SMART WATCHES JW11 Kids Phone Watch Instructions
- June 5, 2024
- Smart Watches
Table of Contents
SMART WATCHES JW11 Kids Phone Watch
Note: The function of this product could be subject to change. For the functional modification that will not affect the use of this product, this manual will not be revised. Thank you for your understanding.
Get Started
Power On/Off
Power On: Press and hold the power button
Shutdown: Press and hold the power button
- Before switching on the watch, make sure that the battery is properly installed in the device.
- If the device fails to turn on, this could be caused by low battery. Please check the battery if correctly installed and recharge the device for at least 20 minutes.
Charging
Remove the silicone plug on the USB charging port, and then connect the Micro-
USB end of the cable to the watch and the other end to the USB charger.
- After the charger is plugged to the power socket, the power icon at the top right of the screen will start scrolling, indicating that it is in charging mode. The power icon will stop scrolling with a full battery icon when fully charged.
Installed a SIM card
Remove the rear cover and battery of the watch first. Then follow the
direction of the symbol and insert the Micro-SIM card into the slot. Finally,
install the battery and back cover in sequence.
- The SIM card must support 2GGSM, otherwise, the function of communication will not be available!
- This phone watch doesn’t support LBS and GPS tracking function, it doesn’t need to download APP
Functions
The Screen display in standby mode
Contacts Slide to the left or right in the standby interface to enter the
main menu, select contacts and click to enter, you can select Dad, Mother or
others, click SET NUMBER, enter the number input interface, enter the
corresponding phone number, click Save, then record in the phone book. Click
the avatar on the interface to call out the corresponding call. Note:
maximum 10 contacts can be stored
Quick Dial
In the main menu, select
Camera
In the main menu, select Camera and click to enter, you can enter the preview
interface, click the left button to take the photo, and click right button to
return. The default storage is in
Album
In the main menu, select
Record
In the main menu, select
Note : A memory card needs to be inserted.
Alarm
In the main menu, select
Calculator
In the main menu, select the
Game
Seven games are installed in the watch.
-
2048
2048 is a popular digital game.
How to play: Swipe up, down, left or right to move the tiles across the board. The tiles will slide in the swipe direction; meanwhile, a new tile will emerge randomly in the board. When the tiles with the same number meet, they will merge into one tile. -
Basketball Shoot master
How to play: Press the basketball to shoot, When the backboard is going to move to the middle, control to shot.
-
Bee War
Protect your planet from enemy attacks. Destroy them all before they reach your base.
How to play: Click on the screen to move the fighter to shoot, you need to hit twice to destroy the enemy, score as much as possible! You have three chances.
You can set the “Easy”, “Normal” and “Hard” modes to turn music on or off and view scores. -
Pinball Hit Bricks
How to play: Destroy all bricks to progress to the next level White bricks give a special 3-ball bonus. Blue bricks need to be hit 2 times. Score as many points as you can!
You can set the “Easy”, “Normal” and “Hard” modes to turn music on or off and view scores. -
Car Grab GoodS
How to play: Click on the screen to move the car and catch as many airdrops as possible. You have three chances.
You can set the “Easy”, “Normal” and “Hard” modes to turn music on or off and view scores. -
Mario eat gold
How to play: You need to collect as many coins as possible and jump over platforms, Don’t fall or
hit the columns, or you’ll die! Press once to jump, press twice for a big jump.
You can set the “Easy”, “Normal” and “Hard” modes to turn music on or off and view scores. -
Ultimate racing
How to play: Press and hold the car to move around to switch lanes. The car in front may drop gold coins and eat as much gold coins as possible. To avoid a crash, you only have one chance. You can turn music on or off and view scores.
Set up
The following items can be set in the settings
-
Language
Different languages can be set. -
Time And Date
You can set the time and date of your watch. -
Call log
You can view the watch’s call history. -
File manager
You can go to File Management to view the files in your watch. -
Silent Profile
The watch will be in silent mode when turned on. -
Version Info Summary
The software version number can be queried. -
Restore settings
The factory settings can be restored
Music
- Copy songs via USB connection must be in a power-off state
- Only the music files in “My music” folder can be played.
