GETPRO HD-CY-G-F7236-S Large Rectangular Frameless Motion Sensor Wall Bathroom Vanity Mirror Installation Guide

GETPRO HD-CY-G-F7236-S Large Rectangular Frameless Motion Sensor Wall

Bathroom Vanity Mirror

IMPORTANT NOTICE

We will guarantee all customer benefits. The products we ship out are brand new. Please check carefully before installation, and compare all parts with the parts listed in the package contents section. If any part appears missing or damaged, do not install it. Contact customer service by E-mail: [email protected] Send us the pictures or video, we promise will respond to you within 24 hours. We will decide to send you spare parts or deliver a replacement by free.

AFTERCARE INSTRUCTIONS

• Clean using a soft dry cloth only when turned off. Never use cleaning agents or abrasive materials.
• Do not allow moisture to come into contact with the lamp.

EXTENDED WARRANTY SERVICE

Please send your Purchasing Order No. to [email protected] to register an extended 2 years warranty on hardware components. We pride ourselves with a 100% Customer Satisfaction Guarantee. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!

WARNING AND SAFETY INSTRUCTIONS

Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.

WARNING Risk of Fire and Electric Shock

• All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
• Switch off the electrical supply at the main circuit board BEFORE installation and mainte­nance.
• Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
• Regularly check the cord, the transformer and all other parts for damage. If any part is dam­aged the product should not be used.

INSTALLATION SAFETY

• Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
• Ensure there are no hidden pipes or cables in the wall before drilling.
• Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.

CAUTION

The light source of this product is non-changeable light diodes (LED). Do not disassemble the product, as the light diodes can cause damage to the eyes.

NOTE:
The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may occur. It must be understood that common sense, caution and care, are factors that can’ t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Do not install this fixture in hazard­ous locations.

TOOLS REQUIRED

HARDWARE LIST

INSTALLATION

• Step 1
  Use the tape to measure the height, and draw the horizontal line and the vertical line of the wash basin.

• Step2
  Measure the distance of the mirror hole, and mark the hole place on the wall.

• Step 3
  Drill and insert the Wall Anchor

• Step 4
  Drive in the screw cross the bottom support.

• Step5
  Align the holes of the mirror with the screws and hang them to complete the installation

• Step6

• Step7
  Long holding to make the light gradually dim Long holding again and the light gradually brightens

• Step 8

  • We provide plug with mirrors.
  • Optional to cut the plug directly and connect to electrical wiring if using wall switch.

www.getprohome.com
E-mail: [email protected]
Hotline:+ 1 5714125962

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>