HUDORA Tri Kickboard Instruction Manual

: June 3, 2024
: hudora

Table of Contents

HUDORA Tri Kickboard
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
TECHNICAL SPECIFICATIONS
SAFETY INSTRUCTIONS
INSTRUCTIONS ON ASSEMBLY
DRIVING INSTRUCTIONS
MAINTENANCE AND STORAGE
WHEEL CHANGE
BEARINGS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA Tri Kickboard

HUDORA Tri Kickboard-fig1

CONGRATULATIONS ON PURCHASING THIS PRODUCT!

Please read these instructions carefully. The instructions are an integral compo-nent of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Tri-Scooter
Item number: 11066, 11067
Dimensions: approx. 62 cm in length, deck approx. 34 x 13,5 cm
Product weight: approx. 3,9 kg
Class: A, 100 kg maximum user weight
Purpose: Leisure scooter for use on public areas, no toy.
If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

CONTENTS
1 x Body of the scooter | 1 x Handlebar | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.

SAFETY INSTRUCTIONS

Wear suitable protective clothing for your own safety. Wear personal protective equipment. This includes at least: hand/wrist guards, knee pads, head protection and elbow pads. Never use the scooter without shoes!
The scooter is only intended for use by one person.
Only use the scooter on surfaces that are suitable for it, i.e. those which ar flat, clean, dry, and use the scooter where possible away from other road users.
Avoid sloping ground. The brakes may become hot if the scooter has been used for a while! Your footwear could be damaged! The brakes shouldn’t be touched until they have cooled down.
Always be considerate of others.
Before you begin – Ensure that all fasteners and locking parts are intact and tight, e.g. the folding mechanism and the height setting of the handlebar. The functions of self-securing screw threads can be impaired after repeated loosening and tightening of the connecting elements. Check especially for the correct alignment and fastening of the steering set-up.
Do not use the scooter at twilight, at night or in poor visibility. Do not use it on roads or thorough-fares or on slopes or hills. Avoid being in the proximity of stairs and open water.
The scooter is not suitable for jumps.
Prior to using the scooter, please inform yourself about restricting applicable traffic regulations for the intended area of application.
The use of the product requires specific skills and knowledge to be able to avoid injuries due to crashes and collisions.
Children should only use the product when they are under adult supervision.
Ensure when riding that the logo on the handlebar points to the front or else that the push buttons is as such oriented backwards.

INSTRUCTIONS ON ASSEMBLY

The scooter will be delivered to you in 2 parts (body and handlebar) (Fig. 1). You will have to proceed as follows in order to set up the scooter for use:

Press in the safety push button at the lower end of the handlebar and push the handlebar such that the handlebar is aligned in the envisaged opening on the scooter body, with the logo to the front while riding. You will hear a click, when the safety pushbutton locks into place (Fig 2). To adjust the handlebar height open the quick release (Fig. 3). If necessary, press the safety push button (Fig. 4) and pull the handlebar stem with the grips upwards or else push it down until the safety push button snaps into place at the desired position. Close the quick release in such a position again. Turn the nut on the quick release clamp to tighten more firmly, in the event that you have not been able to achieve a satisfactory fixation. You will have to proceed as follows in order to again transform the scooter into a transport state:
Press the safety push button from the bottom side of the deck (Fig. 5), so that you can pull out the handlebar (Fig. 6). On the underside of the deck is a fold-out mount
for the handlebars. You can attach the handlebar there to transport the scooter compactly.

HUDORA Tri Kickboard-fig8

USAGE INSTRUCTIONS

NOTHING’S EASY AT FIRST …
most accidents happen to “beginners” within the first ten minutes. Particular care should be taken during this stage

DRIVING INSTRUCTIONS

The scooter moves when a foot is used to regularly push off, just as with well-known children’s scooters. Braking is no problem either – simply step on the friction brake over
the back wheel (mudguard). The steering of this scooter works through weight shift.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone. Replace damaged or worn assembly parts in order to ensure the safety of your
scooter.

WHEEL CHANGE

Replacement wheels are available as accessories from http://www.hudora.de/ and should be replaced when they get worn down. To change the wheels, loosen the axle fitting with two Allen keys and remove the wheels from the axle. A screwdriver or Allen key can be used to push the bearings out of the wheel in order to use them again in the new wheels. However, it is usually advisable to change the bearings when the wheels are being changed. Put the bearings into the new wheel with the spacer sleeve and mount them to the frame with the axle screws. Make sure that the axle has been screwed on tightly before starting again!

BEARINGS

Your kick scooter is equipped with precision ball bearings, which were filled with grease under high pressure, during manufacture. For this reason, the rollers of the kick scooter only run lightly and swiftly, while under load. Bearings are maintenance- free, but they are wear parts. Caution! Worn bearings make conspicuous audible noises and their function is constrained. In order to maintain optimal riding pleasure and to ensure lasting safety, you should replace bearings, as soon as they begin to exhibit signs of being worn. In the case of full load and daily use we recommend the replacement of the rollers and bearings twice a year. Bearings are available as accessories under http://www.hudora.de/.

DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection point in your area. Local waste management companies will be able to answer your questions on this.

SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. Therefore, you can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.