xblitz BEAST PLUS Wireless Headphones User Manual
- June 3, 2024
- Xblitz
Table of Contents
xblitz BEAST PLUS Wireless Headphones
Dear Customer,
thank you for purchasing Xblitz BEAST PLUS. The Product you received is a set
of wireless headphones, used to listen to music from any device that supports
this technology.
Before using the device, please read the instructions.
PRECAUTIONS
- Pay attention to the volume level when you’re listening to music using your headphones. Listening to loud music for too long can cause permanent hearing damage.
- If any side e acts occur (e.g. Headache), immediately stop using the device.
- Avoid listening to music and making phone calls using headphones while driving.
- Store the device and its accessories away from children.
- Store the device away from water sources, as well as places with high humidity. Do not use the device if it is wet to avoid electric shock as well as damaging the device.
- Avoid increasing the volume to a level where you won’t hear your surroundings.
- The storage temperature of the device is from -5°C to 40°C. Do not expose the device to extremely high or low temperatures, as this may damage the battery.
- Do not attempt to open or disassemble the device.
- Keep the device away from heat sources, sunlight, moisture, water and other liquids.
- Do not use the device if it has been dropped from a high altitude or destroyed in any other way.
- Repairs of electrical equipment should be carried out by a qualified specialist. Improperly carried out repairs can put you at serious risk.
- Use the device only for its intended purpose.
- Use only 5V chargers (Do not connect directly to the 220/230V outlet.) Failure to follow the recommendations can cause damage or, in extreme cases, set the device on fire.
- If you do not intend to use the device for a long period of time, make sure that it will be charged at least once every six months to avoid damage to the built-in battery.
PRODUCT DESCRIPTION
- Headband with soft hem
- + Button (volume boost/ next track)
- – Button (volume down/ previous track)
- Power button
- LED
- Micro USB port (charging)
- AUX port
- Microphone
USING THE DEVICE
- On/ O : hold down the power button for 5 seconds. You should hear the “Power On” message when you turn the device on and “Power O ” successfully when you turn it o .
- Play/ Pause music: press the power button.
- Volume control: press the “+” button to increase the volume by one degree. Press the “-” button to reduce the volume by one degree.
- Select a song: press and hold the “+” or “-” button to move to the next/previous song.
- Smart Assistant: hold down the power button for 3 seconds (until you hear a short signal) to turn on the smart assistant (e.g. Siri or Google Asist) on your phone.
- Answer a phone call: press the power button.
- Reject a phone call: press the power button twice.
- End the phone call: press the power button while the call is in progress.
- AUX cable connection: connect one end of the AUX cable to the port on the headphones and the other to the device from which the sound will be played.
CHARGING HEADPHONES
-
When the battery is low, the headphones will inform you by voice message about the need to connect it to the charger.
-
Turn o the device.
-
Connect the headphones with a micro USB cable to your computer, power bank, charger, or another power device with a DC 5V 0.5-2A charging current.
NOTE: Do not connect to higher current source, in particular directly to 220/230V power sockets. It can cause damage or even set the headphones on fire. -
When charging, the LED will turn red (Charging takes about 2.5 hours and allows you to use the device for about 6 hours).
When you charge your headphones, you may have problems connecting and using
them. It is recommended that you do not use headphones that are connected to
power.
When watching videos on your smartphone (tablet, laptop, etc.), there can be a
small delay between the sound and what you see on the screen.
PAIRING WITH BLUETOOTH DEVICES (E.G. SMARTPHONE, TABLET)
- Turn on the headphones. If they are not paired with any device, the LED should alternate between blue and red when pairing mode is on. If pairing mode is not on, hold down the power button for 3 seconds to turn it on.
- Turn on Bluetooth on the device you want to pair.
- In the list of available devices, find Xblitz Beast Plus and select it. If your device asks for a password, type 0000.
- After successfully pairing, you will hear a message from the headphones.
- Once paired, headphones will be remembered by the device to which they were connected. The headphones will connect to your device whenever they turn on, unless they are out of Bluetooth range.
- The headphones can be paired with two devices at the same time. To pair the second device, turn Bluetooth o on the first device and configure the Bluetooth connection on the second one.
FAQ
-
Why can’t I connect my headphones to my phone?
Make sure the headset is in pairing mode. Make sure Bluetooth connectivity is turned on on your phone. Remove the headphones from the list of devices that you see on your phone and try pairing again. -
Why can’t I turn on my headphones?
Check the battery status. -
Can I replace the headphone’s battery?
No, these headphones uses a non-replaceable, built-in lithium-polymer battery. -
Why does the headset break the connection with my phone even though i keep the distance between devices below 10 meters?
Check that there is no metal barrier between the devices that can cause interference. Bluetooth is a radio technology that is sensitive to various types of objects near connected devices. -
Why can’t I hear audio from a computer/ phone paired with my headphones?
Check if the audio output you selected on your computer
is a Bluetooth device and that your computer supports the A2DP profile. Also check the volume level. -
Why can’t I control the volume/selection of songs on my phone from my headphones?
Settings for the music playback app you’re using on your phone may prevent you from controlling music playback with your headphones.
Specification
WARRANTY/ CLAIMS
This product is covered by a 24-month warranty. The warranty conditions are
available on the website: https://xblitz.pl/warranty/
Complaints should be submitted with the complaint form which can be found at
http://reklamacje.kgktrade.pl/
Contact details and the address of the service can be found on the website:
www.xblitz.pl
KGK Trade declares that this device XBLITZ BEAST PLUS is compliant with
significant requirements of directive 2014/53/EU. The text of this declaration
may be found on the website: https://xblitz.pl/download/DOC/deklaracja-CE-
Xblitz-beastplus.pdf