HUDORA 76935 Soccer Goal Expert 300 Instruction Manual

June 12, 2024
hudora

HUDORA-logo

HUDORA 76935 Soccer Goal Expert 300

HUDORA-76935-Soccer-Goal-Expert-300-product

Product Information

The product is a soccer goal called Soccer Goal Expert 300. The item number is 76935. The dimensions when assembled are 300 x 200 x 120 cm. The purpose of the product is to provide a stable training goal for versatile throwing, shooting, and goalkeeper training.

The product comes with 18 goal posts, 1 goal net, 1 screw set (16 pcs.), 7 pegs (for fixation), 4 lanyards for fixing the net/tension line, 8 hook and loop fasteners for fixing the net, 1 wrench (SW4), and assembly instructions. Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.

Product Usage Instructions

Before starting the assembly, lubricate the connection assemblies on the narrow ends a bit to facilitate the assembly and extend the durability of the product. The product must be assembled by 2 adults.

  1. Take out all the parts from the package.
  2. Assemble the goalposts according to the instructions provided.
  3. Attach the net to the goalposts using the provided lanyards and hook-and-loop fasteners.
  4. Fix the goal securely to the ground using the provided pegs.
  5. The product is now ready to be used for versatile throwing, shooting, and goalkeeper training.

If you have any assembly problems or would like further information on the product, visit http://www.hudora.de/.

PARTS LIST

HUDORA-76935-Soccer-Goal-Expert-300-fig- \(1\) HUDORA-76935-Soccer-Goal-Expert-300-fig- \(2\)

CONGRATULATIONS ON PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

  • Item: Soccer Goal Expert 300
  • Item number: 76935
  • Dimensions when assembled: 300 x 200 x 120 cm
  • Purpose: Stable training goal for versatile throwing, shooting, and goalkeeper training.

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

CONTENTS

  • 18 x Goalposts
  • 1 x Goal net
  • 1 x Screw set (16 pcs.)
  • 7 x Pegs (for fixation)
  • 4 x Lanyards for fixing the net/tension line
  • 8 x Hook and loop fastener for fixing the net
  • 1 x Wrench (SW4)
  • 1 x These instructions

Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.

SAFETY INSTRUCTIONS

  • WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard.
  • WARNING! Do not climb on the goal frame or net or hang from the goalposts. There is a serious risk of injury!
  • Prior to use, check all parts of the goal for damages and correct assembly. In this regard, it is important to check the connecting elements and screw connections for stability and fit. Any sharp edges that might have formed must immediately be removed!
  • Children should only use the product when they are under adult supervision.
  • No liability is assumed for damages resulting from an incorrect application of the instruction manual.

ASSEMBLY INSTRUCTIONS

Notice:
The product must be assembled by 2 adults. Lubricate the connection assemblies on the narrow ends a bit before starting the assembly. That facilitates the assembly and extends the durability of the product!

Assembling the goalpost frame (fig. 1)
Mount the goal frame as shown in Fig. 1. Be sure to use the appropriately numbered tubes. The frame tubes of the main frame 1 – 5 (posts and crossbar) have a diameter of 75 mm and are first inserted into each other and then screwed. Use a screw (13) with a washer (14) as shown in figures A + B at the top and bottom of the crossbar and at the back of each of the two posts. The tubes of the rear goal frame (tubes with 32 mm diameter) are connected via click connections. Make sure that the bars engage audibly.

HUDORA-76935-Soccer-Goal-Expert-300-fig- \(3\)

Assembly of the goal net (figs. 2 and 3)
Firstly use the hook and loop fasteners (15) to attach the net to the top corners of the frame forming the back of the goal. This prevents the net from falling down during the fitting of the net. The small pennants sewed into the net (12) indicate the top corners of the goal and are used to position the net on the frame. Fasten the goal net (12) to the main frame by threading the fastening string (17) as shown alternately through the rear wave profile on the main frame and the mesh of the net. Thread the fastening string (17) around the tubes and through the mesh of the net along the bottom of the rear frame of the goal. The ends of the fastening strings should then be knotted to the rear wave profile and the frame tubes. The fastening strings should begin/end at the points shown in Figure 3. Then thread the last fastening string (19) as shown through the upper mesh of the net and secure it to each side of the rear frame of the goal. This acts as an additional tensioning string for the net.

HUDORA-76935-Soccer-Goal-Expert-300-fig- \(4\) HUDORA-76935-Soccer-Goal-Expert-300-fig- \(5\)

Stand locking of the goal
Finally, fix the goal frame by means of the pegs (18) on the ground. Ascertain that the ground is suitable for the application of pegs (e.g. no water pipes for sprinkler devices!). Make sure that the pegs are completely driven into the ground and have a firm position. Avoid protruding fastenings (risk of stumbling). On too hard grounds the goal must be saved by appropriate measures in another way against overturning in order to prevent risk of injuries (e.g. with slabs or sandbags). Never play with an unsecured goal or never leave the goal unsecured respectively.

USAGE INSTRUCTIONS

  • Only set up the goal on level ground.
  • Please keep a minimum distance of at least 3 m to any surrounding obstacles.
  • Secure the goal to keep it from toppling over – even if not in use.
  • Avoid exposing the product unnecessarily to bad weather conditions. Keep it in a cool and dry storage area.
  • Check for any rust on the product and remove it immediately. Pushing together the metal parts could lead to the protective layer being scratched and rust developing.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use the original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used anymore. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise, however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems, and lost assembly manuals at http://www.hudora.de/.

All images are examples of the design.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals