Xblitz BEAST RED Wireless Bluetooth Headphone User Manual
- June 3, 2024
- Xblitz
Table of Contents
Xblitz BEAST RED Wireless Bluetooth Headphone
Dear Customer,
thank you for purchasing Xblitz BEAST RED. The product you received is a set
of wireless headphones. Please read the manual carefully before use.
DEVICE DESCRIPTION
- . Padded headband
- Volume + / Next track
- Play/ Pause/ Phone
- Volume- / Previous track
- ON/ OFF switch
- AUX port
- LED light
- Built-in microphone
- Micro USB charging port
TURNING ON AND OFF
Before switching headphones on for the first time, connect the device to
charging for 3 hours to ensure long battery lifespan.
Turning ON: Turn the ON/ OFF switch to ON position. You should hear a
voice saying “Power on” from the headphones. The LED will start flashing blue.
Turning OFF: Set the ON/ OFF switch to OFF.
PAIRING THE DEVICE
- Keep the headphones up to 1 meter away from the paired device (e.g. phone) while pairing.
- Turn on the device. Wait until you head “Bluetooth device ready to pair” from your headphones. The LED will start flashing red and blue.
- In the Bluetooth settings of the paired device, turn on Bluetooth device search. Select Xblitz Beast Red from the list of available devices.
- If your device asks you for a password or PIN, type “0000”
- If your device asks you to confirm the pairing, select YES
- If the pairing has been finished correctly, the LEDs on the headphones will stop blinking.
- The headphones can be paired with two Bluetooth devices at the same time.
CHARGING
- The headphones set has a built-in battery. Before using the battery for the first time, we recommend that you fully charge the battery (approx. 2-3 hours of charging).
- Connect the headphones to the charger using a micro USB cable.
- When the device is charging, the LED will light up red.
The LED will turn o when the device is fully charged.
BUTTONS
-
When you’re listening to music, you can do the following:
a. Increase volume: press the + button
b. Reduce volume: press the – button
c. Next track: hold the + button
d. Previous track: hold the – button
e. Pause: press Play/ Pause/ Phone
f. Resume: press Play/ Pause/ Phone -
The headphones have a built-in microphone that allows you to answer and reject incoming phone calls:
a. Answer a call: press Play/ Pause/ Phone
b. Reject call: double-tap Play/ Pause/ Phone
c. End the current call: press Play/ Pause/ Phone
d. Redial last number: press and hold the Play/ Pause/ Phone button
AUX/ BLUETOOTH MODES
- When you connect an AUX cable to your headphones, the device goes into battery-saving mode. To turn Bluetooth mode back on, unplug the AUX cable and reset the device.
- AUX MODE
Connect the AUX cable to the AUX port of the headphones. Connect the other end of the cable to your device (such as your phone) and start playing music from it.
SAFETY MEASURES
- Do not listen to loud music for a long time, this can damage your sense of hearing.
- Keep the device away from children.
- Keep the device away from the water. Avoid situations in which headphones can be flooded with liquids.
- If you feel unwell when using headphones (e.g. your head starts to hurt), stop using the device immediately.
- Do not store the device in temperatures below -15 degrees Celsius or above 55 degrees Celsius. These conditions reduce the lifespan of the headphones and the built-in battery.
SPECIFICATION
Bluetooth version: v4.2
Bluetooth chip : JL
Working range: Up to 10m
Battery capacity: Lithium ion 400mAh
Drivers: 40mm
Sensitivity: 110±3db
Impedance: 64Ω
Talk time: Up to 10 h
Charging time: 2.5 h
Standby time: 200 h
WARRANTY/ CLAIMS
This product is covered by a 24-month warranty. The warranty conditions are
available on the website: https://xblitz.pl/warranty/ Complaints should be
submitted with the complaint form which can be found at
http://reklamacje.kgktrade.pl/
Contact details and the address of the service can be found on the website:
www.xblitz.pl KGK Trade declares that this device
Xblitz Beast Red is compliant with significant requirements of directive
2014/53/EU. The text of this declaration may be found on the website:
https://xblitz.pl/download/DOC/deklaracja-CE-Xblitz-beastred.pdf
The crossed out trash can symbol indicates that unusable A electrical or electronic devices, its accessories (such as power – supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19 / EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.
Manufacturer:
KGK TRADE sp. z o.o. sp. k.
Ujastek 5B,
31-752 Cracow, Poland