HOOKE ROAD BXG.3033-S Rugged Front Fender Flares User Manual
- June 15, 2024
- HOOKE ROAD
Table of Contents
MAKE A DIFFERENCE
Front Fender Flares
BXG.3033-S
**Contents:
**
| Qty | Part Name | Size(mm) | Picture |
|---|---|---|---|
| 12 | Button Head Socket Cap Bolts Screws | M8*20 | |
| 12 | Flat Washer | M8201.5 | |
| 12 | Flange Hex Lock Nuts | M8 | |
| 6 | Wire Clips | ||
| 6 | Double-sided tape | ||
| 6 | Wire Clips | ||
| 6 | Cable Zip Ties | ||
| 6 | Wire |
Tools required:
a. Drive Socket Ratchet Wrench;
b. 6mm Hex Bit Socket;
c. 13mm Wrench;
d. Scissors;
e. Electric tape;
Installation time:
About 1.5 hours, 2-3 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.3033-S), please scan the QR code.
https://drive.google.com/drive/folders/1OAGnfbtFYsEgFaK73OaZgssgWYqavuEN?usp=share_link
Installation instruction:
Driver Side Installation:
Step 1 : Remove the factory front fender flares and inner fender liners.
Ready to install our product.
Step 2 : Lift up the front fender flares. Align the mounting holes. Install the front fender flares with the Button Head Socket Cap Bolts Screws (M820), Flat Washer (M820*1.5), Flange Hex Lock Nuts (M8). Tighten up all of those bolts.
Lighting Wiring Installation:
The fender flares light have the functions of the DRL light and the Turnlamp.
Installation: Find the factory fender flares light wiring harness. Connect the
wiring harness as follows.
Negative Electrode (Black Wire) – Factory Black Wire DRL Wire (Red Wire)-
Factory White Green Wire Turn Lamp (Yellow Wire)-Factory White Yellow Wire
Notes: Different models may have different wiring harness colors, but the
above wiring methods are the same.
If your fender flares light can be used normally, this drive isn’t 100%
necessary.
Installation: In series with Turn Lamp (Yellow Wire).
Step 3 : Fix the connected harness with our accessories (Wire Clips, Double-sided tape,Cable Zip Ties).
| Q | Part Name | Size(mm) | Picture |
|---|---|---|---|
| 6 | Wire Clips | ||
| 6 | Double-sided tape | ||
| 6 | Wire Clips | ||
| 6 | Cable Zip Ties | ||
| 6 | Wire |
Step 4 : Repeat the above installation steps in the passenger side.
Step 5 : Recover the factory or modified inner fender liners.
Step 6 : The installation is complete. We hope you enjoy a wonderful off-
road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Hooke Road to find your parts
@ Hooke Road4×4
Post Your Jeep/Truck
w/Hashtag #hookeroad to Win Discount Every Week