HUDORA 72148 Indoor Nest Swing Instruction Manual

: June 12, 2024
: hudora

Table of Contents

HUDORA 72148 Indoor Nest Swing
Product Information
Product Usage Instructions
TECHNICAL SPECIFICATIONS
PARTS LIST
SAFETY INSTRUCTION
ASSEMBLY INSTRUCTION
MAINTENANCE AND STORAGE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HUDORA 72148 Indoor Nest Swing

$HUDORA-72148-Indoor-Nest-Swing-fig- $2$$

Product Information

The Nestschaukel 110 (Nest Swing 110) is a device powered by muscle power, designed for swinging in a sitting or lying position. It has a maximum carrying capacity of 100 kg and is suitable for users aged 3 years and above. The product comes with a parts list and these instructions. All images are examples of the design.

Technical Specifications

Item: Nest Swing 110
Item No.: 72148, 72156, 72183
Maximum carrying capacity: 100 kg

Product Usage Instructions

Check that all parts listed in the parts list are included in the package.
Assemble the Nest Swing according to the instructions provided.
Ensure that the device is securely attached to a suitable support structure before use.
Sit or lie on the Nest Swing and grip the ropes or chains securely.
Use your body’s muscle power to swing back and forth.
Do not exceed the maximum carrying capacity of 100 kg.
Adult supervision is recommended for children under the age of 14.
Inspect the device regularly for any signs of wear or damage and replace any worn or damaged parts immediately.

If you have any assembly problems or require further information on the product, visit http://www.hudora.de/.

CONGRATULATIONS ON PURCHASING THIS PRODUCT!

Please read these instructions carefully. The instructions are an integral component of the product. Therefore, please store them and the packaging carefully in case questions arise in the future. Please always include these instructions when handing on the product to a third party. This product must be assembled by an adult. This product is designed for private/domestic use only. This product is not designed for commercial/industrial use. The use of the product requires certain capabilities and skills. Always adjust according to the age of the user and use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Item: Nest Swing 110
Item No.: 72148, 72156, 72183
Maximum carrying capacity: 100 kg
Dimension: 110 cm ø
Purpose: Device powered by muscle power, for swinging in a sitting or lying position.
Minimum user age : 3 years

If you have assembly problems or would like further information on the product, we have all you need and more at http://www.hudora.de/.

CONTENTS
1 x Nest swing (cf. parts list on page 2) | 1 x These instructions

Other parts which may be included with the delivery in some circumstances are not required

PARTS LIST

$HUDORA-72148-Indoor-Nest-Swing-fig- $3$$

SAFETY INSTRUCTION

WARNING! Maximum load cannot exceed 100kg.
WARNING! Only for domestic use.
WARNING! To be used under the direct supervision of an adult.
WARNING! Not suitable for children under 36 months. The danger of falling!
WARNING! Not suitable for children under 36 months. Long cord. Strangulation hazard.
WARNING! Suitable for outdoor and indoor use!
WARNING! Minimum user age: 3 years.
The owners of the swing as well as the competent supervisory personnel are responsible for ensuring that all users follow the instructions in the operation manual.
Do not make any technical modifications.
Changes to the original product must only be carried out according to manufac-turer specifications.
No one is permitted to gain access to the swing area during use.
Never stand or kneel on the swing.
Always hold yourself firmly with both hands.
No objects of any kind must be in the vicinity of the swing zone (trees, walls, fences, clotheslines).
Make sure that you have a safety clearance of at least 2 m (front and back) beyond the maximum reach of the swing and make sure the ground is level and shock absorbing (e.g. grass) without any sharp edges or pointed objects, obstacles, inclines, levels, steps or hard surfaces (e.g. concrete) etc.
Clearance to stationary components on the side, such as the swing scaffolding must be at least 40 cm.
Swinging components, such as a neighboring swing must be placed at a distance of at least 60 cm.
Maximum raised height must not exceed 2.5 meters as measured from the ground.
I n idle mode, the swing must be at least 40 cm and maximally 60 cm from the ground.
You should never install a swing in such a way that the user could be blinded by sun rays.
The self-locking effect of the self-locking nuts or else lacquer can subside after repeated loosening and tightening of the connection elements.
When permanently irradiated with UV light, the material ages significantly faster. To avoid premature aging and thereby extend the service life, you should always store the product in a dry and dark place when not in use. Do not permanently expose the product to wind, moisture, extreme temperatures or sunlight.

