Xblitz GO SE Driving Recorder Video Camera User Manual

User’s manual in English lanugage
User Manual

GO SE Driving Recorder Video Camera

BEFORE FIRST USE

1. It is recommended to use brand microSD memory cards class 10th (8GB – 64GB capacity).
2. Before insertting the card into the car camera it is recommended to format it to the FAT32 file format in the PC, and than in the recorder.
3. Memory card should be installed when the device is turned o, otherwise the memory card and the device may be damaged. The same refers to putting the memory card out of the device.
4. The internal battery allows for recording without the power supply for no longer than 5 minutes.
5. When the memory card is full, the odlest, unprotected files will be overwritten.
6. It is recommended to use the product’s features with their intended use, e.g. Motion detection or parking mode during driving should be turned o, as it may cause automatic turning on / o. during the stay at the tra lights.
7. It is recommended to use the G-sensor feature at the minimum level so not to protect unnecessary files and lose space on the memory card. The memory card should be formatted into the FAT32 file format into the PC, and than in the recorder.
8. Sound: the device has a capacitive microphone, which records all the sounds from the surrounding. The sounds may overlap causing distortions.

THE SET CONTAINS

CAMERA INSTALLATION

1. Select and clean up the place destinated for the camera installation.
2. Mount the camera grip.
3. Route the power cable.
4. Insert the power adapter into the cigarette lighter socket.
5. Insert the memory card into the camera.
6. Attach the camera to the grip.

GETTING STARTED

1. Mount and connect the camera into the power adapter.

2. Insert (already formatted into the FAT32 file format) microSD memory card.
   NOTE: the memory card should be putted in /out only when the device is o.

3. Set in the menu:
   a. Date & time
   b. Loop recording (adjust the length of the recordings). If you turn loop recording o, the files will not be overwritten.
   c. Set the highest available resolution.
   d. Set the G-Sensor on minimal possible sensitivity so the camera does not detect road inequalities and protects unnecessary videos.
   e. Turn WDR on.

4. Make sure that the motion detection and parking mode are turned o. If these functions stay on during normal usage, they will negatively aect the recordings. Turning these functions on is recommended only when the vehicle is parked.

5. Camera will automatically start to record every time we turn the ignition on (unless there is no constant power supply in the car cigarette lighter socket of your vehicle).

MAIN FEATURES

• Adopting 170° view angle lens
• Supporting FHD1080P HD image
• Adopting advanced H.264 video compression technique
• 2.0 inch HD LCD
• Supporting HD image transmission
• G-sensor supported
• Seamless loop recording, no data missed
• Can be turned on automatically and starting recording when car starts
• Auto loop recording, recroding time can be set to each file
• Image can be monitored during driving, supporting spot playback
• Improve date/time display, no need to reset when restarting
• One key to lock the file
• One key to turn o
• Charging by USB port
• Attached with special suction mount, easy to install
• Max support 64GB TF card

PRODUCT DESCRIPTION

1. AV out
2. Reset button
3. Power button
4. microSD card slot
5. Menu button| 6. LED indicator
7. LCD screen
8. Mode button
9. Down button
10. Up button| 11. OK button
12. USB port
13. Microphone
14. HDMI port
15. Lens
---|---|---

KEY FUNCTIONS

• Menu Key
  Short press to enter menu setting; continuous short press to switch the settings; to lock the current file if short pressing the key during recording.

• Up Key
  In the menu setting options, press Up key to select functions; in the standby or recording mode, press Up key to zoom in.

• OK. Button
  Confirm button for recording video and taking photo.
  In the recording mode, short press OK to start recording, and short press again to stop recording. In the photo mode, short press OK to take a photo. In the menu setting state, press OK to confirm the option.

• Down Key
  In the menu setting options, press Down key to select functions; in the standby mode, short press the key to turn on/o short press the key to zoom out after zooming in.

• Mode Key
  Short press the key to switch the modes among recording, photo and playback.

• HDMI
  HD output port

• TFT Card Slot
  Memory card slot

• USB
  Used for charging by external power source or for working power supply.

• Reset
  Reset button when the unit crashes.

• Power Key
  Long press the key to turn on/o

• Power Indicator
  The indicator will turn on when power on

• Charging Indicator:
  Connected with USB cable, the indicator being on means charging, and being oy full charged.

• MIC
  Audio receiver

SPECIAL FUNCTIONS DESCRIPTION

1. G-sensor
   When the sensor is on in the moment of collision, the file is automatically protected from being overwritten. It is recommended to set the lowest possible value (low or medium) so the camera does not detect road inequalities.

2. Auto on/o
   Supports to turn on and start recording automatically when car starts after vehicle power supply connected and auto turn o and save the videos after car shuts down.

3. Loop recording
   The dashcam divides the recordings according to the selected time. You can choose the length of the files. When the memory card becomes full, the oldest recording will be overwritten.

4. Parking mode
   When this function is turned on, the camera left in the car and plugged into the power supply detects shakes of the vehicle (e.g. during parking collision), it turns itself on and starts to record.

INSTRUCTION

1. Start and Shutdown
   Long press the power key to start up the unit, and the yellow indicator will light up. Long press the power key again to turn o and the yellow indicator will go out.
   Attention: the unit will remind low power when the power is low then turn o.

2. Recording Mode
   Short press Mode key to switch the unit to the recording mode, there is a dv icon on the top left corner of the LCD. And then short press the OK button to start recording, the DV icon and the recording indicator will flicker, which means the unit is recording.

3. Photo Mode
   Short press Mode key to switch the unit to the photo mode, there is a camera icon on the top left corner of the LCD. Short press OK button to take a photo and the LCD will flicker once, which means photo shoot finished.

4. Video/Photo Playback
   Short press Mode key to switch the unit to the photo mode, there is a playback icon on the top left corner of the LCD. Short press the Up key to select upward files; Short press the Down key to select downward files; Short press the OK key to play back the video file selected.

5. Menu Settings 21
   Short press the Menu key to tune out the setting menu. Short press Up or Down key to select the options circularly up and down. Press OK to enter into the selection if any option needs setting.

6. Exit setting menu
   Short press Menu key to exit the setting state.

7. Time Setting
   Continuously to short press the menu key to enter into the setting menu. Short press the Down key to the date settting, then to short press the OK button to switch the setting among Year/Month/Date /Hour/Miniute/Second. Adjust the values by pressing up/down key. Finally press the OK button to confirm the adjustment.

BATTERY

Battery power levels:

There’re 4 ways to charge the battery. And the red indicator will light up during charging. It will take about 60mins to charge 22 the battery fully. The red indicator will turn o.

1. To charge the battery by the power adapter
2. To charge the battery by PC-USB
3. To charge the battery by vehicle power supply
4. To charge the battery by DC

Remarks: When the product crashes during using caused by improper operation, to reboot the product by removing the battery or resetting the product.

NOTE: Only use chargers with a charging current up to 5V/ 1.5 A. (Do not connect directly to the 220 / 230V socket). Failure to follow the instructions may cause damage cameras or, in extreme cases, lighting up the device.

TECHNICAL SPECIFICATION

NOTE: Playing files on a computer: The camcorder does not have a mass memory mode. To play files on the computer, remove the memory card from the camera and connect using a computer reader.

FAQ

1. Can’t take a photo or not record a video.****

– Please check if the TF card is full or locked.

2. The device auto stop when recording****

– Please use the high speed card compatible with SDHC, which is marked with C4 or C6, since the HD video data is huge.

3. “ File Error” occurs when playback the videos and photos.****

– It’s because something goes wrong when the TF card saves the files, which makes the files incomplete. Please use the “Format” function on the DVR to format the TF card.

4. Hazy image taken by the DVR.****

– Please check if there’s some dirt or finger print on the lens.
– Please clean the lens with soft cloth before using.

5. The image is dark when shooting some scenes, the sky, water, etc.****

– When the scenes are with big contrast, the auto exposure will be aected. Please adjust the EV value.

6. The color performs not good enough in cloudy day or indoors.****

– Please check if the “White Balance” set to Auto on the menu.

7. There’s cross stripe on the image.****

– This is because the “Frequency” is set wrong. Please set the frequency to “50Hz” or “60Hz” according to the local value.

8. Crash.****

– Please short press the Reset to restore the device.

WARRANTY / CLAIMS

This product is covered by a 24-month warranty. The warranty conditions are available on the website: https://xblitz.pl/warranty/
Complaints should be submitted with the complaint form which can be found at http://reklamacje.kgktrade.pl/
Contact details and the address of the service can be found on the website: www.xblitz.pl

Specifications and contents of the kit are subject to change without notice, We apologise for any inconvenience.
Xblitz logo is a registered trademark.

Manufacturer:
KGK Trade sp. z o.o. sp. k.
Os. Urocze 12
31-953 Cracow
Poland
Made in P.R.C.

The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19 / EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

References

• System reklamacyjny KGK Trend
• Warranty - Xblitz.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>