Norauto NO7196 12V Inflator Instruction Manual
- June 10, 2024
- Norauto
Table of Contents
Norauto NO7196 12V Inflator
Product Information
The 12V Inflator is a compressor designed for inflating various objects such as tires, balls, and other inflatables. It is manufactured by MGTS Conception and is compliant with all applicable Union harmonization legislation, including Directive 2006/42/CE on machinery, Directive 2014/30/UE on the harmonisation of the laws of the Member States relating to electromagnetic compatibility, and Directive 2011/65/UE on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The product is also compliant with harmonized standards, including EN 1012-1: 2010, EN 60204-1: 2018, EN 61000-6-3:2007+A1:2011, EN 61000-6-1:2019, and EN 62321.
Product Usage Instructions
To use the 12V Inflator, follow these steps:
- Connect the inflator to a 12V DC power source.
- Select the appropriate nozzle for the object you want to inflate.
- Attach the nozzle to the inflator.
- Turn on the inflator.
- Inflate the object to the desired pressure.
- Turn off the inflator.
- Remove the nozzle from the inflator.
Note : Always refer to the user manual for specific instructions and safety precautions before using the 12V Inflator. Do not use the inflator for any purpose other than its intended use.
EU DECLARATION OF CONFORMITY
The manufacturer:
NORAUTO 511, rue des Seringats CS 70225 Sainghin en Mélantois 59262 Sainghin
en Mélantois, France represented its authorized representative MGTS CONCEPTION
395 Rue du Général de Gaulle 59700 Marcq en Baroeul, France represented by
Laurent Attardo, Global Sourcing and Purchasing Director, duly authorized to
compile the technical file and to draw up this declaration, declares that the
new machine hereafter
- Trade name : 12V INFLATOR
- Generic name : Compressor
- Function: Inflate ; Model : 03.95.020
- MGTS code : 33341 Norauto code: 2389387
- EAN code : 3501361317198
- Type: 12V
whose serial number is as follows : see page 1
fully complies with all applicable Union harmonisation legislation:
Directive 2006/42/CE on machinery,
- Directive 2014/30/UE on the harmonization of the laws of the Member States relating to electromagnetic compatibility,
- Directive 2011/65/UE on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
And harmonised standards:
- EN 1012-1: 2010
- EN 60204-1: 2018
- EN 61000-6-3:2007+A1:2011
- EN 61000-6-1:2019
- EN 62321
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Marcq en Baroeul, 18-oct.-2021
Laurent Attardo on behalf of MGTS Conception
FOREWORD
We thank you for choosing our product. It is designed for you according to the highest quality standards. Please read the operation manual carefully before using and operating the unit. Heed all warnings. If the device is passed on to another person, this manual must be handed over to the user along with it. Please keep this manual handy for future reference.
INTENDED USE
- This inflator is indented to use 12 volt DC only.
- This inflator is designed to inflate bike tyres, sports equipment, air mattresses, beach toys and other inflatables.
- This appliance is only intended for private use and is not suitable for professional operation.
- The manufacturer cannot be held liable for damage resulting from improper usage or incorrect operation or non-compliance with this manual.
SAFETY INSTRUCTIONS
WARNING! Please carefully read the manual included with this product. Misuse of the unit could cause property / equipment damage and / or personal injury.
- Do not operate the appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Prior to operation, inspect the appliance and its accessories for physical damage prior to each use. In case of any damage, dispose of the appliance.
- Regularly check the cigarette lighter plug and supply cord for damage. The supply cord cannot be replaced. If the supply cord is damaged the appliance should be scrapped.
- Do not over-inflate products beyond the manufacturer’s recommendations.
- Do not allow the inflator or its components to get wet.
- Do not operate the inflator in wet or damp areas.
- Use only in well ventilated areas.
- Keep the inflator away from flammable areas / liquids at all times.
- Do not leave the inflator unattended while in operation.
- After using, turn off the unit.
- Always disconnect power when not in use.
- Never allow children to handle and operate this inflator. Close supervision is necessary when this inflator is being used near children.
- The inflator is not a toy. Keep away from children and pets at all times.
- Do not use this inflator in extremely hot conditions.
- Do not use this product for other purpose than inflating. If you do so, personal injury can occur.
- Do not disassemble or tamper with this inflator.
- If the inflator emits abnormal sounds or overheats, turn it off immediately and let it cool off for minimum of 30 minutes.
- When operating the inflator do not run for more than 10 minutes of continuous use. Allow inflator to cool down for 10 minutes before re-using.
- Inspect inflator before each use. If cracked, broken, or damaged parts are found, qualified technicians should repair them.
- Never expose the inflator to rain, frost, or temperatures above 40°C or temperatures below – 30°C. When it is under 0°C, please warm up the product by running it without a load in order to protect the control system against being inoperative.
- Never use on people or animals.
- Make sure the cord is not exposed to hot objects, oil or sharp edges.
- Do not carry inflator by the air hose or power cord, damage may occur.
- Warning! For your own safety, you should only use accessories and parts specified in the instructions, or recommended for use by the manufacturer.
- Operate the inflator only with the accessories that are included.
- Warning! For vehicles, it is mandatory to check the tire pressure with a manometer homologated. Indeed, the manometer of the device, while being good quality, is not homologated and therefore NOT SUITABLE FOR INFLATING CAR TIRES.
- Warning! Do not connect to a 24 volt DC lighter socket.
PART LIST
- Working light
- Pressure gauge
- Valve cap storage tray
- On / Off switch
- Handle
- Cigarette lighter plug
- Air hose
- Bag
INFLATING FUNCTION
- Connect the 12V power cord into DC 12V power outlet.
- Screw the air hose to tire air valve by twisting it clockwise until it is securely attached to the tire air valve.
- The working light will be on once the power is connected.
- Press the On/Off switch to start inflating. Once you’ve reached the desired pressure, press the switch again to stop inflating.
- Remove the quick connector from the tire and screw the valve cap.
NOTE: The cables should be straight, net and in correct direction. If the
cable is stuck, do not wind. Try to pull it out and make the cable tidy and
wind again
ACCESSORIES USAGE REFERENCE
TECHNICAL SPECIFICATIONS
| Product name | 12V INFLATOR | Item no | 2389387-NO7196 |
|---|---|---|---|
| Working voltage | 12V DC | Performance | 0-2.0 BAR in 4′ 30″ |
| Max amperage | 10 A | Max pressure | 7 BAR / 100 PSI |
| Cylinder diameter | 19 mm | Weight | 0.92 kg |
| Maximum rotational shaft speed | 22000 rpm | Accessories | 3 |
inflation adapters, 10A fuse, one storage bag
Noice| LpA = 82 dB(A) KpA = 3 dB(A) ISO 2151:2008 LwA = 94 dB(A) KwA = 3
dB(A) ISO 2151:2008
CARE AND MAINTENANCE
- Keep the inflator clean and dry.
- To clean, use slightly damp cotton fabrics. Do not use acetone or abrasive cleaners.
- Always store in protective pouch bag to guard against damage.
- Do not submerge in water or other liquids. Do not store in a damp places and direct sunlight.
- Check the product and its accessories frequently before use. If the product does not work, check that the fuse is not damaged. If so, use the provided spare fuse to replace or purchase a new one.
FUSE REPLACEMENT
- Unscrew the cigarette lighter plug head and get the old fuse out.
- Replace the new fuse and screw the cigarette lighter plug head
EXPLANATION OF SYMBOLS
|
Refer to instruction manual
| |
Wear ear protection
---|---|---|---
|
Warning: Electricity
| **| Warning: Hot surface!** Contact may cause burns. Do not touch.
| ****
Guarantee sound power level 94dB
| ****
This product meets all the basic EU regulatory requirements relevant to it.
****| Selective collection of waste electrical and electronic equipment. Electrical equipment must not be disposed of with household waste.
Pursuant to European Directive 2012/19/EU on waste electrical and electronic equipment, and its transposition into national law, waste electrical equipment must be collected separately and disposed of in designated collection points. Contact the local authorities or the vendor for advice on recycling.
| |
NORAUTO 511/589 rue des Seringats 59262 Sainghin-en-Mélantois France
Distributed by
Norauto France 511/589 rue des Seringats 59262 Sainghin-en-Mélantois Auto 5
Bld Paepsem 20 -1070 ANDERLECHT BELGIQUE
A.T.U Auto-Teile-Unger Handels GmbH & Co.KG,
Dr.-Kilian-Str. 11, D-92637 Weiden i.d.OPf Deutschland
Norauto Italia SPA Corso Savona 85/10024 MONCALIERI
Norauto Portugal LDA Av. dos Cavaleiros, n°49 Alfragide 2794-057 CARNAXIDE
www.norauto.com
www.atu.eu
Made in P.R.C