ASSEMBLY INSTRUCTION

$HUDORA-72148-Indoor-Nest-Swing-fig- $4$$

Prior to installation, carefully select and check the location where you will install the swing. Please make sure that the swing carrier is adequately stable. Please also take into account that swinging produces centrifugal forces that can put a lot of strain on the swing carrier. Please consult an expert (statics expert, architect, carpenter) and ask how much load your swing carrier can tolerate. Suspension connectors shall be of a design that will prevent unintentional disconnection. Remove the parts from the packaging and check that they are complete. Check that parts 2, 3, 4 and 7 are already assembled as in fig. A. Now spread the nest (5) on the ground. Insert part of the foam-covered tube frame (1) into each of the four side loops (fig. B), then insert the parts into one another. Ensure that one narrow and one wide tube end is put together in each case. Feed the screw hooks (2) from abo-ve into the tubular frame and tighten the nuts firmly (simplified illustration in fig. C. See also safety notes!) In order to provide for a firm and secure fit of the nut screw, please screw at least the entire height of the nut on the screw hooks (2). The torque for tightening the nut should be between 8 and 10 nm. You can now hang the nest swing from a suitable swing frame using the retaining rings (3).

HANGING DEVICE AND ADJUSTMENT

The hanging points must be at least as far apart as the swing seat + 100mm. The swing is packaged with two ropes and adjustment eyelets (4), so that the height of the swing can be variably aligned with any suitable hanging device. The swing rope (7) can be lengthened or shortened by pushing or pulling it through the adjustment loops (4). The hanging swing can now be individually adjusted. No one should sit on the swing while making the adjustments. When extending or reducing the length of the swing ropes please make sure that the ropes remain equally long at all times. If the lengths of the ropes differ, this will lead to circular pendulum movements of the swing. Make sure that swing is set up in such a way that the person using the swing cannot reach the ground with the tips of his or her toes. If in doubt, perform a few gentle test swings.

MAINTENANCE AND STORAGE

Use a dry or damp cloth only to clean the product; do not use special cleaning agents! Check the product for damage or traces of wear and tear before and after each use. Do not make any structural changes. For your own safety, please use the original spare parts only. These can be sourced from HUDORA. If parts become damaged or if sharp edges or corners should develop, the product may not be used anymore. If in any doubt, please contact our service team (http://www.hudora. de/). Store the product in a safe place where it is protected from the elements, cannot be damaged, and cannot injure anyone.
You should also replace all the plastic parts after a maximum of 5 years to prevent a possible failure of these parts.
Check the product for damage or traces of wear and tear before and after each use. We also recommend before each use:

to check for the firm sitting of nuts and bolts, tighten if necessary
to lubricate moving parts in order to minimize wear
to check all covers of screws and sharp edges and replace if necessary
to replace defective parts according to the manufacturer‘s instructions
t o check swing seats, chains, ropes, and other means of attachments for evidence of deterioration

DISPOSAL ADVICE

At the end of the product’s life, please dispose of it at an appropriate collection point in your area. Local waste management companies will be able to answer your questions on this.

SERVICE

We make every effort to deliver faultless products. If faults do arise however, we put just as much effort into rectifying them. You can find numerous information on the product, replacement parts, solutions to problems and lost assembly manuals at http://www.hudora.de/.

All images are examples of the design.

Hersteller: HUDORA I Jägerwald 13 I 42897 Remscheid I Germany www.hudora.de
Art. Nr. 72148, 72156, 72183 Stand 07/22 1/12