VEVOR VV-GYQXJ-1.76D Electric Pressure Washer Instruction Manual

VEVOR VV-GYQXJ-1.76D Electric Pressure Washer

• Empty air before use
• Do not suggest self-priming

This appliance is not intended for use by persons (including children) with reduced physical, sensory, or capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

• The function of the Safety valve: when the pressure of the pump exceeds the Preset valve, returns the excess fluid to the inlet system.
• The function of the pressure switch: When turning off a gun, the pressure switch on the action, cuts off the power supply for protection operations.

PRECAUTIONS

1. Assemble the pressure washer correctly according to the instructions;
2. To avoid mishandling of device, do not bend the water inlet pipe after opening the water valve.
3. Connect the power cord plug into the socket, making sure the leakage protection indicator is on;
4. Remove the nozzle on the spray gun and then turn on the switch of the washer and the spray lance. Ensure that the end of the spray gun continues to discharge water for 5 seconds.
5. After turning off the switch and reinstalling the nozzle, the pressure washer is ready for use.
6. Our electric power washer features a safety automatic total stop system (TSS), which automatically shuts off the pump when the trigger is not engaged.

WARM TIPS FOR STORAGE PURPOSES

1. Turn off the water source and the power source, then open the spray lance to release the internal pressure after every use;
2. In order to prevent the water from freezing, please empty the water inside the washer and store it indoors during winter;

PRODUCT OVERVIEW

1. Spray gun
2. Handle
3. Hose reel
4. Cable hook
5. Soap hook
6. Switch
7. Spray lance
8. Outlet with protection cap
9. Gun hook
10. Cable
11. Inlet with protection cap
12. Cleaning needle
13. 4 Nozzles
14. Inlet filter (attached to the machine)
15. Soap bottle

ASSEMBLY

• ASSEMBLING GUN HOOK
  Press the gun hook (4) to the machine. (See Fig A)

• MOUNTING OF HANDLE
  Press the hose reel (2) to the machine, and fix the two screws. (See Fig B , C)

• ASSEMBLING CABLE HOOK
  Press the cable hook (4) to the machine, and fix the two screws. (See Fig D , E)

• MOUNTING OF INLET WATER FILTER

  • Remove the protection cap(a) of inlet firstly. (See Fig F)
  • Attach the inlet filter(14) to the machine’s inlet. (See Fig G)

• ASSEMBLING HIGH PRESSURE HOSE

  • Insert the adjustable spray lance (7) into spray gun (1), and twist 1/4 turn until rectangular tab appears. Then insert the nozzle(13). (See Fig H)
  • Make sure that ON/OFF switch is in OFF position. (See Fig l)
  • Tighten the high pressure hose into spray gun (1). But do not over tighten. (See Fig J)
  • Remove the protection cap (b) of outlet firstly, than connection the pressure hose to the machine’s outlet (8), make sure it is connected firmly. (See Fig K,L,M)

OPERATION

ON/OFF SAFETY SWITCH

• Connect the plug into a properly out.
• Trigger switch is in a locked off position to prevent in accidental starting. Depress safety lock (d) to “unlocking” position, then trigger switch is now on. (See Fig. N)
• Start the pressure washer by turning ON/OFF switch to ON Press the trigger. (See Fig. O) Reminder: motor does not run continuously, only when trigger is squeezed.
• Before operating the high pressure washer, press the trigger switch to bleed any trapped air out of the pump and hose. (See Fig. P)

SURFACE PREPARATION

Before staring any cleaning task it is important the area for objects which could create a hazard. Remove objects from the work area which could be tripped over, such as toys or outdoor furniture. Ensure that all doors and windows are closed tight.

SURFACE PREPARATION

Adjusting the spray

• The adjustable spray lance allows you to use any variety of spray patterns from a fan spray to a pencil jet spray. When using pressure washer to clean wood decks, siding, vehicles etc., always start using the fan spray and begin spraying from a minimum 36″ away to avoid damaging the surface of the material you are cleaning. (See Fig. Q)

CAUTION: Do not adjust the nozzle while the trigger is squeezed.

NOTE: The four nozzles have different shapes of water, as shown in the figure above.

CAUTION: Jet spray adjustment is very aggressive. Do not adjust while spraying. We recommend that for most cleaning applications a 20-degree spray angle should be used to avoid damage to the surface being sprayed.

Using the soap bottle

• Insert the adjustable the soap bottle (15) into spray gun (1), and twist 1/4 turn until rectangular tab appears. (See Fig. R)

NOTE: Detergent need to be diluted to achieve the most effective cleaning. it is recommended to dilute the dletergent in suitable containerto therequired concentration before using.

