SMART WATCHES N16 Smart Calling Watch User Manual

SMART WATCHES N16 Smart Calling Watch User Manual

Hardware parameters

Product Description

1. Screen display area
2. Function button
3. Heart rate sensor
4. Magnetic charging contacts
5. Speaker
6. Microphone

Bind your device

a. Download and install the app Download the InxFit app by scanning the QR code or searching the App Store.

Note: Your phone operating system needs to meet the following requirements:

i0S9.0 version or above

Android 6.0 system or above

Support Btuetooth 5.0

b. Binding step
(Note: During the binding process, InxFit will ask you to turn on your phone’s Bluetooth and authorize InxFIT to access your phone’s GPS. IOS users, when binding is wrong, please ignore this device in the phone’s Bluetooth list first.)

1. On the homepage of the app, click the -4.“ in the upper right corner, select [Add Device], and search for your watch. Find your watch (corresponding to the product model) in the device list and click Bind.
   

2. On the homepage of the app, click the “+” in the upper right corner and select [Scan].Then scan the QR code displayed on the watch when it is turned on for the first time. If you accidentally exit the QR code page, select [Device] —> [Settings] —* [OR Code] Search for QR code;
   

3. Data synchronization
   When worn on your wrist, the watch  records a variety of your activity data. You can sync data with the app by launching the InxFit app. then pulling down the page to start data syncing. The synchronization progress is displayed on the page.
   
   Note: please perform a data synchronization at least every 7 days, or the data will be overwritten when the memory is full.

Instructions for use

• a. Charging diagram
  Connect and charge your watch as shown below. We recommend that you charge your watch before turning it on for the first time.
  
  Note: For the first time use, take out the watch and use the matching charging cable to charge and activate the device. The watch turns on automatically while charging.

• b. Wear and adjust

1. Put on the watch, leaving a finger gap between the watch and the wrist bone, and adjust the strap to a comfortable length.  

Note: too loose or too tight wearing may affect the accuracy of HR or Sp02 measurement.

2. Change the shoulder strap (use the button to loosen the shoulder strap, then remove the shoulder strap)  

Features

Call connection

Heart rate monitoring

Measure your heart rate or get daily monitoring data at any time of day. You can set the measurement frequency in the app. During the heart rate measurement. the sensor needs to be close to the skin, so that the accuracy of the test data cannot be affected by the incorrect wearing method, and you should keep your arm and wrist still to obtain accurate data.

Blood oxygen saturation (Sp02)

It is one of the important vital signs reflecting the oxygen supply of the body.You should keep your arm and wrist still while measuring Sp02 to get accurate blood oxygen data. Displays the last test result when the test is started but no test result is available.

Sleep

Wearing the watch correctly to fall asleep will generate more accurate sleep data; automatic sleep monitoring will generate sleep/light sleep/wake time throughout the night to analyze your sleep quality:

Breathing Instructions

Go to Breathing Instructions and choose your desired duration. Click to start – then follow the vibration frequency and animation instructions to adjust your breathing. release stress at the right time and regulate your mood.

Sports data

View your recent sports information on your watch, Include details about your sport You can also see the data on your phone’s app.

Sports modes

Contains 18 sports modes. you can enter various sports modes through the watch side – such as running/walking. etc.

Built-in stopwatch and timer.

Alarm clock

Customize your alarm settings according to your daily. weekly or daily custom requirements. You can also set the sleep delay time according to your needs.

Weather forecast

Supports up to three days of weather information. You can view today’s ‘current weather, maximum and minimum weather values’, and the synchroni- zation also provides the weather conditions for the next two days.

Music Control

After the watch is connected to the mobile APP, you can control the music player to play “Previous/Next”, ‘Play/Pause” and ‘Volume Up/Down”.

Message reminder

Rest reminders

This product supports a variety of reminder modes, including heart rate peak, walking. drinking water reminder. women’s health and other functions.

Settings

This product setting allows you to customize the settings for the flexibility of the watch according to your requirements.

Find your phone

After the watch is connected to the mobile APP, you can make the phone ring through the watch. Click the icon again to stop the ringing.

• Charging temperature range: 10°C-45°C
• Battery Life: Actual battery life and charging times will vary depends on usage and environ-ment, etc.
• Waterproof: Not suitable for diving, sea swimming or sauna. But suitable for swimming in pool or shower (cold water) and shallow.

Cleaning and maintenance

It is recommended to wear and maintain according to the following requirements:

1. Keep the product clean;
2. Keep the product dry;
3. Do not wear too tight.
   • Do not use household cleaners to clean the watch, but use soap-free cleaners.
   • It is recommended to use alcohol scrubbing for difficult-to-remove stains.

Frequently Asked Questions

1. Failed to search watch on mobile APP?
   

2. It is recommended to update InxFit to the latest version.

3. It is recommended to close the InxFit program, restart the Bluetooth, and then connect.

4. Confirm that the mobile phone system supports Android 6.0 or 10S 9.0 or above

5. The watch does not receive any reminders, text messages or calls?

6. You need to turn on the smart reminder function and cal reminder switch in InxFit and synchronize with the watch.

7. The iPhone needs to be paired with the watch via bluetooth.

8. You need to connect the watch to bluetooth

9. Bluetooth often disconnects?

10. If the distance between the watch and the mobile phone is too far, the Bluetooth connection effect of more than 7m will be significantly weakened.

11. Whether the Bluetooth function of the mobile phone is abnormal.

Safety and Product Information Notes

Battery warning
Do not disassemble, bore or damage the batery. Do not disasemble the built-in bateries of non-replace-able battery devices. Do not use sharp objects to remove the battery. Health Warning if you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitoring strap. The watch’s optical heart rate sensor glows green and flashes. If you sufer from epilepsy or are sensitive to blinking light sources, please consult your physician if you can wear this product. The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities, such as steps. sleep, distance, heart rate and calories, but may not be completely accurate. The device, accessories, heart rate sensors and other relevant data are designed for entertainment and fitness, not for medical purposes. They are not applicable to the diagnosis, monitoring. treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. we are not responsible for any consequences caused by any data deviation.

Cycling Warning
Please maintain good judgment at 24. all time and ride in a safe manner. Make sure your bike and hardware are properly maintained, and all components are properly installed.

Matters need Attention
‘Watch data needs to be kept once every 7 days to avoid data loss. ‘The watch has no waterproof effect on seawater.acidic and alkaline solutions, chemical reagents and other corrosive liquid. The damage or defects caused by misuse or improper use are not covered by the warranty. ‘Sports mode supports up to 6 hours of exercise at a time. ‘Avoid wearing the watch too tight in daily use. Please keep the parts of the watch touching the skin dry. ‘When your heart rate is measured, keep your arm still during the test.

The device meets the EU ROHS criterion. Please refer to IEC 62321. EU ROHS Directive 2011/65/EU and revised RoHS directive.

If you experience discomfort or skin iritation when wearing your smart watch,then we recommend you try cleaning your device. Sometimes residue or foreign materials build up around your device and may aggravate your skin. It’s also possbile that you are not wearing the watch correctly. We recommend making sure to clean and adjust your watch regularly for a more comfortable fit.

Caution:

• if you experience skin iritation when wearing your watch, please refrain from wearing, and wait two to three days to see if your symptoms ease. If symptoms persist or worsen, please consult a physician.
• if you have eczema, allergies or asthma, you may be more likely to experience a skin iritation or allergy from a wearable device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the folowing two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received,including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installtion. This equipment generates, uses and can radiate radio frequency energy and, if not instated and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined turning the equipment of and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECTTYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Old electrical appliances must not be disposed of together with the residual waste,but have to be disposed separately.The disposal at the communal collecting point via private persons is for fee.The owner of old appliances is responsible to bring the appliances to these collecting points or to slimier collection points. With this little personal effort,you contribute to recycle valuable raw materials and the treatment of toxic substances.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>