HUDORA 14492 Throne Cable Lock Instruction Manual

: June 8, 2024
: hudora

Table of Contents

HUDORA 14492 Throne Cable Lock
Product Usage Instructions
FAQ
TECHNICAL SPECIFICATIONS
USAGE INSTRUCTIONS
SERVICE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 14492 Throne Cable Lock

Specifications

Item: Cable lock
Item number: 14492
Length: 80 cm
Product weight: ca. 50 g
Purpose: Basic protection against theft of objects

Product Usage Instructions

Opening and Closing the Lock

To unlock, set the combination to 0-0-0. Press button A and hold it. Slide button B to secure the cable. To retract the cable, keep button A continuously pressed.

Maintenance and Care

The product is resistant to rust but strong and persistent moisture can damage it. If the product is accidentally exposed to high moisture, dry it thoroughly and if needed, apply suitable lubricant to ensure smooth operation.

Disposal Instructions

At the end of its life cycle, please dispose of the product at an appropriate waste collection point. For disposal inquiries, contact a waste management company.

FAQ

Q: How do I set the combination for the lock?

A: To set your desired combination, follow these steps:…

Q: What should I do if the lock gets jammed?

A: If the lock jams, try applying lubricant to the moving parts and gently wiggle the mechanism to release it. If the issue persists, contact HUDORA for assistance.

Q: Where can I find spare parts for the cable lock?

A: Spare parts and additional information can be found on the HUDORA website at http://www.hudora.de/ or by contacting customer service.

CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for

TECHNICAL SPECIFICATIONS

Item: Cable lock | Item number: 14492
Length: 80 cm | Product weight: ca. 50 g
Purpose: Basis protection against theft of objects.

CONTENTS
1 x Cable lock | 1 x These instructions Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.

SAFETY INSTRUCTIONS

Warning! Keep the product out of the reach of children. There is a risk of strangulation due to the long cable.
Warning! When opening the lock and retracting the cable, the cable can lash out. Risk of injury!
Warning! In order to avoid injuries on open wire ends and to prevent damage (e.g. lacquer damage) to the protected object, the casing of the cable should be tested for its integrity before each use.

USAGE INSTRUCTIONS

CHANGING THE SECURITY CODE (FIG. 1)

Before using the lock for the first time, change the default security code 0-0-0. To change the security code, set the current code. Then press the regulation button A to fully retract the cable. Now press down the locking bolt B until you hear it click into place. Set your desired combination and pull the locking bolt B out again. The code is now changed. Do not Vforget it!

SECURING OF OBJECTS
The correct security code must be set to use the lock. Pressing the regulation button A allows the cable to be easily pulled in and out. Pull out the cable to the desired length, secure the object, and then insert the locking bolt B into the lock until it audibly clicks into place. Retract the cable by pressing the regulation button A as much as needed. Change the combination. To reopen the lock, set the correct security code and press the release button C. Hold on to the locking bolt B when opening it, to secure the lashing cable. To retract the cable, keep pressing the regulation button A.

MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only.
These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.
The product is splash-proof. Intense and persistent humidity can damage it. If the product has accidentally been exposed to excessive humidity, dry it thoroughly and, if necessary, put it back in working order with a suitable lubricant.

DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. Therefore, you can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

Hersteller: HUDORA | Alte Papierfabrik 28 | 40699 Erkrath | Germany
www.hudora.de