HUDORA 76933 Expert 180 Soccer Goal Instruction Manual

: June 12, 2024
: hudora

Table of Contents

PARTS LIST
ASSEMBLY
TECHNICAL SPECIFICATIONS
CONTENTS
SAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
USAGE INSTRUCTIONS
MAINTENANCE AND STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 76933 Expert 180 Soccer Goal INSTRUCTIONS ON ASSEMBLY AND USE
Hersteller: HUDORA | Jägerwald 13 | 42897 Remscheid | Germany
www.hudora.de

PARTS LIST

HUDORA 76933 Expert 180 Soccer Goal - tools

ASSEMBLY

HUDORA 76933 Expert 180 Soccer Goal - Parts 1

CONGRATULATIONS ON
PURCHASING YOUR PRODUCT!
Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private / domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item:	Soccer Goal Expert 180
Item number:	76933
Dimensions when assembled:	180 x 120 x 60 cm
Purpose:	Stable training goal for versatile throwing, shooting and

goalkeeper training.

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

12 x Goal posts | 1 x Goal net | 1 x Screw set (8 pcs.) | 5 x Pegs (for fixation) |
4 x Lanyard for fixing the net / tension line | 8 x Hook and loop fastener for fixing the net | 1 x Wrench (SW4) | 1 x These instructions
Other items included are meant to facilitate safe transportation and are not required for the installation and use of the product.

SAFETY INSTRUCTIONS

WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard.
WARNING! Do not climb on the goal frame or net or hang from the goal posts. There is a serious risk of injury!
Prior to use, check all parts of the goal for damages and correct assembly.
In this regard, it is important to check the connecting elements and screw connections for stability and fit. Any sharp edges that might have formed must immediately be removed!
Children should only use the product when they are under adult supervision.
No liability is assumed for damages resulting from incorrect application of the instruction manual.

ASSEMBLY INSTRUCTIONS

Notice: The product must be assembled by 2 adults. Lubricate the connection assemblies on the narrow ends a bit before starting the assembly. That facilitates the assembly and extends the durability of the product!

Assembling the goalpost frame (fig. 1)
Mount the goal frame as shown in Fig. 1. Be sure to use the appropriately numbered tubes. The frame tubes of the main frame 1 – 3 (posts and crossbar) have a diameter of 75 mm and are first inserted into each other and then screwed. Use a screw (10) with washer (11) as shown in the figures A + B at the top and bottom of the crossbar and at the back of each of the two posts. The tubes of the rear goal frame (tubes with 32 mm diameter) are connected via click connections. Make sure that the bars engage audibly.
Assembly of the goal net (figs. 2 and 3)
Firstly use the hook and loop fasteners (12) to attach the goal net (9) to the top corners of the frame forming the back of the goal. This prevents the goal net (9) from falling down during the fitting of the net. The small pennants sewed into the goal net (9) indicate the top corners of the goal and are used to position the net on the frame. As shown fasten the goal net (9) to the main frame by threading the fastening string (14) alternately through the rear wave profile on the main frame and the mesh of the net. Thread the fastening string (14) around the tubes and through the mesh of the net along the bottom of the rear frame of the goal. The ends of the fastening strings should then be knotted to the rear wave profile and the frame tubes. The fastening strings should begin / end at the points shown in figure 3. Then thread the last fastening string (16) as shown through the upper mesh of the net and secure it to each side of the rear frame of the goal. This acts as an additional tensioning string for the goal net (9).
Stand locking of the goal
Finally fix the goal frame by means of the pegs (15) on the ground. Ascertain that the ground is suitable for the application of pegs (e.g. no water pipes for sprinkler devices!). Make sure that the pegs are completely driven into the ground and have firm position. Avoid protruding fastenings (risk of stumbling). On too hard grounds the goal must be saved by appropriate measures in another way against overturning in order to prevent risk of injuries (e.g. with slabs or sandbags). Never play with an unsecured goal or never leave the goal unsecured respectively.

USAGE INSTRUCTIONS

Only set up the goal on level ground.
Please keep a minimum distance of at least 3 m to any surrounding obstacles.
Secure the goal to keep it from toppling over – even if not in use.
Avoid exposing the product unnecessarily to bad weather conditions.
Keep it in a cool and dry storage area.
Check for any rust on the product and remove it immediately. Pushing together the metal parts could lead to the protective layer being scratched and rust developing.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used any more. If in any doubt, please contact our service team (http://www.hudora.de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.

DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection point provided in your area. Local waste management companies will be able to answer your questions on this. SERVICE
We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. You can find numerous in- formation on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.