RCA cable (OPTICAL cable) to plug the headphone into the RCA (OPTICAL) output of the TV to test if you can hear the TV sound.

If you hear constant noise：

1. Make sure your TV menu audio format set to “PCM” mode. (We can’t support Dolby or DTS)

Notes:
*If your TV only support single sound out, the TV speaker will be either automatically muted when you plug something into an audio out port (OPTICAL/RCA/AUX, etc.) or they become disabled once you choose External Speakers of your TV audio output. It depends on TV circuit design.

CHARGING

1. You can hang the headphone to the base station for charging, make sure that the headphone and the base are in correct contact, and the charging indicator light is on.
2. You can also use the adapter to charge the headphone.
   LED indicator will Red when charging, will off when charging full.
   *The headphone will turn off automatically when the power exhausted

PAIRING

1. Press and hold the Pairing button for 3 seconds and release, you will see the LED indicator blue blinking.
2. At the same time, press and hold the transmitter pairing button for 3 seconds and release, until the LED indicator blue rapidly.
3. Pairing will be completed automatically, and there is no need to pair again for use.

Note:
The headphone has been paired before shipment and user no need to pair when use.

BALANCE CONTROL

Balance Control:
If the hearing abilities of two ears are not the same, you can open the decorative cover on the right side of the headphone and then rotate the BALANCE knob for right/left volume adjustment so that you can hear equally well with both ears.

EQ mode

Touch the Transmitter/Base station touch area lightly to switch different EQ modes

The EQ mode will be saved and automatically maintained at the next boot.

LED & BUZZER INDICATION

base
1# Blue LED lighting steady| Wireless working mode
1# Blue LED flash slowly| Lost connect with Headphone
1# Blue LED flash quickly| Pairing mode
1# LED Red| Charging on the base
2# LED OFF| Normal mode
2# LED Orange| Bass mode
2# LED Purple| Voice mode
2# LED Green| Treble mode
2# LED White| Treble + Bass mode

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>