Norauto PM7294 Charging Cable for Electric Vehicle Instruction Manual
- June 5, 2024
- Norauto
Table of Contents
Norauto PM7294 Charging Cable for Electric Vehicle
FOREWORD
Thank you for purchasing and using our products. Before using the charging
gun, please read and follow the instructions to use this product;
PRECAUTIONS
- It is forbidden to disassemble, modify, knock or throw this product by yourself. If there is a problem with the product, please contact your dealer;
- It is forbidden to use the product under abnormal conditions (such as swelling, liquid leakage, burnt smell, etc.);
- It is forbidden to put the product in microwave ovens, ovens, high-pressure containers, and vacuum chambers;
- It is forbidden to put this product in water or flush it for cleaning;
- This product is not a toy, please keep it away from children’s reach when storing;
- The plug must not be in contact with water or heat sources;
- Before and after each use, check whether the surface of the charging gun is damaged and whether the cable is broken;
- When cleaning the charging gun, wipe it with a cloth. The tip of the gun should not be washed in water, and it should not be wiped with organic solvents.
PRODUCT PACKAGING
PRODUCT FEATURE DIAGRAM
CHARGING YOUR VEHICLE
The higher temperature of the electronic products during the charging process is normal. If it is not abnormal, don’t worry, but pay attention to the choice of the charging environment. Do not charge in a high temperature environment;
- It is forbidden to charge in dangerous places such as gas stations, filling stations, and places marked with no fire;
- It is forbidden to charge in a closed car, high temperature place, high humidity and humid environment under outdoor sunshine;
- When charging, the charging cable must be fully extended, and the charging cable must not be knotted;
- The charging cable must not be used with extension cords or similar types of charging cables;
- After use, roll up the cable neatly and place the cap (included) on the plug to avoid kinking the cable;
- Improper use of the charging cable can cause short circuits and serious injuries, and negligence can cause life-threatening electric shocks;
-
Make sure the vehicle is in park and is turned off.
Make sure the power of the charging pile is turned on, if not, please turn on the power of the charging pile first; -
Remove the protective cover of the charging gun tip of the adapting charging pile, and insert the tip of the gun into the output interface of the charging pile until it is fully inserted, indicating that the power supply of the charging gun has been connected;
-
Insert the charging coupler at the other end of the charging gun into the charging socket of the vehicle, and until the charging gun head is fully inserted, the car shows that it is charging, indicating that the power is turned on;
-
When charging is complete, pull out the two charging plug heads in order.
APPLY TO
Nissan LEAF | Nissan eNV-2000 | VW eGolf Chevy Volt |
---|---|---|
Chevy Bolt | Chevy Spark Toyota Prius Plug-In | Prius Prime |
Toyota Rav4 EV Hyundai Ioniq | Kia Soul EV | Mercedes B Class Electric Drive |
BMW i3 and i8 Ford Focus Electric | Ford C-Max Energy | Ford Fusion Energy |
Fiat 500e ZERO motorcycle | Brammo motorcycle | Smart Electric Drive |
Karma Fisker | Mitsubishi iMiev | Cadillac ELR Porsche Cayenne S-E |
Porsche Panamera S-E | Honda Accord Plug-In Hybrid | Honda Fit EV |
More Other Models…. |
WARNING:
For the unmarked car brands above, please refer to the specifications of the charging gun and the car model of the corresponding car brand.
TOXIC AND HARMFUL SUBSTANCES
Composition and quantity of toxic and hazardous substances in energy storage power supply
Part Name| Harmful Substance
Pb| Hg| Cd| Cr(Vi)| PBB| PBDE
Circuit Board| X| O| O| O| O| O
Shell| O| O| O| O| O| O
Cable| O| O| O| O| O| O
This form is compiled in accordance with SJ/T11364:
O: Indicates that the hazardous substances of all homogeneous materials are below the MCV limit specified in the standard 2002/95/EC (RoHs).
X: Indicates that the hazardous substances of all homogeneous materials are higher than the MCV limit specified in the standard 2002/95/EC (RoHs).
SPECIFICATIONS
Model: | 2291770 – PM7294 (SK-ECW2 16A-3P) |
---|---|
Charging Standard: | IEC62196-2 |
Charging Mode: | Mode 2 |
Rated Voltage: | 480V AC |
Rated Current: | 16A |
Insulation Resistance: | >1000M0, DC500V |
Contact Impedance: | 0.5M0 Max |
Withstand voltage: | 2000V |
Fireproof grade of rubber shell: | UL94V-0 |
Mechanical life: | unloaded plugged >10000 |
Waterproof grade: | IP55(mating) |
Plastic shell: | thermoplastic plastic |
Conductor: | copper alloy, silver plated surface |
Working environment temperature: | -30°C – 50°C |
--- | --- |
Terminal temperature rise true: | <50K |
Insertion and Extraction Force: | <100N |
Cable specification: | 5G2.5mm 2 + 1*0.5mm 2 |
Cable length: | 5m |
| ****
This product meets all the basic EU regulatory requirements relevant to it.
---|---
| Selective collection of waste electrical and electronic equipment. Electrical equipment must not be disposed of with household waste. Pursuant to European Directive 2012/19/EU on waste electrical and electronic equipment, and its transposition into national law, waste electrical equipment must be collected separately and disposed of in d esignated collection points. Contact the local authorities or the vendor for advice on recycling.