Xblitz Smart Car Holder User Manual
- June 3, 2024
- Xblitz
Table of Contents
Xblitz Smart Car Holder
DESCRIPTION
CAR HOLDER
Before use, carefully read the enclosed operating instructions and safety
notes to avoid accidental damage to the equipment or unintentional injury.
PURPOSE OF PRODUCT
The device is a smartphone holder designed for use in cars. The holder has a
built-in wireless charger and an automatic smartphone fastening system.
KIT
- Smart car grip
- User Manual
- Telescopic car window mount
- Mounting for car air vent
- USB type C cable
- Grip pad
PRODUCT DESCRIPTION
- SEE FIGS. A & B
- Wireless charger 2.
- Handle arms
- LED indicator
- Button to open the arms
- Adjustable stand
- USB Type C Port
MOUNTING
SEE FIGURE C
- Connect the car grip to one of the mounts.
- Mount your device in the desired location.
- CAR VENTILATION CARTRIDGE MOUNTING Press the clip on the holder and place it on the car air vent.
- Windshield/dashboard mount- Place the suction cup on the windshield/ dashboard of the car and pull the lever to make the holder stick to the wind- shield/dashboard and hold the device in place.
- Connect the holder to the power supply using a USB type C cable
- LED Operation: white (power connected), blue (charging), red (error).
OPERATION
- The device has an electrical system to open and close the smartphone holder arms with a sensor to automate this process.
- To open the arms of the holder, press the side button, the arms should open. Once the smartphone is inserted, the retaining arms should clamp onto the phone.
- To open the arms and remove the smartphone press the button on the side of the device.
- Additionally, the mount has a built-in wireless charger. The smartphone (which supports this technology), when inserted into the holder, will be automatically charged.
NOTE! The manufacturer does not guarantee compatibility of the car grip
with every type of car.
NOTE! The manufacturer does not guarantee the compatibility of the
charger with all types of smartphones. To operate the car grip along with
wireless charging, connect the holder to an external power source using the
included USB Type C cable.
Incorrect charging of the phone can be caused by:
- Using an unsuitable cable.
- Not connecting the device to a suitable power source.
- The phone case is too thick (more than 2mm).
- The phone is not properly positioned in the holder.
- Metal or magnetic objects are attached to the back of the phone.
- Wireless charging is not supported by this phone model.
NOTES
- Damage caused by not following these instructions will void the warranty.
- In case of damage caused by improper use and non-observance of safety rules, the manufacturer is not responsible.
- For safety reasons, it is not allowed to make any changes or modifications to the product.
- Check the device regularly for damage. If any damage is found, contact an authorized service center.
- Do not spill liquids on the product as this may cause permanent damage and also pose a high risk of fire.
- Keep the device out of the reach of children.
- If you feel the device is overheating, unplug it from the power outlet and contact an authorized service center.
- Do not connect the device to power sources with higher voltage than recommended by the manufacturer (especially directly to 220/230V outlet). Failure to do so may result in damage or, in extreme cases, ignition of the unit.
SPECIFICATION
- Working power: 5W, 7.5W, 10W, 15W max
- Input: 5V/2A, 9V/2A
- Output: 5V/1A, 9V/1.2A, 9V/1.67A
- Power Port: USB-C
- Overvoltage/overheat protection: Yes
- Charging efficiency: 7o%~75%
- Operating temperature: -2045°C
- Weight: 179g
- Size (without handle): 117x72x42mm
- Arm size (max): 82mm
WARRANTY CARD/ COMPLAINTS
The product is covered by a 24-month warranty. Warranty conditions can be
found at: https://xblitz.pl/warranty/
Complaints should be submitted using the complaint form found at:
http://reklamacje.kgktrade.pl/V
Details, contact and service address can be found at: www.xblitz.pl.
Specifications and contents are subject to change without notice. We apologize
for any inconvenience.
KGK Trade declares that the XBLITZ SMART device complies with the essential
requirements of Directive 2014/53/EU. The text of the declaration can be found
at the link:
https://xblitz.pl/download/DOC/deklaracja-CE-Xblitz-SMART.pdf
The crossed-out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive(2012/19/ accumulators (2006/66/ EC). Proper disposal of the device prevents degradation Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area EU) and the Directive on batteries and of the natural environment.
Manufacturer:
KGK Trade sp. z o.o. sp. k.
Ujastek 5b
31-752 Cracow
Poland
Made in PRC
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>