HUDORA 76900 Soccer Goal Freekick With Target Shot Instruction Manual

: June 12, 2024
: hudora

Table of Contents

HUDORA 76900 Soccer Goal Freekick With Target Shot
Product Information
Technical Specifications
SAFETY INSTRUCTIONS
INSTRUCTIONS ON ASSEMBLY
Assembly of the Target Shot

HUDORA 76900 Soccer Goal Freekick With Target Shot

Product Information

The soccer goal Freekick with target shot (item number: 76900, 76922) is a versatile training tool for soccer players. The dimensions of the goal when assembled are 213 x 152 x 76 cm. The package includes 18 goalposts, 1 goal net, 5 tent pegs for stand fixing, 6 tent pegs for fixing the target shot, 1 screw set, 4 cords, 1 target shot, and 1 set of instructions. The product is designed to facilitate safe transportation and comes with additional items that are not required for installation and use.

Technical Specifications

Item: Soccer goal Freekick with target shot
Item number: 76900, 76922
Dimensions when assembled: 213 x 152 x 76 cm
Purpose: Soccer goal for versatile shooting and goalkeeper training

SAFETY INSTRUCTIONS

WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard.
W ARNING! Do not climb on the goal frame or net or hang from the goalposts. There is a serious risk of injury!
Prior to use, check all parts of the goal for damages and correct assembly. In this regard, it is important to check the connecting elements and screw connections for stability and fit. Any sharp edges that might have formed must immediately be removed!
C hildren should only use the product when they are under adult supervision.
No liability is assumed for damages resulting from an incorrect application of the instruction manual.

INSTRUCTIONS ON ASSEMBLY

Assembly of the Goal Frame

Assemble the goal frame as indicated in fig. 1.
Observe that you use the respectively numbered tubes.
Lubricate the connection assemblies on the narrow ends a bit before starting the assembly. This facilitates the assembly and extends the durability of the product.

Assembly of the Goal Net

The little flags sewed in the net indicate the upper goal corners.
Fasten the goal net on the goal frame by fastening the hook and loop fasteners sewed in the net firstly on the tube parts 9 to 11.
Then thread the cord as indicated in fig. 2 around the tubes and knot the loose ends.

Assembly of the Target Shot

Spread the target shot and fasten it on the crossbar and the sides of the goal frame by means of rubber cords and plastic clips.
Then secure with pegs the bottom line on the ground as indicated in fig. 3.
Pay attention that the clips are on the back side of the target shot so that they cannot be hit by the ball.

Stand locking of the goal

Finally fix the goal frame by means of the pegs on the ground. Ascertain that the ground is suitable for the application of pegs (e.g. no water pipes for sprinkler de-vices!). Make sure that the pegs are completely driven into the ground and have firm position. Avoid protruding fastenings (risk of stumbling). On too hard grounds the goal must be saved by appropriate measures in another way against overturning in order to prevent risk of injuries. Never play with an unsecured goal or never leave the goal unsecured respectively.

USAGE INSTRUCTIONS

Only set up the goal on level ground.
Please keep a minimum distance of at least 3 m to any surrounding obstacles.
Secure the goal to keep it from toppling over – even if not in use.
Avoid exposing the product unnecessarily to bad weather conditions. Keep it in a cool and dry storage area.
Check for any rust on the product and remove it immediately. Pushing together the metal parts could lead to the protective layer being scratched and rust developing.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use the original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used anymore. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE
We make every effort to deliver faultless products. If faults do arise, however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.