MELODY SUSIE M Series Kanon Rechargeable Nail Drill Instruction Manual

MELODY SUSIE M Series Kanon Rechargeable Nail Drill Instruction Manual

Thank you for choosing MelodySusie! Please read this user guide carefully and keep itin an accessible location so you may refer to it later.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE USING.

To reduce the risk of burns, electrocution, ire or injury to persons.

Please be sure to read the safety instruction as follow to avoid potential hazards that could result in personal injuries or damage to the device.

Check before Using

1. Check the power supply cord before the first time use and during the lite of the device. Do not use the device fit has a damaged cord or plug, orif itis not working properly.
2. Do not plug the device into a voltage system that is not specified on the device or charger. Use with improper voltage will damage the device and VOID warranty.
3. Use theoriginal charger only.
4. ‘The handpiece of this nail drill is not compatible with other models of nail drill machine from MelodySusie and other brands. Please don’t ‘connect the handpiece with a different nail drill machine.

Note for Battery

1. The Battery needs to be charged fully before first use to ensure optimal performance.
2. Do not overcharge the device or use it when it is charging. Charge the device in well-ventilated condition with 0C ~40 & c.
3. Do not charge the device close to flammable or explosive materials. When charging the device, please do not cover it with clothes or other things.
4. If the device is not used for long periods of time, you should charge and discharge once every three months. In normal conditions, the battery performance will decline over several years.

Note for Using

1. To prevent electric leakage and shock or fire, do not draw out the ‘connecting wires during use or touch the plug with the wet hand. Turn the power off after use.
2. Donotuse the crooked or damaged nail drill bit or replace the bit when power s on.
3. Donotadjust the speed abruptly, stop use once the unusual movement and noise happens.
4. Misuse, dropping or excessive force may cause device damage.
5. Minor should not use this device without parental consent and supervision.

Maintenance Work

1. Donot disassemble the device. Doing so could be dangerous and constitutes voiding warranty conditions.
2. Do not keep the device in ametal box, car, or other places at high temperature(more than 50°C). Keep the handpiece dry and away from oilandgrease.
3. Do not store the device na hot or humid environment. Store tina cool and dry place.
4. Keep the electrical cord away from heated surfaces.
5. Do not dispose of the device in heat or fire.
6. Do not clean the device with harmful chemicals o detergents.

Note for Injury

1. Having manicures done frequently can cause injuries to the nails as well
2. It you need to remove the gel polish of natural nails, try to use the nail polish remover pads to avoid damage to the nail bed with improper operation.
3. Do not use the device if you have an open wound on your nail or hand.
4. If you have any skin diseases, heat-sensitive, allergic reactions, onychomycosis, or any other disorder, you should consult your doctor ‘and medical professionals before using the device.

‘The operator shall be responsible for any consequences including product damage or accidents if not strictly complies with the instructions. If your quire any technical support, please contact us.

SAVE THE INSTRUCTION MANUAL

Six Drill Bits

• Needie Head
  Polish nail edge

• Cone
  Under nails cuticles sidewalls

• Mandrel+Sanding Bands
  Surface work, shortening, and removal

• Safety Bit
  Cuticle work, polish nail side edge

• Large Barrel
  Surface work back fil cutting, shorten, infil cuticle

• Small Barrel
  Surface work

1. ON/OFF Speed control knob.
2. Handpiece
3. Drill bit hole
4. F/R button
5. Handpiece jack
6. DC socket
   

How to Use?

Step 1: Choose one grinding drill bit, release the handpiece, insert the drill bitat the drill head and lockitin place. ‘The drill bit hole could be used to place the nail il bts.

Step2: Connect the handpiece to the handpiece jack

Step 3: Rotate the ON/OFF button to turn on the device.

Step4: Rotate the speed control knob to accelerate. or decelerate the rotation speed.

Step5: Change the rotation direction of the grinding drill bit on the F/R buttonif needed.

Step6: After the polishingis finished please tum off the device and rotate the central barrel and take out the drill bit.

How to Replace Drill Bit?

Please make sure that the desired bit is suitable for the collet

• Do not move central barrel during operation.

1. Tum central barrel clockwise until hearing a “click” sound to release arillbit. Taking out the blank bar. Put the desired bitinto the handpiece.
2. Turn central barrel counterclockwise until hearing a “click” sound to lock dillbitin place.
3. Be suretoconfirm the rotation of the bit and collet. Please take care of your fingers not to be hurt by bit edge.

Charging

1. Take out the adapter connect it with the DC Socket.
2. Connect the power supply with adapter and nsert the main plug into awallsocket.
3. LCD screenvillshowthe battery.

Problem and Terms of Settlement

1. Motor burns out
2. Bearing damages (Loud Noise)

| Turn off the powerwhen changing the nail drill bit.
The power is on when not in use| Turn off the power when not in use.
Long time, Large load work|

1. Motor burns out
2. Device lifespanshortens
3. Bearing damages (Loud Noise)
4. Handpiece damages

| The continuous working time should not be too long when the working condition is in heavyload. When the device is overheating, it should be stopped immediately to make it return to normal temperature.
Insert into a mismatched power supply|

1. Motor burns out

| According to thedevice voltage requirements, insert the matching power supply.
Put the power cord at random/ Pull thepower cord|

1. Device lifespan shortens
2. Power cord brokes
3. Poor connection
4. Easy to cause short circuit

| Do not pull the power cord.
Replace the original charger randomly|

1. Device damages
2. Easy to cause short circuit

| Use the original specification charger.
Dust into device|

1. Bearing damages (Loud Noise)
2. Motor gets hot
3. Rotational speed slows down
4. The potentiometer speed regulation fails
5. 1-landpiece damages

| Clean dust add the dust-proof protection of the dust proof hood.
Device drops to the ground or by other impacts|

1. The ON/OFF button doesn’t work
2. The potentiometer speed regulation fails
3. F/R button doesn’t work
4. HandpieCe damages

| Avoid device drops or by other impacts (If the handpiece wasdamaged, it can be purchased separately.)
Insert the nail drill bit into the device incorrectly /Rotate the central barrel into the place incorrectly /Take the drill bit out when the central barrel is locked|

1. Drill bit falls out
2. High vibration
3. Drill bit stucks
4. The Handpiece studsand cannot be turned on
5. Handpiece damages

| Insert the nail drill bitinto the devicecorrectly/If the drill bit Blocks.please release the handpiece and try to take outithard/Rotate the central barrel correctly.
Replace drill bit when handpiece is notcompletely stopped|

1. The handpiecestucks and cannot be turned on
2. Handpiece damages

| Do not replace drill bit when handpiece is not completely stopped.
Overcharge|

1. Battery Reopen shortens

| Notified exceed the specified charging time
The size of drill bit is not suitable|

1. Can not insert the drill bit into the device

| Use standard drill bit.
Water into thedevice/Operate in wet ormoist conditions/Use awet cloth to clean thedevice|

1. Motor burns out
2. Device lifespan shortens

| Do not operate in wetor moistconditions/Only a drycloth is allowed forcleaning.

Specifications

Input voltage range: 100-240V 50/60Hz
Output voltage: 24V/1A

E-mail: [email protected]
E-mail: [email protected]
Website: www.melodysusie.com

Warranty and Customer Service

MelodySusie offers a 6 months limited warranty on quality related issues. Please apply for your extra 6 months warranty extension and download theinstruction manual in other languages by registering on wwwmelody susiecomif needed.

“Thank you for purchasing from MelodySusie. You are welcome to share your experience after receiving the product. Please contact us for any technical support if needed.

vwwmelodysusie.com

Us service: [email protected]

Uk service: [email protected]

FR service: [email protected]

DE service: [email protected]

Whipple Rd, Union City, CA 94578

AM2LAB Gk
Laubenhof 23, 45326 Essen, Germany

THEMIS AR support td.
85 Great Portland St. London, United Kingdom, W1W 7LT

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>