Heimgard AX 1800 Smart Mesh User Guide
- June 3, 2024
- Heimgard
Table of Contents
Heimgard AX 1800 Smart Mesh
WHAT’S IN THE BOX
OVERVIEW
- LED indicator
- Reset button
- Sync button
- WAN/LAN port*
- LAN port
- Power connector
LED indication status
- GREEN SOLID: OK.
- GREEN FLASHING: Booting and connecting to the network.
- BLUE SOLID: New device is ready to pair.
- BLUE FLASHING: Pairing or upgrading, please do not turn during this time.
- RED SOLID: Device is not connected properly or an error is detected, please see the Heimgard Connect app for more information.
- RED FLASHING: Device has a weak signal, please place the node closer to another node to ensure optimal performance (see instructions for optimal placement of nodes in the app).
If adding additional Smart Mesh nodes in your home
- Temporarily, place the new Smart Mesh node near the first Smart Mesh node you set up (at least 1 meter away).
- Connect the new node to a power outlet. Wait a few minutes for the node to boot.
- Either use the Heimgard Connect mobile application and select “add” a new node or Press once the sync button on both your primary node and your new node.
- Your new Smart Mesh node will bind to the network. LED will flash “BLUE” while connecting.
- Wait for the LED on your new Smart Mesh node to become solid “GREEN”.
- You can now disconnect the node from power and move it to its location where you need better Wi-Fi.
- When powering the unit in its final location, check the LED status to confirm the device has a good signal to the primary node.
- If the signal is not ideal (LED is flashing “RED”), please reposition the node for optimal performance.
QUICK START GUIDE
Visit heimgard.com/smartmesh for more information and tips.
Did you know that this Smart Mesh node/system also has a smart home hub built in?
Scan this QR code to download the Heimgard Smart Home app and start connecting all your smart home devices.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>