WARNING:

• After use, you need to turn off the water, turn off the gun, remove the barrel, and then fire the gun to remove the internal pressure of the product to prevent the product overflow valve from being under pressure for a long time;
• Especially in winter weather, the product needs to be drained and placed indoors to avoid freezing of the water inside the product.

ACCESSORIES

• Spray gun
• Spray lance
• 4 Nozzles
• Gun hook
• Cleaning needle
• 6m High pressure hose
• Cable hook
• Water filter(fitted within inlet)
• 250ml Soap bottle

Use good quality accessories marked with a well-known brand name. Choose the type according to the work you intend to undertake. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock , file and/or serious Injury.

Save all warnings and instructions for future reference.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack Of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

POWER TOOL SAFETY WARNINGS

• WARNING: DO not use the appliance without reading the instruction sheet.
• Safety boots, safety gloves, safety helmets With Visors, hearing protection etc. shall be worn while operating the machine.
• When opening the trigger gun, there is a danger of the kickback force and the sudden torque on the spray assembly. please hold the nozzles tightly.
• WARNING: This machine has been designed for use with the cleaning agent supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety Of the machine.
• WARNING: High pressure jets can be dangerous subject to misuse. The jet must not be directed at persons, live electrical equipment or the machine itself.
• WARNING: Do not use the machine within range of persons unless they wear protective clothing.
• WARNING: Do not direct the jet against yourself or others in order to clean clothes or foot-wear.
• Disconnect from the electrical power supply before carrying Out user maintenance.
• High pressure cleaner should not be taken by children or untrained persons.
• WARNING: Risk of explosion – Do not spray flammable liquids.
• WARNING: To ensure machine safety, use only original spare parts from the manufacturer or approved by the manufacturer.
• WARNING: High pressure hoses, fittings and couplings are important for the safety of the appliance. Use only hoses, fittings and couplings recommended by the manufacturer.
• WARNING: Water that has flown through backflow preventers is considered to be non-potable.
• WARNING: The machine shall be disconnected from its power source by removing the plug from the socket-outlet during leaning or maintenance and when replacing parts or converting the machine to another function.
• WARNING: DO not use machine if a supply cord or important parts of the machine are damaged, e.g. safety devices, high pressure hoses, trigger gun.
• WARNING: If an extension cord is used, the plug and socket must be Of watertight constructions.
• WARNING: Inadequate extension cords can be dangerous.
• The electric supply connection shall be made by a qualified electrician and comply with IEC 60364-1. It is recommended that the electric supply to this machine should include either a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms or a device that will prove the earth circuit.

SYMBOLS

• Warning: DO not direct the jet at persons, animals and electrical equipment.
• Read the manual
• Machine not suitable for connection to the potable
• water mains
• Double insulation
• RCM approval mark

TECHNICAL DATA

• Voltage: 120V/60Hz
• Wattage: 1500W
• Degree Of protection: IPX5
• Rated temperature: 0-400C
• Insulation class:
• N.w.: 7.2kg

Note: Operating water pressure and maximum water pressure are obtained in the experimental test environment, which may be different from the actual use environment.

OPREATING INSTRUCTIONS

NOTE: Before using the tool ,read the instruction book carefully.

CAUTION:

• Never use the pressure washer to draw in water contaminated with solvents (e.g. paint thinners, gasoline, oil, etc.). Dirt in the feed water will damage the unit.
• TO avoid this risk, we recommended checking the water filter (located inside the water inlet; to clean it out see maintenance section).
• Always prevent debris from being drawn into the unit by using a clean water source and an accessory water source and an accessory water filter if required.

Water supply (cold -water only)

1. Do not draw non-water liquids through the unit. For use with cold water supply only.
2. Water hose must be at least a 1/2″ indiameter.
3. Flow rate can be determined by running the water for one minute into an empty container.
4. The water supply temperature must not exceed 40’C (1040F)

TROUBLESHOOTING

Disconnect the machine from the power source before making any repair. TO avoid unnecessary disappointments, you should check the following before contacting the service organization:

Machine refuses to start.

|

Machine not plugged in Defective socket.

Defective extension cable.

|

Plug in machine. Try another socket.

Try without the extension cable.

Fluctuating pressure.

|

Pump sucking air.

Valves dirty, worn out or stuck. Pump seals worn out.

|

Check that hoses and connections are airtight.

Clean and replace or refer to local distributor.

Clean and replace or refer to local distributor.

Machine stops

|

Incorrect mains voltage. Thermal cut-out activated. Nozzle partially blocked.

|

Check that the mains voltage corresponds to specification on the model tag.

Leave the washer for 5 minutes to cool down.

Clean the nozzle.

