Norauto 2223449 Micro Start Booster Instruction Manual

2223449 Micro Start Booster
Instruction Manual

FOREWORD

Thank you for purchasing this product! The Norauto Micro Start is a compact but powerful jump-starter of 11,000mAh capacity, which can jump-start your car up to 15 times on a single charge. It can be used on petrol engines up to 3.0 litres and diesels up to 2.0 litres. Micro Start can also be used as a Powerbank to recharge your smartphone, thanks to the USB QC3.0 Fast Charge Output, but also using the wireless charging technology. There is also a bright LED working light for emergency issues, as well as a 12V output port, to allow you to use a compressor, cooler or any other 12V device. You can easily check the level of the battery, thanks to the simple LED display. The battery will recharge from a mains outlet. Norauto Micro Start also offers smart clamps with various protections to provide a safe use to consumers in any situation.
You can easily check the level of the battery, thanks to the simple LED display. The battery will recharge from a mains outlet.
Norauto Micro Start also offers smart clamps with various protections to provide a safe use to consumers in any situation.

SPECIFICATIONS

Diesel engines 2.0L
Product net weight| 0.55 kg
Product size| 16.7 x 9.6 x 3.7 cm
Wireless charging power| 10 W
Frequency range| 110-205 KHz
Output power| < 20 dBm
USB output| 5V 3A / 9V 2A
Cigarette socket output| 12V 10A
Jump start port| 12V engine start
Battery capacity| 41.07Wh
Charge input| 14V 0.9A
Ambient operating temperature| -20°C to +55°C
Recommended storage temperature| 0°C to +40°C
Recommended charge temperature| +10°C to +45°C

SAFETY PRECAUTIONS

• BEFORE CHARGING, READ THE INSTRUCTIONS.
• FOR INDOOR USE. DO NOT EXPOSE TO RAIN.
• DISCONNECT THE SUPPLY BEFORE MAKING OR BREAKING THE CONNECTIONS TO THE BATTERY.
• WARNING: EXPLOSIVE GASES. PREVENT FLAMES AND SPARKS. PROVIDE ADEQUATE VENTILATION DURING CHARGING.

– Use this appliance only as described in this instruction manual. Any misuse of the appliance, or use different from instructions, will void the liability of the manufacturer and of the retailer.
– Do not attempt to modify the appliance in any way. Modifications may lead to damage of the appliance, property damage or personal injury for which the manufacturer will accept no liability.
– Cars may have electrical and electronic systems (e.g. engine management systems, mobile phones) that may be damaged if subjected to high starting voltages and voltage peaks. Before connecting the appliance to the car, read the car’s owner manual to confirm that external charging is allowed.
– Non-observance of the safety instructions can cause electric shock, fire and/or injuries to persons.
– Follow the instructions for connecting and disconnecting the battery charger leads or battery terminals.
– This appliance is meant for domestic and indoor use only.
– Do not use any accessory not recommended by the manufacturer/retailer! They may damage the appliance and/or cause injuries to persons.
– CHOKING HAZARD! Keep the appliance and its packaging out of reach of children.
– This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
– Children should be supervised to ensure that they do not play with the appliance.
– Do not operate the appliance in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
– Avoid naked flames, hot surfaces and sparks during the use of this appliance. Do not smoke when using the appliance.
– During charging, the battery must be placed in a well-ventilated area.
– Keep the appliance dry. Do not immerge it into water or any other liquids.
– Keep the appliance away from water and spatters.
– Do not operate the appliance in a humid environment. Do not use in wet places.
– No object containing liquid should be kept around this appliance.
-Do not cover the appliance with objects like paper, towels, curtains, etc.
– Do not expose the appliance to direct sunlight or hot temperatures.
– Do not let the supply cord hang from a table edge; do not let it touch any hot surface.
– When unplugging the appliance, always take hold of the plug itself, never pull the supply cord.
– If the supply cord or the clamps are damaged, do not use the appliance.
– If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
– Do not modify the supply cord or the plug. If the cord and/or the plug do not match your electrical installations, contact a qualified technician.
– An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in fire and electric shock.
– Do not let the red and black clamps touch each other, as it may lead to sparks, explosion and cause damages.
– Before making any electrical connection, check that:
The appliance and its components are not damaged. In this case, do not use the appliance but return it to your retailer for inspection and repair.
The indicated voltage on the rating label matches with your electrical installations.
– Position the battery charger as far away from the battery as the leads will allow.
– Explosive gases may collect near the ground. Place the battery charger as high as possible above ground level.
– Do not leave unattended during charging. Do not carry our any repairs by yourself. Any check, disassembling or repairing has to be carried out exclusively by a qualified person.
– Do not open the casing. There are no user serviceable parts inside.
– Do not place the battery charger above or stand the battery charger on top of the battery.
– The battery terminal not connected to the chassis has to be connected first. The other connection is to be made to the chassis, remote from the battery and fuel line. After the operation, remove the chassis connection and then the battery connection.

SAFETY INSTRUCTIONS REGARDING BATTERIES

– WARNING: Risk of explosive gas mixtures. Working in the vicinity of a lead-acid battery is dangerous. Batteries generate explosive gases during normal battery operation. For this reason, it is of utmost importance  that each time, before using your battery charger, you read this manual and follow the instructions exactly.
– Check that your batteries can be recharged with this charger. For this, refer to the manufacturer’s instruction manual of the battery.
– Make sure that the initial charging rate does not exceed the battery manufacturer’s specifications.
– Do not use batteries when charging!
– Non-rechargeable batteries must not be recharged.
– Never attempt to charge a frozen battery!
– Wear complete eye protection and suitable clothing to protect from contact with battery fluid. Avoid touching the eyes while working with a battery. Acid, acid particles or corrosion may get into the eyes.
– Remove personal metal items such as rings, bracelets, necklaces and watches when working with a lead-acid battery. Be extra cautious to reduce the risk of dropping a metal object onto the battery. This might cause sparks or short- circuit the battery or other electrical parts, and lead to an explosion or severe burns.
– Under certain conditions, some fluid may be ejected from the battery. Battery fluid can cause irritations and/or burns. Avoid any contact with it. In case of accidental contact, immediately rinse the spot with water. If fluid enters your eyes, immediately rinse the eyes with plenty of fresh water and contact a doctor.
– Worn-out batteries must be safely scrapped. Read the “Disposal of this product” chapter in this manual to learn more about recycling and environment protection.
– Observe the technical specifications of the batteries that you want to charge, along with the corresponding specific recommendations (for example: how to insert and connect the battery, charge rate, etc.).
– Do not recharge dry-cell batteries commonly used in household appliances. It may cause a fire and personal injuries.
– This appliance must be used exclusively on automotive car batteries with 12VDC voltage. Do not connect the appliance to other types of systems (6VDC, 24VDC, etc.).
– Removable power supply unit.
– CAUTION: When recharging the battery, use only the removable power unit supplied (WJG-Y131400900W charger’s reference) with the device.
– The device should only be used with the power supply unit supplied with the device.
– This device contains batteries that cannot be replaced.

| Complies with appropriate safety standards.
---|---
****| Warning! To reduce the risk of injury, the user must read the instruction manual.
| Do not dispose of electrical appliances with the household waste.
| A specific separate supply unit is required for connecting electrical quipment to mains power  supply.
| Li-ion Battery
| Keep out of rain

FEATURES

1. Jump-start port
2. USB QC3.0 output
3. 12V output
4. Charge input
5. LED light
6. Power switch| 7. Battery indicator
8. Jump-start plug
9. Red LED (Standby)
10. Green LED (Ready)
11. Yellow LED
12. SSC case| 13. Smart clamp
14. Type-C + Micro USB cable
15. Wall charger
16. Cigarette lighter adapter 12V/10A
17. Pouch
---|---|---

1. Female cigarette lighter plug: You can use this accessory to power most of 12V devices, such as GPS, DVD Player, fan, air compressor, vacuum cleaner or cooler box.
2. Wall charger: Norauto Micro Start comes with a 14V wall charger, which ensures fast recharge of your booster. Full recharge will take 4 to 5 hours.

IMPORTANT: For a better lifetime, we recommend recharging your jump starter to 100% every 3 months. After use, if the battery level is low, ALWAYS think of  echarging your jump starter before storage.

HOW TO JUMP START YOUR CAR

** WE STRONGLY SUGGEST TO VERIFY THE VOLTAGE OF THE CAR BATTERY IS 12V BEFORE STARTING. IF IT IS BELOW 2V OR ABOVE 12.6V, IT  AN’T BE JUMP STARTED.
WARNING:** When using this unit to start, make sure the positive and negative connections are correct, otherwise the battery mayexplode.
Press and hold the power switch (6) for 3 seconds to turn on the  unit. Make sure the battery levelis over 50%.

|
---|---

Follow the steps below for jump start, otherwise it could be dangerous:

1. Connect the black (-) clamp to the metal part of the engine (negative ground) or to thenegative battery terminal.
2. Insert the jump start plug (8) into the jump start port (1) of the device.
3. Connect the red (+) clamp to the positive (+) battery terminal.

After the engine is successfully started, first pull out the jump start plug (8) of the device and then remove the clamps from the car battery.
After the connection is completed, a green light (10) on the SSC case (12) will indicate the correct status to jump start. Start the car and do not crank over 5 seconds.

ADDITIONAL FUNCTION

Charge Phone QC3.0:

A USB port (2) compatible with QC3.0 fast charge technology is available on the side of the jump starter. Connect the USB cable to the USB output port of the device, press and hold the power switch (6) for 3 seconds to turn on the unit; the device will start to charge. The USB output will be automatically turned off after charging is completed.
Wall plug:

To recharge the device, firstly, connect the charging output port of the provided charger(reference WJG-Y131400900W) to the product input port, and then connect the charger plug to the 230V power supply. At this time, the LED will display the charging status. After fully charged, the LED will stop flashing.
12V output:

WARNING: This port is not a charging interface! It should not be connected to any other devices than  the female cigarette lighter adapter provided with this product.

1. Plug one end of the equipped cigarette lighter adapter into the product’s 12V 10A output.
2. Connect the 12V device to the other end of the cigarette lighter adapter cable.
3. Press and hold the power switch (6) for 3 seconds to turn on the unit to start supplying 12V 10A for the car.

LED Light:

Press and hold the power switch (6) for 3 seconds to turn on the unit.
– 1st short press: Working light
– 2nd short press: Flashlight,
– 3rd short press: Light Off.
Wireless phone charging:

Press and hold the power switch (6) for 3 seconds to turn on the unit. If your smartphone  is compatible with wireless charging technology, simply put your phone on the top   urface of the jump starter for quickand easy recharging.
2 Mins OFF:

The device will be turned off automatically if it is not be used within 2 minutes. Alternatively,  press and hold the power switch (6) for 3 seconds to turn off the unit.

TROUBLE SHOOTING

again to allow the unit to cool down.
2. Green – Yellow – Red LEDs light up together| Clamps incorrect attached.| Reverse the battery connections.
3. Green – Yellow – Red LEDs light up one by one| Using Battery level is too low to jump start.| Please recharge before use.
4. RED LED is on and no response after connecting well| Connected battery is below 2V or above 12.6V.| 1) Make sure your car battery is 12V.
2) Charge your car battery.
3) Remove all the loads (eg: heater, air conditioner, light etc) and try again.
5. Blue light “10%” and five lights flash alternatively| The temperature is lower than –25°C| Bring the unit to a warm environment
6. Blue light “25%” and five lights flash alternatively| The internal circuit is broken| Send the unit to the professional place for repair
7. Blue light “50%” and five lights flash alternatively| The unit temperature is below 10°C or higher than 45°C.| The booster can only be charged between 10°C and 45°C.
---|---|---
8. Blue light “75%” and five lights flash alternatively| Timeout for charging| The battery possibly goes bad and do not advise customer to use again
9. Blue light “100%” and five lights flash alternatively| The unit’s temperature is higher than 55°C| Bring the unit into a colder environment and wait until the unit to revocer to 40°C

CLEANING, MAINTENANCE AND STORAGE

A. Cleaning
WARNING! Do not use any abrasive or solvent-based cleaner. Do not immerse the appliance in water. Before cleaning, the appliance must be switched off, disconnected from mains and cooled down. From time to time, wipe the appliance with a dry and soft cloth.
B. Maintenance
No maintenance is necessary. The equipment is only to be repaired by qualified specialists.
C. Storage
This unit can be used under at temperatures between -20°C and +55°C, away from dust and water. We strongly recommend storing the product between 0°C and +40°C (in   ouse/truck etc.) before using the jump starter. For a better efficiency of the battery, it is  recommended to keep this unit indoors when outside temperatures are below 0°C.

DISPOSAL OF THE PRODUCT

Selective collection of waste electrical and electronic equipment.
Electrical equipment must not be disposed of with the household waste.
Pursuant to European Directive 2012/19/EU on waste electrical and electronic equipment, and its transposition into national law, waste electrical equipment must be  ollected separately and disposed of in designated collection points. Contact the local authorities or the retailer for advice on recycling.
DECLARATION OF CONFORMITY
Norauto, declares that the equipment type: 30856/2223449/ NO6740/01.39.300/Micro Start Booster is in compliance with Directive 2014/53/EU. The full text of the EU Ceclaration of Conformity is available at the following internet address: www.MGTS.com.
Norauto
511/589 rue des Seringats 59262 Sainghin-en-Mélantois France
Auto 5 Bld Paepsem 20 -1070 ANDERLECHT BELGIQUE  A.T.U Auto-Teile-Unger Handels GmbH & Co.KG,.

www.norauto.com
www.atu.eu
Made in P.R.C/Fabricado

References

• art.no
• ATU - Reifen und Autoteile online, Werkstatt-Services zum Bestpreis
• Produits de maintenance et d’équipement automobile - MGTS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>