Hardware Specifications
No. | Item | Parameter/Model |
---|---|---|
1 | CPU model | MT6261 |
2 | Communication system | GSM |
3 | Frequency band | 850MHz/900MHz/1800MHz/1900MHz |
Quad Band
4| Screen| 1.54 inch; IPS HD colored touch screen
5| Resolution| 240240
6| Camera| 300,000 pixels
7| Battery| 480mAh lithium polymer battery
8| Internal memory| 32MB
9| Cover material| Plastic (ABS+PC)
10| Strap material| Dow Corning food grade silicone
11| Watch size| 52.4mm40.7mm*13.8mm
12| Watch weight| 43g
13| Optional languages| English (default), French, Spanish, German
Package Contents
No. | Item | Quantity |
---|---|---|
1 | Cell Phone Watch (with battery) | 1 |
2 | USB cable | 1 |
3 | Instruction Manual | 1 |
- Please check the contents in the checklist carefully. If any of them is missing, please contact the seller in time. Thank you for choosing our product!
5 FAQ
Q: Is this watch waterproof? Can I immerse it in water?
A: This watch has an IPX5 water resistant rating, which can withstand water
coming from a jet, but you cannot immerse it in water.
Q: What type of SIM card is suitable for this watch?
A: The watch only supports the SIM card with 2G GSM communication standards.
To make a phone call, the voice call service of the SIM card must be enabled.
Please contact local communication operator for details.
Q: Does the watch emit strong radiation? Will it cause harm to health?
A: The watch has been tested by an authoritative third-party testing agency.
The radiation is minimal, which is almost 0 and far lower than the
international standard. It will not cause any harm to the human body. No need
to worry about this issue and enjoy it!
Q: Can I use the watch without a SIM card?
A: If the watch does not have a SIM card, the communication-related functions
will be disabled, such as call and SMS.
Q: What are the requirements for the charger?
A: Please use a standard USB charger for the watch. It is recommended to use a
mobile phone charger and avoid charging the device through the USB port of a
computer.
Q: How long does it take to fully charge the watch?
A: It might take about 2 hours to charge the watch. There is a power icon on
the watch that indicates the current power. When the power is low, please
charge it immediately.
Q: Will it have any negative impact if the watch hasn’t been used for a long
time?
A: The power of the battery will drain completely if watch will not be used
for a long time. Before using it again, charge the device for 20 minutes
first.
Q: How safe is the battery? Will it explode or cause a fire?
A: The watch adopts lithium polymer battery, which will not cause any safety
issues such as overheating, explosion or fire. Moreover, the stress-tolerant
structure will ensure the safety of the battery!
Q: Is there any privacy leakage risk such as leaking personal information or
location when using the watch?
A: This children’s cell phone watch is different from other watches with the
positioning function. It is not controlled by any APP, nor can it be connected
to the Internet; therefore it is impossible to be hacked, which will ensure
the safety of your personal data.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifi cations to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Specific Absorption Rate (SAR) information:
This Kids smart watch meets the government’s requirements for exposure to
radio waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluations
of scientific studies.
The standards include a substantial safety margin designed to assure the
safety of all persons regardless of age or health. FCC RF Exposure Information
and Statement the SAR limit of the USA (FCC) is 1.6 W/kg averaged over one
gram of tissue. Device types: Kids smartwatch has also been tested against
this SAR limit. This device was tested for 0 mm for body-worn and 10mm for
face-up position respectively between the unit and the body of the user. To
maintain compliance with FCC RF exposure requirements, use accessories that
maintain 0 mm for body-worn and 10mm for face-up position respectively between
the user’s body and the back of the Kids smartwatch. The use of belt clips,
holsters and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements and should be avoided.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>