Machine pulsating

|

Air in inlet hose.

Inadequate supply of mains water. Nozzle partially blocked.

Water filter blocked.

Hose kinked.

|

Pump allow machine to run with open trigger until regular working pressure resumes.

Check that the water supply corresponds to specifications required.

Avoid using long, thin hoses (min.

 |  |

Clean the nozzle.
Clean the filter.
Straighten out hose.

---|---|---

Machine often Starts and stops by itself.

| pump/spray gun is leaking.| Contact your nearest Service.
Machine starts, but no water comes out.

| Pump/hoses or accessory frozen.
No Water supply.
Water filter blocked
Nozzle blocked

|

Wait for pump/hoses or accessory
to thaw.
Connect water supply and turn on.
Clean the filter.
Clean the nozzle.

FREQUENTLY ASKED QUESTIONS

What is the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer?

The VEVOR VV-GYQXJ-1.76D Electric Pressure Washer is a powerful cleaning tool designed to efficiently remove dirt, grime, and stains from various surfaces using high-pressure water. It is commonly used for cleaning tasks around homes, gardens, and outdoor spaces.

How does the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer work?

The VEVOR VV-GYQXJ-1.76D uses a high-pressure water stream to effectively clean surfaces. It typically features adjustable pressure settings and various nozzles to customize the cleaning process for different tasks and surfaces.

Is the VEVOR VV-GYQXJ-1.76D suitable for cleaning different surfaces?

Yes, the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer is versatile and suitable for cleaning various surfaces, including decks, patios, sidewalks, vehicles, and more, depending on the nozzle and pressure settings.

What is the pressure output of the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer?

The pressure output of the VEVOR VV-GYQXJ-1.76D may vary, but it is designed to deliver a high-pressure water stream for effective cleaning. Pressure is often measured in pounds per square inch (PSI).

What is the flow rate of the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer?

The flow rate of the VEVOR VV-GYQXJ-1.76D is the amount of water it delivers per minute and is typically measured in gallons per minute (GPM). It determines how quickly and efficiently the pressure washer can clean surfaces.

Is the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer portable?

The portability of the VEVOR VV-GYQXJ-1.76D may depend on its specific design, but many models are designed to be portable and easy to move around, featuring wheels and a compact design for convenience.

What is the power source of the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer?

The VEVOR VV-GYQXJ-1.76D is an electric pressure washer, meaning it is powered by electricity. It typically requires a standard electrical outlet for operation.

Can the VEVOR VV-GYQXJ-1.76D be used for both residential and commercial cleaning tasks?

Yes, the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer is versatile and can be used for both residential and commercial cleaning tasks, offering a powerful solution for various cleaning needs.

Does the VEVOR VV-GYQXJ-1.76D have adjustable pressure settings?

Yes, the VEVOR VV-GYQXJ-1.76D often features adjustable pressure settings, allowing users to customize the pressure output based on the specific cleaning task and the type of surface being cleaned.

What safety features does the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer have?

The VEVOR VV-GYQXJ-1.76D may include safety features such as a trigger lock to prevent accidental activation, thermal overload protection to prevent overheating, and other safety mechanisms for user protection.

Is the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer easy to assemble?

Yes, the VEVOR VV-GYQXJ-1.76D is typically designed for easy assembly, and it often comes with clear instructions to guide users through the setup process.

Can the VEVOR VV-GYQXJ-1.76D handle hot water for cleaning?

The VEVOR VV-GYQXJ-1.76D is generally designed for use with cold water. Using hot water may damage the pressure washer, and users should follow the manufacturer's guidelines for water temperature.

Is technical support available for the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer?

Many manufacturers offer technical support and customer assistance for the VEVOR VV-GYQXJ-1.76D to address setup, usage, and troubleshooting questions.

What type of nozzles does the VEVOR VV-GYQXJ-1.76D come with?

The VEVOR VV-GYQXJ-1.76D Electric Pressure Washer often comes with a set of interchangeable nozzles, including a variety of spray patterns such as a wide- angle spray for general cleaning and a focused spray for more intense cleaning tasks.

Can the VEVOR VV-GYQXJ-1.76D be used for cleaning vehicles?

Yes, the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer is suitable for cleaning vehicles, including cars, trucks, and other transportation equipment. Users can adjust the pressure settings to avoid damaging vehicle surfaces.

Is the VEVOR VV-GYQXJ-1.76D Electric Pressure Washer designed for long-lasting use?

Yes, the VEVOR VV-GYQXJ-1.76D is typically built to be durable and reliable, ensuring it can provide long-lasting cleaning solutions for various applications.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:VEVOR VV-GYQXJ-1.76D Electric Pressure Washer Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>