ASCONA 050-К Carla Bed with Lifting Mechanism Instruction Manual

ASCONA 050-К Carla Bed with Lifting Mechanism

Specifications:

• Model: 050-, 280- Bed with lifting mechanism
• Dimensions: 14014090 V2
• Weight: 1156 h-120

Product Usage Instructions

Package Contents:
Package No1:

• Backrest
• Lateral sidebar
• Intermediate sidebar
• Intermediate crosspiece
• Glidw self-adhesive
• Furniture angle pieces
• Metal shelf
• Strap
• Washer, Screw, Nut in various sizes

Package No2:

• Linen box bottom
• Bed base
• Lifting mechanism
• Gas shock absorbers
• Mattress holders
• Screws, Bolts, Washers, Nuts in various sizes

Assembly Instructions:

1. Refer to the labeled side bars model on the product.
2. Follow the detailed assembly instructions provided in the manual.
3. Ensure all parts are correctly aligned and securely fastened.
4. Legs variant depends on the bed model; refer to the showroom or website for details.

FAQ:

1. Q: How do I determine the correct legs for my bed model?
   A: The legs variant depends on the specific bed model, which is represented in the showroom or on the website. Refer to the Legs Delivery list for more information.

2. Q: Are the mattress holders interchangeable?
   A: The mattress holders may come in different variants. Ensure to match the correct variant for your specific bed model.

Manufacturer «Litwood» Ltd.
The bed is in full compliance with GOST (Russian National Standart) 19917-2014

Packing list for the bed

Legs variant depends on bed model that is represented as a sample in showroom or on the website
Complete set is shown on the label of Accessories Pack

Packing set for legs

(may be separately packed – for beds Star, Star Grand)

Packing set for legs

Prior to assembly:

1. Check all the parts for any damage before assembling. Any claim for them on assembled article is not accepted by Manufacturer. Package shall be kept until the
   end of assembly process.

2. When revealing any defect or incompleteness in the process of assembling, the package shall be kept until a representative of trading company arrives. Assembly and
   operation Instructions shall be kept during all the period of exploitation.

3. Check the parts and accessories quantity against the list. Manufacturer retains the right to make structural changes into the article, change accessories and metalware for analogous that do not affect design and do not influence on functional properties of the article. If incompleteness or any damage, mark absent part number and inform the store to replace it.

4. Maintain the assembly order given in these instructions! If the Assembly and Operation Instructions are not followed the manufacturer’s warranty obligations are
   removed.

5. To install sofa/armchair-bed/bed a flat floor zone shall be chosen! If the floor are curved may present deviations in the functioning of transformation mechanism of sofa/armchair-bed/bed, distortions of the article form. Any carpet presence is undesirable, because it makes transformation process difficult.

6. Perform the sofa/armchair-bed/bed assembly by two. Move all the parts gently without any jump, place them steady, escape their falls and hits!

7. Move furniture and their parts only slightly lifted. This will allow to exclude any deformation or damage.

For assembling required

The rails complete set depends on the bed size

Only for beds with side completely upholstered with technical fabric and removable cover

If side bar is upholstered with fabric or artificial leather move on it. 16

Only for beds with removable cover

Do not try to fold gas spring prior to being installed on the article. Gas springs folding without any mattress on the frame is prohibited and traumatic. When folding beds for the first time in some cases a light effort is required. Close the frame without fear of damaging shock absorber. If the frame is not closed with two gas springs installed, it may be connected with underweight of bought mattress it is recommended:

1. Remove one of the gas springs lower the bed frame with mattress installed on.
2. Same procedure shall be performed with second gas spring.
3. Install both of gas springs on the lifting mechanism and lower the frame. This will remove difficulties with bed folding.

Complete set and sequence of assembly may be changed depending on lifting mechanism modification. See Base certificate.

To remove gas absorber:

1. Put flat screwdriver under the fixing metal staple;
2. Lift the staple up:
3. Remove the absorber fixing from the stud;
4. Repeat this from the lower part.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>