SMART WATCHES P66 Smart Watch User Manual

June 3, 2024
Smart Watches

SMART WATCHES LOGO

P66 Smart Watch
User Manual
SMART WATCHES P66 Smart Watch

Smart Watch

All pictures in this manual are only for illustration. The functions and firmware of the product will be updated aperiodically. Please feel free to contact us via orders if you have any product questions.

Charging Diagram

Please operate strictly as shown as the below pictures:

  1. Please align the charging cable to the contacts on the back of the watch.

  2. Please plug it into a USB Port on computer, charging base or power bank to charge. (The USB adapter is ot included in the package.)

  3. Make sure the USB plug of the charging cable is firmly connected to the port. When the watch vibrates and the battery icon with% appears on the screen, it means the
    charging is normal.

  4. Please charge the watch before use. The charging process takes about 2 hours. It is suggested not to charge the watch too long. When the charging is completed, please
    cut off the power in time. SMART WATCHES P66 Smart Watch -
fig1

App Installation

  1. Download App
    Please use the watch with GloryFit App. You can download ‘GloryFit’ from App Store or Google Play or by scanning the QR Code below:
    SMART WATCHES P66 Smart Watch - qr codeGloryFit App is compatible with:SMART WATCHES P66 Smart Watch -
icon Note : It only works with smart phones, not with tablet or personal computers

  2. Account Registration and Login
    Register an account with email. You’d better remember the email and password for the future login

  3. Device Pairing
    It is required to turn on the Bluetooth and allow GloryFit to access the GPS on your mobile phone during the pairing.
    Warm Tip: Do not connect the watch directly in Bluetooth list.
    Operation Method:
    In the App- ‘Device’, click ‘Select device’ to search.
    Find the watch (P66) in the search list and click to bind it.
    After successful connection, it will prompt ‘Pair up with the device?’. Please select ‘Pair’.
    For iOS users, please forget the device in the Bluetooth list when the connection fails.SMART WATCHES P66 Smart Watch - fig2

Note:

  1. Android phones must allow the app to obtain permissions and run in the background, otherwise it will affect the user experience.

  2. For iOS 13 and above, you can get one-click pairing in the app.
    If the system is lower than i0S 13, you need to connect the P66 for the second time in the iPhone’s Bluetooth list after the first connection in the app. ( The watch ID should
    be the same during each connection.)

  3. If the device is not shown in the search list, please check if it is connected in the Bluetooth list. If connected, please forget this device in Bluetooth.

  4. Under connection, keep the distance between the phone and the watch within 1 meter and the enough battery power of watch.
    If the above operations are invalid, please refer to the FAQs 1.

watch Instruction

  1. Power Key Instruction
     | Press| Long press
    ---|---|---
    | (l)Screenon/off
    {2)Return
    {3)Pause| (1)Power on
    (2)Poweroff
  2. Interface Instruction
    Swipe the screen to enter different interfaces, the various interfaces are shown as below:SMART WATCHES P66 Smart Watch - fig4

Functions Introductions

  1. WatchFaces:
    Setting on watch: Long press the screen, the watch faces will appear after vibration. Or swipe down the screen and tap ‘Setting-Watch face’. Then swipe the watch screen horizontally to select the watch face you like.
    Setting in the App: Login your Account in the App. Then select ‘Device’ »’Watch faces’. You can also select ‘Custom dial’ and choose a photo you like as the watch face.
    In addition to display time, some dials can also display information such as heart rate, steps, calories, weather.

  2. Call Function:
    After the watch is connected to the mobile phone, swipe right on the main interface of the watch and click the ‘call function’ >» ‘switch’ to turn on/off the Bluetooth call
    function at any time.
    You can also directly swipe down on the main interface of the watch to view the quick settings bar, dial, or turn on/off the Bluetooth call function.
    More details can be found at FAQs 5.

  3. Message Notification:
    When the watch is connected to the phone, please turn on ‘Call reminder’ and ‘App reminder’ in the App and allow notification access for GloryFit in the phone. The watch will display text messages, incoming calls and app notifications such as Facebook, WhatsApp, Twitter, etc. Each notification can be deleted separately.
    More details can be found at FAQs 2.
    Note : You cannot reply to messages on the watch.
    The watch only receive message displayed in the phone message notification bar. If the phone does not display the message, please check whether the notification permission of app is enabled.
    If the watch does not receive the message notification, please check if the watch is connected. ****

  4. Blood Pressure Monitoring:
    Click to enter the blood pressure interface. After the value is stable, you can view the current blood pressure status.
    More detailed information analysis and data recording can be viewed in the App.
    Note: The measurement results are for reference only and cannot be used as a medical purpose.

  5. Heart Rate Monitoring:
    Click to enter the heart rate interface. After the value is stable, you can view the current heart rate status. For 24/7 real -time heart rate monitoring, please turn on the automatic monitoring in the App. The graph shows daily heart rate curve, max/min/ real time heart rate, which enables user to view the heart rate changes.
    More detailed information analysis and data recording can be viewed in the App.
    Note : The measurement results are only for the fitness reference. It cannot be used as a medical purpose.

  6. Blood Oxygen Monitoring:
    Click to enter the blood oxygen interface. After the value is stable, you can view the current blood oxygen status.
    More detailed information analysis and data recording can be viewed in the App.
    Note : The measurement results are for reference only and cannot be used as a medical purpose.

  7. Sleep Monitoring:
    Sleeping status can be detected and recorded with the correct wearing on the wrist. More detailed information can be shown in the app, including of deep sleep, light  leep and awake.
    It allows users to intuitively understand their sleep status.
    More detailed information analysis and data recording can be viewed in the App.

  8. Breathing Training:
    You can set frequency and duration of breathing training.
    Users can adjust their abnormal heart rate through breathing training, so as to decompress and relax.

  9. Training:
    The watch supports multi-sports modes, including Outdoor Running/ Cycling/ Skipping/ Badminton/ Table tennis/ Tennis/ Alpinism /Walking/ Basketball/ Football/ Baseball/ Cricket/ Volleyball/ Hockey/ Rugby/ Dancing/ Yoga/ Spinning bike/ Sit-ups/ Indoor Running/ Boating/ Gymnastics/ Jumping Jack.
    You can set different exercise goals according to your physical fitness.

  10. Music Control:
    The phone player should be turned on firstly, then the watch can control the previous/ next/ pause/ play of the mobile music player under connection.

  11. Weather:
    The weather function allows you to check the weather conditions for 7 days on the watch and helps you set reasonable travel arrangements. This function can only be used when the watch is connected to the App.
    GPS must be on and the App is allowed to access the phone’s location.

  12. Quick Settings:
    Swipe down the main screen to enter into the quick settings bar, including Do not disturb, Brightness adjustment, Looking for phone, Call function, Theme, Settings.
    You can set the start time and end time of ‘Do not disturb’ in the App.
    When you don’t want to be disturbed during sleep time or other time periods, you will not be disturbed after turning on “Do not disturb’ mode in the app.

  13. MoreFunctions:
    The watch has other functions such as alarm clock (which can only be set in the App), timer, stopwatch, raising hand to activate display, brightness adjustment, sedentary
    reminder, remote control photography, find device, find phones and physiological cycle.

