HUDORA A324857 Pro Biomechanical Protectors Set Instruction Manual

: June 4, 2024
: hudora

Table of Contents

Pro Biomechanical Protectors Set
INSTRUCTIONS ON ASSEMBLY AND USE
TECHNICAL SPECIFICATIONS
DIMENSIONS IN CM
INDICATION OF SIZES
THE PROTECTORS WILL FIT USERS WITH A GIRTH SIZE IN CM AS FOLLOWS
SAFETY INSTRUCTIONS
USAGE INSTRUCTIONS
MAINTENANCE AND STORAGE
DISPOSAL ADVICE
SERVICE
Documents / Resources

Pro Biomechanical Protectors Set
Instruction Manual
A324857

Pro Biomechanical Protectors Set

Production date

TYPE-EXAMINATION CERTIFICATE ISSUED BY
DOC’s internet address is
https://www.hudora.de/Konformitaetserklaerung

HUDORA A324857 Pro Biomechanical Protectors Set -

INSTRUCTIONS ON ASSEMBLY AND USE

CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use.
The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item:| Protector set Kids | Comfort | Pro
---|---
Item number:| 83046, 83047, 83048, 83049 | 83051, 83052, 83053, 83054 | 83056,
83057, 83058
Size:| XS (83046 | 83048), S (83047 | 83049 | 83051 | 83053), M (83052 |
83054 | 83056), L (83057), XL (83058)
Purpose:| This set of protectors is designed to protect against impact caused by the collision of part of the body with an obstacle while doing roller sports. It has passed EN14120:2003 + A1:2007 to show conformity to the EHSR of EU 2016/425. These protectors are for level 1 – for the normal roller skating sport.
They are not suitable for acrobatic roller skating sports, which refers to level 2 protectors.

DIMENSIONS IN CM

| Size XS| Size S| Size M| Size L| Size XL
---|---|---|---|---|---
Palm protectors:| 13 x 8| 14 x 8| 14x 9| 15 x 10| 15x 10
Elbow protectors:| 12 x 9| 13 x 10| 18x 12| 19x 13| 19,5 x 13,5
Knee protectors:| 12,5×10| 15 x 12| 19,5 x 14| 22×16| 23×18

INDICATION OF SIZES

The protectors are available in sizes XS, S, M, L, and XL.

Weight class	For user	Protectors
EN 14120:2003 + A1:2007	weight	XS
Range A	< 25 kg	√
Range B	25 – 50 kg
Range C	> 50 kg

THE PROTECTORS WILL FIT USERS WITH A GIRTH SIZE IN CM AS FOLLOWS

| Size XS| Size S| Size M| Size L| Size XL
---|---|---|---|---|---
Palm protectors:| 15,5| 17,5| 19| 21,5| 23
Elbow protectors:| 22| 26| 29| 32| 35
Knee protectors:| 27,5| 33| 38| 43| 48

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

CONTENTS

1 pair of palm protectors
1 pair of elbow protectors
1 pair of knee protectors
1 instruction manual
Other items are meant to facilitate safe transportation and are not required for the installation and use of the product.

SAFETY INSTRUCTIONS

These protectors are suitable for users of cycles, skateboards, roller skates, and inline skates. These protectors are not suitable for use on motorcycles. They are not suitable for acrobatic or high-speed skateboarding and skating.
Your protectors must fit correctly so that they do not move during a fall. Before you get moving make sure that everything is positioned correctly. The protectors should sit comfortably. It is extremely important to first make sure that the protectors offer you sufficient free room even when closed. Take care not to risk cutting off your blood circulation. Remember never to skate without your protectors and a helmet!
Before each use, especially after a fall or accident, check the protectors for damage. The protectors should be discarded and replaced if the shell shows denting, cracking, deep scratches, or discolorations / the padding underneath the shell is compacted or holed / the straps never no longer fasten, have become overstretched, torn, or abraded / the protectors no longer fit or cover the intended areas!
Do not make modifications in any way that may impair the safety of the products!
Even under the correct use, your protectors cannot guarantee you 100% protection against injury. Always carry out your sport carefully. To reduce the risk of injury, skate sensibly and within your ability.
The protectors will only offer limited protection in the even-to-flow velocity impacts with stationary hard surfaces!
These protectors are not intended to provide protection in the event of a serious fall when traveling at speeds in excess of 13 km/h!
They will not protect the wearer in the event of collisions with moving vehicles!
Changes in environmental conditions, such as temperature, would significantly reduce the performance of the protector!
Contamination, alteration to the protector, or misuse would dangerously reduce the performance of the protector!
In the case of proper maintenance and storage, the maximum service life of the protectors is 7 years after the production date. After this period, the protectors must be replaced.

USAGE INSTRUCTIONS

The size classes are just for orientation. If the protectors do not sit firmly and comfortably another size should be chosen.
The anatomically formed shells (PP) offer a great fit, high wearing comfort, and keep joints in their correct position. The tough shell and padding (EVA) minimize shock during a gall and prevent rubbing and nicks. The major materials are nylon, EVA, polyester, and PP (polypropylene).
Palm protectors (fig. 1):
Help to protect your wrist during a fall. The support under the hand helps to cushion the fall. The shape helps to minimize grazes on the fingers and helps you to glide during a fall.
Elbow protectors and knee protectors (fig. 2 & 3):
Help you glide along the asphalt when falling, so that the fall is cushioned.

HOW TO PUT ON YOUR PROTECTORS
If children use the protectors, adult supervision is recommended during fitting. Always wear the protectors on the correct side.
The left side is marked with an “L“, and the right side with an “R”.
Palm protectors (fig. 1):
Open the hook and loop fastening and insert your thumb into the hole, so that the palm of your hand lies on the cushioned back of the shell. The palm protector should be fitted so that the crash plate protects the palm and wrist. Now tighten up the straps and fasten the hook and loop fasteners for a comfortable fit.
Elbow protectors and knee protectors (fig. 2 & 3):
Open the hook and loop fastenings and pull on the sock. Fit the elbow protectors so that the point of the elbow is fitted snugly into the center of the elbow protector. And ensure that the knee protectors are placed symmetrically over the kneecap. Fix the straps and hook and loop fasteners so that the protectors are secure.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents!
Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use the original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used anymore. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

Do not wash! Do not use strong cleaners or detergents! Do not iron! Do not tumble dry! Do not bleach!
Always clean with a damp cloth and water only. The use of chemical and cleaning solvents, paints, and abrasives can cause unseen damage to the protectors and reduce their ability to protect. Use clear water only. If your protectors are very dirty try to clean them gently with lukewarm water and a brush. Rinse the protectors with clear water. Do not dry the protectors on heating. After use, you should try to air your protectors in a room with good air circulation. Never leave your protectors exposed to direct sunlight or heat. Elevated temperature beyond 40° C would dangerously reduce the performance of the protectors.

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise, however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems, and lost assembly manuals at http://www.hudora.de.

Hersteller: HUDORA
Jägerwald 13
42897 Remscheid
Germany
www.hudora.de

Documents / Resources

| HUDORA A324857 Pro Biomechanical Protectors Set [pdf] Instruction Manual
A324857, Pro Biomechanical Protectors Set, A324857 Pro Biomechanical Protectors Set
---|---