KLARSTEIN 10032978 Retro Fridge Instruction Manual

KLARSTEIN 10032978 Retro Fridge

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

TECHNICAL DATA

SAFETY INSTRUCTIONS

• Check that the voltage of the power supply in your home is the same as the voltage shown on the rating label of this product.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Keep ventilation opening, in the appliance enclosure or in the built-in structure, clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• It is recommended to check regularly the supply cord for any sign of possible deterioration, and the appliance should not be used if the cable is damaged.
• To avoid injury or death from electrical shock, do not operate the appliance with wet hands, while standing on a wet surface.
• It is not recommended to use this refrigerator with an extension cord or power board. Please ensure that the appliance is plugged directly into the electrical outlet.
• When positioning the appliance, ensure that there is at least a 5 cm clearance at the sides and a 10 cm clearance at the back as this is the main outlet for heat. This will allow for adequate ventilation.
• Do not place hot food or drink into the refrigerator before it cools down to room temperature.
• Close the door immediately after putting in any items so the inside temperature will not rise dramatically.
• Keep the appliance away from any heat source or direct sunlight.
• To fix stably, the appliance must be placed on a flat and solid surface. It should not be laid on any soft material.
• Do not place any other appliance on top of the refrigerator, and do not wet it.
• Do not store something like ether, methanol, or gasoline, which is easy to evaporate burn or explode.
• Do not use outdoors or in wet conditions.
• Never pull the cord to disconnect it from the outlet. Grasp the plug and pull it from the outlet.
• Keep the cord away from heated surfaces.
• This appliance has been incorporated with a grounded plug. Please ensure the wall outlet in your house is well earthed.
• Connect your refrigerator to an independent electrical socket and use a safe ground wire.
• Defrost the freezer at least once a month because too much frost may affect refrigeration.
• Turn on electricity only 5 minutes later after the electricity goes off. Otherwise, the compressor may be damaged.

This appliance contains the coolant isobutane (R600a), a natural gas that is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this coolant has, however, led to a slight increase in the noise level of the appliance. In addition to the noise of the compressor, you might be able to hear the coolant flowing around the system. This is unavoidable and does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and setting up of the appliance so that no parts of the cooling system are damaged. Leaking coolant can damage the eyes.

Special Notes

• Children between the ages of 3 and 8 are allowed to load and unload refrigerators.
• When positioning the unit, make sure that the power cord is not pinched or damaged.
• Make sure that there are no multiple sockets or power supplies on the back of the unit.

To avoid contamination of food, please follow the instructions below:

• A prolonged opening of the door can lead to a significant rise in temperature in the compartments of the appliance.
• Regularly clean surfaces that may come into contact with food. Clean the water drain regularly.
• Store raw meat and fi sh in suitable containers in the refrigerator so that meat and fish do not come into contact with or drip on other foods.

Notes on the freezer compartments

• Two-star freezer compartments are suitable for storing pre-frozen foods, storing or making ice cream and making ice cubes.
• One-, two- and three-star freezer compartments are not suitable for freezing fresh food.
• If the refrigerator remains empty for an extended period, turn it off, defrost it, clean it, dry it and leave the door open to prevent mould from forming in the appliance.

WARNING
When using, servicing and disposing of the unit, pay attention to the left symbol on the rear of the unit or on the compressor. This symbol warns of possible fires. There are flammable substances in the refrigerant lines and in the compressor. Keep the appliance away from sources of fi re during use, maintenance and disposal.

DEVICE DESCRIPTION

1. Top cover
2. Thermostat
3. Glass Shelf
4. Glass shelf cover of crisper
5. Crystal crisper
6. Fixed feet
7. Short Rack
8. Bottle balcony

TRANSPORTATION AND PLACEMENT

Transporting the device

• Transport the fridge in an upright position and not lying down.
• Allow the unit to stand for 30 Minutes after transportation before switching the unit on.
• When moving the fridge, take care not to place your hand on the door, the top part of the fridge or the pump.

Placing the device

• Place the unit on a secure and level surface, in a well ventilated area, away from a heat source, and avoid direct sunlight.
• Do not place near a water source or an area of high humidity to prevent rust or lessen isolation.

CAUTION: Trip hazard
To prevent accidents the wiring should not be covered by the refrigerator or other objects.

OPERATION

Preparation

1. Remove all the packaging including the base foam and all the adhesive tape.
2. Count all the spare parts and materials supplied with the refrigerator.
3. Place the refrigerator correctly in the right place.
4. Clean it before using and allow the unit to stand for at least 30 minutes without power. After this period has passed, you may switch the unit on.

Switch the unit on

1. Turn the Thermostat button between “0” and “6”.
2. Close the door, allow a few minutes then touch the right and left side of the refrigerator, which will be warm to the touch.
3. After 30 minutes the refrigerator would have cooled, indicating that the compressor system is working correctly.
4. Please readjust the thermostat to set the desired temperature.

Thermostat

• The temperature in the refrigerator is controlled by the Thermostat. “0” switches the unit off and “6” is the coldest setting. In some special conditions (hot weather) it is advisable to keep the unit running on a higher setting.

Food storage in the unit

• Please cover all food to avoid odour transfer.
• Allow sufficient space in the unit between foodstuffs in order to assist with improved cold air flow.
• Hot food needs to cool to room temperature before placing in the refrigerator.
• Avoid opening the door unnecessarily – this will keep the cool air inside and reduce the workload of the compressor.
• Please ensure all fruits and vegetables are cleaned before placing in the refrigerator.
• Door storage is designed for lighter items and cold drinks in cans. Please place heavier items on the shelves inside the refrigerator.

Note: It’s better to allow the refrigerator to run for longer periods than switching the unit on and off, even if there is no food in unit. This will extend the life of the unit.

MAINTENANCE AND CLEANING

Defrost

• If there is frost build up on the evaporator plate, the unit needs to be defrosted. When you defrost, please remove all the food and turn the thermostat to defrost, and open the door.

Note: If you want to speed up the defrost rate, place a bowl of hot water on the rack and close the door. Please don’t use any solid or sharp object or electric heater to defrost as this will damage the evaporator.

Replacing the bulb

1. Should the light fail, switch off at the socket outlet and pull out the mains plug.
2. Then ensure the bulb is screwed securely in the bulb holder. Replace the plug and switch on.
3. If the light still fails, obtain a replacement E14 screw-cap type 240V/10 Walt (Max) bulb from your local electrical store and then fit it.
4. Carefully dispose of the burnt-out light bulb immediately.

Cleaning

• The inside of the refrigerator needs to be cleaned in order to avoid unpleasant occurs.
• First, switch the unit off.
• Use a soft wet towel to wipe down the interior and dry with a cloth wiping away any marks.

Note: Avoid pouring water on the outside of the refrigerator as this will affect the in-sulation of the machine. Don’t use hot water, acid, alkali, gasoline, benzene, caustic cleanser, alcohol and hard brush to wipe the plastic parts.

Storage after use

• If really want to stop using the refrigerator for a long period of time, please switch the unit off and follow the above information to clean and dry the unit. Thereafter keep it in the dry and clean place. Remember to leave the door slightly open to prevent the door seal form sticking to the cabinet.

TROUBLESHOOTING

that the mains plug is plugged into the socket.
The Compressor is not working.| The thermostat is set too high.| Turn the thermostat to a warmer setting.

Unit is running yet not getting cold.

| The unit is overloaded

affecting the cold air flow.

| Please look at the safety instructions section.
Hot food has been placed in the refrigerator.| Please look at the operation section.
The door has not been closed properly.| Close the door.
The door has been opened and closed too many times in a short period.| Keep the door closed.
The refrigerator is near the heater.| Do not place the unit near a heat source. Pleace look at the transport and placement section.
The thermostat position is too low.| Turn the thermostat to a colder setting.
The door can’t be closed.| The surrounding temperature is too high or the unit is in direct sunlight.| Place the unit in another area, not near a heat source and outside direct sunlight as written in the transport and placement section.

The food in the cabinet is frozen.

| The thermostat position is too high.| Turn the thermostat to a warmer setting.
---|---|---
The easily frozen food is placed too near to the evaporator.| Move the food away from the evaporator.

Excessive noise

| The base of the refrigerator has not been removed.| Remove the base of the refrigerator.
The unit has not been aligned evenly.| Place the unit on a level surface.
The back of the unit is touching the wall.| Make sure that the device is free standing. Move the appliance slightly.

Electrical impulses or shock when you touch the unit.

| The unit is not earthed.| Check that the unit is earthed.
The unit is earthed.| Please switch off the unit immediately and call the costumer service.

Normal operating

• The sound of running water indicates that the compressor is working correctly.
• A bang sound indicates a sudden change in temperature. This is a normal change in the stresses of the materials used in the manufacture of the refrigerator.
• The Compressor heats up when underworked – the highest temperature is 90°C. When the left and right side of the refrigerator heats up and when underworked, the two sides can reach an average of 55°C. The outer panels of the refrigerator shows condensation as a result of excessive humidity in the air – please dry it off.

Please check the following prior to requesting a call for service.

Note: Following this basic trouble shooing guides and your refrigerator is still not working, please contact the costumer service.

PRODUCT DATA SHEET

Information according to Regulation (EU) No. 2019/2016

Supplier’s name or trademark: Klarstein

Supplier’s address: Wallstraße 16, 10179 Berlin, DE
Model identifier: 10032979A
Type of refrigerating appliance:
Low-noise appliance:| No| Design type:| freestanding
Wine storage appliance:| No| Other refrigerating appliance:| Yes
General product parameters:
Parameter| Value| Parameter| Value

Overall dimensions (mm)

| Height| 1 435|

Total volume (dm³ or L)

|

240

Width| 545
Depth| 585
EEI| 125| Energy efficiency class| F
Airborne acoustical noise emissions (dB(A) re 1 pW)|

41

| Airborne acoustical noise emission class|

C

Annual energy consumption (kWh/a)|

129,0

|

Climate class:

| temperate, subtropical
Minimum ambient temperature (°C), for which the refrigerating appliance is suitable|

16

| Maximum ambient temperature (ºC), for which the refrigerating appliance is suitable|

38

Winter setting| No|
Compartment Parameters:

Compartment type

| Compartment parameters and values

Compartment volume

(dm³ or L)

| Recommended temperature setting for optimised food storage (ºC) These settings shall not contradict

the storage conditions set out in Annex IV, Table 3

|

Freezing capacity (kg/24h)

|

Defrosting type (auto- defrost=A, manual defrost=M)

Pantry| No| –| –| –| –
Wine storage| No| –| –| –| –
Cellar| No| –| –| –| –
Fresh food| Yes| 240,0| 4| –| M
Chill| No| –| –| –| –
0-star or icemaking| No| –| –| –| –
1-star| No| –| –| –| –
2-star| No| –| –| –| –
3-star| No| –| –| –| –
4-star| No| –| –| –| –
2-star section| No| –| –| –| –
Variable temperature compartment|

–

|

–

|

–

|

–

|

–

For 4-star compartments
Fast freeze facility| No
Light source parameters:
Type of light source| –
Energy efficiency class| –
Minimum duration of the guarantee offered by the manufacturer: 24 months
Additional information:
Weblink to the manufacturer‘s website, where the information in point4(a) Annex of Commission Regulation (EU) 2019/2019 is found: www.klarstein.co.uk

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited Unit 6 Riverside Business Centre Brighton Road Shoreham- by-Sea BN43 6RE United Kingdom

References

• Klarstein | Discover the Online Shop for Home & Living
• Klarstein | Your home. Your kitchen. Your style.
• Klarstein | Der Online Shop für Haushaltsgeräte und Home & Living
• Tienda de Electrodomésticos Online | Artículos para el Hogar | Klarstein
• Klarstein | Boutique en ligne d'électroménager à prix imbattable
• Klarstein Elettromestici - Miglior Qualità Prezzo garantita

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>