Getpro HD-YYQ-BK-02 4-Piece Bath Hardware Set Installation Guide
- October 30, 2023
- GETPRO
Table of Contents
Getpro HD-YYQ-BK-02 4-Piece Bath Hardware Set
Thank you for choosing Ge Yeas products. We are confident that the product’s reliability will exceed your expectations.
The functionality, aesthetics, and durability are at their highest
quality!
The comprehensive support will grant full satisfaction for years, reflecting
the commitment to quality, innovation, and the environment as part of Ge
Yeasn.
Parts
TOOLS REQUIRED
Installation steps
- Locate where you would like to install the towel bar. Place a base onto the wall and trace around it with a pencil(fin. 1).
- Unscrew the slotted set screw of the base and remove the mounting plate.
- Place the mounting plate in the center of the pencil outline you just made and mark the location of the mounting screws(fig. 2). Drill holes at the marked locations(fig.3).
- Insert anchors into the holes with a hammer until flush with the wall (fig .4).
- Screw the mounting plate(with the lips facing out)to the wall with the mounting screws(fig.5).
- Repeat steps 1 through 5 with the other side.
- Place the unit, with the small hole in the base underneath, over the mounting plate by tightening the slotted set screws with a flathead screwdriver until the base is tightly fixed (fig.6).
Cleaning
- Clean with a damp cloth only
- Avoid using metal or abrasive polishes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>