Heimgard QSG Smart Mesh Black 1 Pack User Guide
- June 9, 2024
- Heimgard
Table of Contents
QSG Smart Mesh Black 1 Pack
User Guide
QSG Smart Mesh Black 1 Pack
https://qr.heimgardtechnologies.com/connect
DOWNLOAD
Use your mobile phone to scan the QR code and
download the Heimgard Connect app on Google Play or Apple App Store.|
INSTALL
Install the app and follow the step-by step instructions to set up your Wi-Fi
mesh node/system.| ENJOY
Explore the app and enjoy seamless high-speed Wi-Fi in your entire home.
What’s In The Box
Wi-Fi mesh node| Ethernet cable| Power adapter
OVERVIEW
- LED indicator
- Reset button
- Sync button
- WAN/LAN port*
- LAN port
- Power connector
“If the node is used as a primary node, the left LAN port will act as WAN.
For the additional nodes, both ports will act as LAN ports.
LED indication status
| GREEN SOLID
OK.
---|---
| GREEN FLASHING
Booting and connecting to the network.
| BLUE SOLID
New device is ready to pair.
| BLUE FLASHING
Pairing or upgrading, please do not turn off during this time.
| RED SOLID
Device is not connected properly or an error is detected, please see the
Heimgard Connect app for more information.
| RED FLASHING
Device has a weak signal, please place the node closer to another node to
ensure optimal performance (see instructions for optimal placement of nodes in
the app).
If adding additional Smart Mesh nodes in your home
- Temporarily, place the new Smart Mesh node near the first Smart Mesh node you set up (at least 1 meter away).
- Connect the new node to a power outlet. Wait a few minutes for the node to boot.
- Either use the Heimgard Connect mobile application and select “add” a new node or Press once the sync button on both your primary node and your new node.
- Your new Smart Mesh node will bind to the network. LED will flash “BLUE” while connecting.
- Wait for the LED on your new Smart Mesh node to become solid “GREEN”.
- You can now disconnect the node from power and move it to its location where you need better Wi-Fi.
- When powering the unit in its final location, check the LED status to confirm the device has a good signal to the primary node.
- If the signal is not ideal (LED is flashing “RED”), please reposition the node for optimal performance.
Visit heimgard.com/smartmesh for more
information and tips.
Did you know that this Smart Mesh node/system also has a smart home hub built
in?
Scan this QR code to download the Heimgard Smart Home app and start connecting
all your smart home devices.
https://qr.heimgardtechnologies.com/smarthome
Documents / Resources
|
Heimgard QSG Smart Mesh Black 1
Pack
[pdf] User Guide
QSG Smart Mesh Black 1 Pack, QSG, Smart Mesh Black 1 Pack, Black 1 Pack
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>