Product Specifications

Model: P66 Screen Type: 1.85 inches
Battery Capacity: 270mAh Charging Voltage: 5V
Charging Time: About 2 hours Bluetooth Version: 5.2
Water-resistant Level: IP67 Charging Mode: Magnetic charge
Operating Temperature: -20 C -45 C Watch Size: H250mm

W39mm
D10.9mm
iOS:| iOS 9.0+| Android:| Android 5.0+
Strap width:| 22mm
Usage time:| About 3-5 days
Standby time:| About 10-15 days

FAQS

1. How to reconnect if the watch fails to connect with the App GloryFit?

– Important notice: It only supports the connection with mobile phone, not the tablets, laptop or personal computers.
– Do not connect the watch directly in Bluetooth list.
– Check the connection status of the watch:
– (1) the watch shows ‘connected’
– Please confirm whether it is connected with other phone.
– Forget the device in the Bluetooth list in the phone and disconnect in the app. Then, restart the watch and reconnect in the app.
– (2) the watch shows ‘not connected’
– Keep the watch screen on and the distance between the watch and phone within 1 meter. Uninstall the app and reset the watch first, then install the app again and connect the watch with phone directly in the app. (Make sure to have enough battery power during connection.)

2. How to receive the messages on the watch?****

– (1) If you have allowed all permissions when installing the app, please open the app GloryFit – Device – App Reminder
– Turn on the app you want to receive notifications. You will receive message notifications at last.
– (2) If you did not allowed all usage permissions when installing the app, please uninstall and reinstall the app, and allow all usage permissions, click Device – App Reminder­
-Turn on the app you want to receive notifications, and you will receive message notifications.
Note:
a. The watch needs to be connected to the app and Bluetooth of the mobile phone.
b. The watch only receive message displayed in the mobile phone message notification bar.
c. Keep the watch and mobile phone within 5 meters.
d. For Android phone users, you need to click ‘Me’ interface in the app, click Permission Settings
– Background Activity Permissions, and allow the app to run in the background to ensure that you can receive messages.
e. For iPhone users, you need to turn on ‘share System Notifications’ of ‘P66’ in the Bluetooth list.

3. Why the measurements of blood oxygen, blood pressure and heart rate are inaccurate?****

(1) Incorrect wearing posture will affect the measurement of heart rate, such as the deviation of the green light detector when the watch is not close to the skin.
(2) Swing of the arm and dislocation of the watch on the skin. If you wear watch too tightly or raise your hand, the blood circulation and heart rate measurement data will be affected.
(3) The correct measurement method is to lay the arm flat, relax and keep still, while making sure the watch is close to the skin.
– Note: Even when worn correctly, individual differences such as skin tone, hair, tattoos and scars can affect the heart rate.
(4) The watch is not intended for medical use, all measurements are for general fitness purposes.

4. What should I do if the steps is inaccurate?****

(1) Fill in the gender, age, height, and weight information in the app, so that the watch can update the algorithm according to the personal physical information.
(2) When you swing your arm, the watch will record your steps. If you walk less than 30 steps in a row, the watch won’t record the steps.

5. How to use Bluetooth calling function?****

(1) Keep the watch connected with app and Bluetooth
(2) Swipe right on the homepage of the watch and click the all function – switch to turn on or off the Bluetooth call function at any time.
Note:
– If the Bluetooth calling function cannot be used, please confirm the connection status in the app and Bluetooth list.
– The watch can still receive the incoming call alerts, when the Bluetooth Call Function is forbidden.

6. How to choose or change the playback device?****

– Android: Click Phone Settings- Bluetooth -P66 – Turn off Media Audio. (The path names of different mobile phone systems are slightly different, please refer to the above steps to set)
– iOS: Swipe down on the homepage on your iPhone, click the Media Audio icon in the upper right corner of the player, and select the iPhone as the default playback device.

SAFETY WARNING

  1. The item is not a toy- do not allow children or pets to play with the product. Always store product out of the reach of children. It may cause chock, if some small parts are swallowed.
  2. The measurement data of this device in heart rate monitor and blood oxygen monitor is only intended for general fitness and wellness purpose. The measurement data is not for the medical purposes. We cannot take the measurement data as a reference to cure or prevent disease.
    Tip: For detailed operating instructions, please refer to the E-user manual.
    Email: p66@fitwatch4u.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals