Getpro 28 in. W x 28 in. H Round Aluminum Framed Dimmable Wall Bathroom Vanity Mirror in Matte Black Installation Guide
- June 5, 2024
- GETPRO
Table of Contents
Getpro 28 in. W x 28 in. H Round Aluminum Framed Dimmable Wall Bathroom
Vanity Mirror in Matte Black
IMPORTANT NOTICE
We will guarantee all customer benefit. The products we ship out are brand
new. Please check carefully before installation, compare all parts with the
parts listed in the package contents section. If any part appears missing or
damaged, do not install.
Contact customer service by E-mail:
service@getprohome.com
Send us the pictures or video, we promise will response to you with 24 hours.
We will decide send you spare parts or deliver a replacement by free.
AFTER CARE INSTRUCTIONS
Clean using a soft dry cloth only when turned off. Never use cleaning agents or abrasive materials. Do not allow moisture to come into contact with lamp.
EXTENTED WARRANTY SERVICE
Please send your Purchasing Order No. to service@getprohome.com to register extended 2 years warranty on hardware components. We pride ourselves with a 100% Customer Satisfaction Guarantee. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage. If any part is damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION: The light source of this product is non-changeable light diodes
(LED). Do not disassemble the product, as the light diodes can cause damage to
the eyes.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care, are factors
that can’ t be built into any product. These factors must be supplied by the
person(s) caring for and operating the fixture. Do not install this fixture in
hazardous locations.
TOOLS REQUIED
Step 1
Use the tape measure to survey the high, and draw the horizontal line and the
vertical line of the wash-basin.
Step2
Measure the distance of the holes, and mark the holes’ place
Step 3
Drill and insert the Wall Anchor 
Step4
Align the holes of the accessorie with the screws and hang them to complete
the installation
Step5
Hang the mirror with the pendant, measure the position of the holes with the
tape measure
Step 6
Use the tape measure the height, and draw the horizontal line and the vertical
line of the wash-basin.
Step 7
Drill and insert the Wall Anchor
Step 8
Drive in the screw cross the bottom support.
Step 9
Fix the holes on the back of the mirror with the matching screws and hook them
to complete the installation
Step 10
- We provide plug with mirrors.
- Optional to cut the plug directly and connect to e lectrical wiring if using wall switch.
After power on, the button shows blue and it is in waiting state
Long holding to make the light gradually dims Long holding again and the light
gradually brightens
After power on, the button shows blue and it is in waiting state
lick to turn on the defogging function and the button turn to white Click
again to turn off the defogging function and the button turn to blue
We Delighted That You Chose Our Products Enjoy Our Product And Have a Nice Day
More Products On
www.getprohome.com
Send Email To
service@getprohome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>