levenhuk Wezzer Cook MT20 Cooking Thermometer User Manual

June 3, 2024
levenhuk

levenhuk Wezzer Cook MT20 Cooking Thermometer logo

levenhuk Wezzer Cook MT20 Cooking Thermometer

levenhuk Wezzer Cook MT20 Cooking Thermometer product

Product description

levenhuk Wezzer Cook MT20 Cooking Thermometer 01

  1. ON/OFF button
  2. HOLD button
  3. °C/°F button
  4. LCD screen Battery
  5. compartment 

Levenhuk Wezzer digital cooking thermometers are designed for the temperature measurement of various types of food and dishes during the cooking process.
Clean the probe thoroughly before and after every use.
Using. Unfold the probe from its housing and the LCD will immediately display the temperature. Insert the tip of the probe at least 1cm into the measured material. The current temperature will be shown on the display. Wait a few seconds to let the temperature stabilize. Press (3) to change the temperature unit (Celsius, °C / Fahrenheit, °F). Press (1) to turn the device off.
Capture the current temperature. Before withdrawing the probe from food, press (2) to hold the temperature reading.
Suggested temperatures for various meat types and degrees of doneness:

Meat type Doneness °C °F
Ground Beef Well done 71°C 160°F
Ground Poultry Well done 74°C 165°F
Beef Well done 77°C 171°F
Medium Well 71°C 160°F
Medium 66°C 151°F
Medium rare 60°C 140°F
Rare 52°C 126°F
Veal Well done 74°C 165°F
Medium Well 71°C 160°F
Medium 66°C 151°F
Medium rare 60°C 140°F
Rare 52°C 126°F
Chicken/Poultry Well done 74°C 165°F
Pork Well Done 77°C 170°F
Medium Well 74°C 165°F
Medium 71°C 160°F
Lamb Well done 77°C 171°F
Medium Well 74°C 165°F
Medium 71°C 160°F
Medium rare 63°C 145°F
Rare 60°C 140°F
Fish Well done 63°C 145°F

Specifications

  • Operating temperature range, °C/°F  –50… 300/–58… 572
  • Probe length, mm                                110
  • Power supply                                        1pc AAA battery

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Never leave the thermo probe inside a working oven or microwave, remove the device immediately after measuring the temperature. Keep the device away from open flames and hot surfaces. Always wear protective gloves during and after using the thermo probe due to the risk of burns. After each usage, wash the steel probe in soapy or running water. Place the steel probe in hot water for a few minutes in order to sterilize it. The device is not dishwasher safe. Never use a damaged device. Use the device only for its intended purpose. The device is suitable for indoor use only. Strictly follow the instructions and do not disassemble or drop the device as it may result in a loss of functionality. Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk International Lifetime Warranty

All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.
For further details, please visit: www.levenhuk.com/warranty If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals