BORMANN BBQ1050 Lower Grill User Manual

June 4, 2024
BORMANN

BBQ1050 Lower Grill
User ManualBORMANN BBQ1050 Lower Grill

Description

Surfaces
Ripple surface: It can be used for frying beef burgers, sliced meat, meat roll, vegetables, etc.
Smooth surface: it can be used for frying cheesecake, dumplings, and all kinds of pie, rice cake, and sweet potato. It can also be used as a plate for heating beverages and cooking coffee.

Lower Grill

You can fill a small baking dish with food, then put the lower grill clown to cook the food in succession or keep the food warm. You can also thaw frozen meat or softened cheese on it.

Handle
While removing the frame, please hold the Bakelite handle and be careful not to touch the heated metal piece to avoid scalding.

Small baking
For filling food to heat on the iron plate grill or keep food warm on the lower grill. Soup, cheese, or bread stuff can be also grilled on its lower grill.

Points for Attention

  1. Make sure the voltage supply is the same as the voltage marked on the product.

  2. Clear the barbecue grill and its accessories before being used for the first.

  3. When it is switched for the first time, the grill may emit a new smell. A small amount of smoke may also be noticeable. We, therefore, recommend you heat up the barbecue grill for about 5 minutes without any foodstuff.

  4. Connect the barbecue grill to the main supply socket and turn the thermostat knob or the highest setting (MAX), and the pilot light will come on. When grilling
    delicate food or for warming food, you can turn the thermostat back to a lower position and/or adjust the grill but rotor middle or upper position.

  5. It begins to work when the indicator light turns on. Please be cautious about safety.

  6. Before cleaning your barbecue grill, always make sure that the plug has been removed from the backing dish and the lower grill:
    • Please do not clean it with a metal edge tool, abrasive medium, or corrosive detergent.
    • Please do not cut food on the baking dish.
    • The baking dishes should not hit each other while removing or cleaning them.

  7. Never immerse the product in water.

  8. The supply cord should not touch the grill when in use.

  9. This product should be inserted into the socket with ground wire.

  10. Keep children away from being inserted into the socket while it is on.

  11. When using a baking dish with a smooth surface as a heated plate, please pay attention to reducing the attrition between the container and the smooth sur-face to avoid damaging its surface processing layer.

Warnings

  • Always switch off and disconnect the barbecue grill from the main supply socket when it is not in use.
  • Please make sure that the appliance stands stable and safe and is always supervised while in use.
  • Make sure that no inflammable Materials are adjacent to the grill.
  • Always empty the appliance and allow it to cool before you store it.
  • Contact the nearest authorized service center because special tools are required for its repair. Never attempt to repair the barbecue grill yourself.
  • In case the barbecue grill is operated in any manner other than described in these instructions. For use, liability will be undertaken for possible damage.

Technical Data

Voltage/Frequency: 220-240V 50/60HZ
Power: 2000W
Construction material: 0.4mm iron
Net Weight: 2.6Kg
Cable and plug type: VDE plug with 3G*0.75MM² – 0.9m
Product Size: 48.5x30x9cm

  • The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes signif- icantly affect the performance and safety of the products. The parts described/illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
  • Please note that our equipment has not been designed for use in commercial, trade, or industrial applications. Our warranty will be voided if the machine is used in commercial, trade, or industrial businesses or for equivalent purposes.
  • To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair, or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.

WWW.BORMANNTOOLS.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals