GETPRO B08TBVR8N1 32 x24 Inch Beveled Rectangular Mirror Instruction Manual
- June 5, 2024
- GETPRO
Table of Contents
Build For Luxury Life INSTALLATION MANUAL
Do Not Return Product to the Store. Contact the GETPRO® service team with any
questions
Service@getprohome.com
AFTERCARE INSTRUCTIONS
Clean using a soft dry cloth only when turned off. Never use cleaning agents
or abrasive materials. Do not allow moisture to come into contact with the
lamp.
EXTENDED WARRANTY SERVICE
Please send your Purchasing Order No. to
service@getprohome.com to register an
extended 2 years warranty on hardware components. We pride ourselves with a
100% Customer Satisfaction Guarantee. We are confident in our products and
stand behind the 100%. Just reach to us with any questions or concerns and we
will be happy to help in less than 24 hours!
**IMPORTANT NOTICE
We will guarantee all customer benefits. The products we ship out are brand
new. Please check carefully before installation, compare all parts with the
parts listed in the package contents section. If any part appears missing or
damaged, do not install it. Contact customer service by E-mail:
service@getprohome.com
Send us the pictures or video, we promise will respond to you within 24 hours.
We will decide to send you spare parts or deliver a replacement by free.
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you
carefully read through this instruction sheet, refer back to them during
installation to ensure your product is fitted safely and correctly. Keep these
instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage. If any part is dam-aged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care, are factors
that can’t be built into any product. These factors must be supplied by the
person(s) caring for and operating the fixture. Do not install this fixture in
hazardous locations.
TOOLS REQUIRED
HARDWARE LIST
ITEM| REFERENCE IMAGE| NAME|
QTY
1| | Glass| 2
2| | Screw ST4*35| 4
3| | Wall Anchor| 4
Step 1
Use the tape measure to survey the height from the installation hole to the
wash basin and the width between the two holes, then draw the horizontal and
the vertical line.
Step 2 Drill the hole and inject the green rubber pellets
Step 3 Drive in the screw cross the bottom support.
Step 4 Hang the mirror on the support
Step 5 The assembly is done. You can connect the wall supply and be rest assured to use the mirror.
Step 6
Install the glass shelf. Adjust the height according to your preference.
The opening of the mirror cabinet door is 165°
Step 7 You can choose the height according to your preference
Pull out the original small accessories Insert supporting parts
After power on,
the button shows blue and it is in waiting for state
Click the light button to turn on and the color changes to white Click again
to change the light color Click the fourth time to turn off the light
Long press to make the light
gradually dims Long press again and the light gradually brightens
After power on, the button shows blue and it is in waiting for state lick to
turn on the defogging function and the button turns to white Click again to
turn off the defogging function and the button turn to blue
Long press for the first time, the light turns to light-blue The minutes
blink, you can click to adjust the minute scores to increase by 1 minute each
time Long press again The hour blink, you can click to adjust the hour to
increase by 1 hour each time
Long press for the third time to automatically save and exit the adjustment
Questions, problems, missing parts?
Before returning to the store, contact GET PRO Customer Service
service@getprohome.com
Retain this manual for future use.
www.getprohome.com
E-mail:service@getprohome.com
Hotline:+1 5714125962
Documents / Resources
|
GETPRO B08TBVR8N1 32 x24 Inch Beveled Rectangular
Mirror
[pdf] Instruction Manual
B08TBVR8N1, 32 x24 Inch Beveled Rectangular Mirror, B08TBVR8N1 32 x24 Inch
Beveled Rectangular Mirror, Beveled Rectangular Mirror, Rectangular Mirror,
Mirror
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>