GETPRO HD-GP3624-O Oval Frameless LED Wall-Mounted Bathroom Vanity Mirror Installation Guide
- June 3, 2024
- GETPRO
Table of Contents
GETPRO HD-GP3624-O Oval Frameless LED Wall-Mounted Bathroom Vanity Mirror
USE AND MAINTENANCE
The interior is constructed of mirrored glass and aluminum.
Use only a damp cloth to clean. Ammonia or vinegar-based cleansers can damage
mirrors.
When cleaning, spray the cloth, not the mirror, or surrounding surfaces.
Do not use abrasive cleansers on any part of the light fixture.
EXTENTED WARRANTY SERVICE
Please send your Purchasing Order No. to
service@getprohome.com to register extended 2
years warranty on hardware components. We pride ourselves with a 100% Customer
Satisfaction Guarantee. We are confident in our products and stand behind them
100%. Just reach to us with any questions or concerns and we will be happy to
help in less than 24 hours!
IMPORTANT NOTICE
We will guarantee all customer benefit. The products we ship out are brand
new. Please check carefully before installation, compare all parts with the
parts listed in the package contents section. If any part appears missing or
damaged, do not install.
Contact customer service by E-mail:
service@getprohome.com
Send us the pictures or video, we promise will response to you with 24 hours.
We will decide send you spare parts or deliver a replacement by free.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical furnishing, basic precautions should always be followed, including the following:
- WARNING: To reduce the risk of burns, fire, electric shock or injury to persons. Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. Never drop or insert any object into any opening.Do not use outdoors.
- WARNING: Risk of electric shock. Connect this furnishing to a properly grounded circuit only. See grounding instructions.
- CAUTION: Maximum shelf load 34Ibs/15.4kg
ELECTRIC CONNECTIONS
ALL WIRING SHOULD BE DONE BY A QUALIFIED LICENCED ELECTRICIAN.
- WARNING: Shut off power before wiring the cabinet. Requires 120 VAC 20 Amp GFI protected Circuit. GROUNDING INSTRUCTIONS:
- CAUTION: This product must be connected to a grounded metal permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.
- WARNING: An Electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) protected circuit when used in bathrooms and all other locations required by the National Electric Code.
HARDWARE AND TOOLS
-
Level and mark the mirror’s location on the wall. Connect the wire to Junction Box inside the wall.
-
Use the tape measure the height, and draw the horizontal ,line and the vertical line of the wash-basin. Measure the distance of the mirror hole, and mark the hole place on the wall.
-
Drill and insert the Wall Anchor, Drive in the screw cross the bottom support.
-
Align the holes of the mirror with the screws and hang them to complete the installation
GET YOUR HOME A PRO CHOICE
We Delighted That You Chose Our Products
Enjoy Our Product And Have a Nice Day
More Products On
www.getprohome.com
Send Email To
service@getprohome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>