DUSTBANE Hurricane 900 XTT 28 Inch Industrial Auto Scrubbers User Guide

June 12, 2024
DUSTBANE

DUSTBANE Hurricane 900 XTT 28 Inch Industrial Auto Scrubbers User Guide
DUSTBANE Hurricane 900 XTT 28 Inch Industrial Auto
Scrubbers

This guide is intended for quick consultation only and does not replace the user and maintenance manual. Before using this machine, read the user maintenance manual contained in the machine’s packaging and follow all the instructions.

PREPARATION AND OPERATION

  1. Add water and detergent to solution tank.
    PREPARATION AND OPERATION

  2. Disengage parking brake by pressing on the brake pedal.
    PREPARATION AND OPERATION

  3. Power on.
    PREPARATION AND OPERATION

  4. Select brush pressure setting.’
    PREPARATION AND OPERATION

  5. Toggle switch to change drive direction to forward or reverse.
    PREPARATION AND OPERATION

  6. Press accelerator pedal to activate drive and scrubber
    PREPARATION AND OPERATION

  7. Turn to adjust travel speed.
    PREPARATION AND OPERATION

  8. Press + or – to adjust water level.
    PREPARATION AND OPERATION

DAILY MAINTENANCE

  1. Clean the dirty water tank.
    DAILY MAINTENANCE

  2. Make sure the suction filter and debris filter is clean and undamaged.
    DAILY MAINTENANCE

  3. Make sure detergent outlet filter is clean and free of debris.\
    DAILY MAINTENANCE

  4. Make sure the brushes/drive pad are clean and not worn out. Replace if necessary.
    DAILY MAINTENANCE

  5. Make sure the squeegee is clean and the blades are not worn.
    DAILY MAINTENANCE

TO CHARGE BATTERIES

TO CHARGE BATTERIES

  1. Disconnect battery pack from the machine
  2. Connect battery pack to the charger.
  3. Plug in charger to power outlet.

NOTE: Never stop charge until cycle is complete (Green light).

REPLACING THE SQUEEGEE BLADES

REPLACING THE SQUEEGEE BLADES

  • Unscrew the wing nuts fixing the blade retainer.
  • Remove the blade retainer.
  • Remove the blade.
  • Put the same blade back, reversing the edge in contact with the floor, or replace with a new one.
  • Reposition the blade retainer and fix the wing nuts back.

ATTACHING/REMOVING THE BRUSHES

Attaching:
Press the CLICK ON-OFF button. The machine first performs a release operation, then immediatley afterwards enables the attachment operation. Press the CLICK ON-OFF button again to automatically attach the brushes.

Removing:
Press the CLICK ON-OFF button, the machine releases the brushes

Dustbane Products Ltd., 1000 Last Mile Dr., Ottawa, ON K1G 6Y1
Tel: 1-800-387-8226
Fax: 1-800-363-5309
www.dustbane.ca

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals