xblitz S3 Duo Recordings Day Night Car Camera User Manual

xblitz S3 Duo Recordings Day Night Car Camera

Dear Customer,
Thank you for purchasing the Xblitz S3 Duo car camera! The device you purchased is a video recorder that comes with an additional rearview camera. The camera is designed for use in cars and is used to record the route of the vehicle. Before using this device, we advise reading the following instructions.

BEFORE USE

1. It is recommended to use branded class 10 SD cards (capacity ranging from 8 to 32GB).
2. Before inserting the memory card into the recorder, the card must be formatted to the FAT32 file system on your computer as well as on the recording device.
3. Only insert the memory card into the device when the device is turned off. Inserting the memory card in the switched-on recorder may damage both the card and the device. This also applies when removing the card from the device.
4. Menu Setup Recommendations:
   • Date and time.
   • Loop recording (adjust the recording time). If you disable loop recording, the files will not be overwritten.
   • Set to the highest available resolution.
   • Set the G-Sensor to the lowest possible sensitivity so that the camera does not pick up road irregularities and protects the recordings unnecessarily.
   • Enable HDR mode.
5. The oldest unprotected recordings and files on the memory card will be overwritten when the memory card becomes full.
6. The device functions should only be used for their intended purposes. Do not activate the motion detection or parking mode functions while driving. This may result in the device turning on or o automatically.
7. The device has a condenser microphone that records all ambient sounds. These recorded sounds may overlap with one another causing them to be distorted. 8. The device has a built-in super capacitor and will only work if it is connected to an external power source.

KIT CONTENT

1. Xblitz S3 Duo Dashboard Camera
2. Rearview Camera
3. Micro SD Memory Card Reader
4. Suction Cup Mounting Bracket
5. Charger
6. USB cable
7. AV cable (for connecting the rearview camera)
8. Instructions

PRODUCT DESCRIPTION

1. Menu/Mode button
2. UP button
3. DOWN button
4. POWER / RECORD button
5. Loudspeaker
6. Lens
7. Micro SD memory card slot
8. AV port (for connecting a rearview camera)
9. Mini USB port
10. RESET button 1
11. 360° adjustable handle

MOUNTING YOUR CAMERA

1. Select a place to mount the camera. It is best to set the camera so that the display preview shows the largest possible area in front of the car. Make sure the camera does not obstruct the driver’s view while driving.
2. Stick the mounting bracket to the windshield of the vehicle then mount the camera on it.
3. Run the power cable to the device as shown in the image above.
4. Route the cable for the rearview camera and connect it to the camera.
5. Connect the mini USB cable to the camera and insert the charger into the 12 / 24V cigarette lighter socket.

The place of installation for the additional rearview camera included in the set is your personal choice. The camera meets the IP67 waterproof standards (resistant to all weather conditions).

• Connecting The Rearview Camera: The cable of the rearview camera should be connected to the AV port, which is located on the housing of the main video recorder. Make sure the main device can see the secondary camera (if not, check the camera settings in the main menu or check if the camera cables are properly installed).
• Connecting The Rear Camera: The cables coming from the rear camera should be connected to the cables supplying the reverse gear lamp. Connecting the wires this way will enable the reversing function to be activated. The external installation of the wire will need to be well insulated and should not be overstretched.
  • Caution! Attach the rear camera with the mounting foot facing up. Mounting with screws or double-sided tape.
  • Caution! The camera recordings will be recorded as mirror images of the initial camera view.

KEY DESCRIPTION

1. POWER
   A quick push on this button will turn the display panel on and off . To turn the device on or o , the key needs to be pushed in and held for 3 seconds.

2. MENU/MODE
   Holding this key for longer will open the context menu (as long as the camera is not recording at the same time). A longer press without holding the button will allow you to switch between the video/photo modes and file browsing. In MENU and viewing mode, it functions as a back button. A short press of the button during recording in video mode protects the currently recorded file from being overwritten.

3. DOWN
   This button allows you to navigate through any saved files found on the inserted memory card as well as the device menu. When playing a video file, this button will also activate the sound adjustment function by muting the video.

4. UP
   While in the file browsing function, this button switches between the saved files on the current memory card. In the menu, pushing the button will change the currently selected item. In video recording mode, the button is used to switch audio recording on or off.

5. RESET
   Pushing the reset button will reset the whole device and restore it to the default factory setting.

DEVICE FUNCTIONS

1. Dual Camera – Allows you to disable or enable recording by the rearview camera.
2. Loop recording – Allows you to set the maximum length of recorded files.
3. HDR – Allows you to enable a high dynamic range.
4. Exposure – Allows you to adjust the sensitivity of the lens to light.
5. Motion detection – Enables/disables the motion detection mode. This mode detects vehicle vibrations (e.g. during a crash or sudden braking) and prevents the recording from being overwritten.
6. Recording – Enables/disables sound recording.
7. Date Stamp – Enables/disables displaying the date on the recording or photo.
8. Gravity Sensor (G – Sensor) – Sets the sensitivity of the gravity sensor. This sensor detects vehicle vibrations (e.g. during a crash or sudden braking) and protects the event recording against overwriting.
9. Car Number – Allows you to enable/disable displaying the number of license plates on recordings.

PRECAUTIONS

1. Do not disassemble or tamper with the camera by yourself. In the event of a failure, contact the service center.
2. Use only original accessories.
3. Use only the original charger included in the set. Using a different power adapter may adversely affect the performance of the battery.
4. The device may not be used in violation of the laws of a given country or region.
5. The permissible operating temperature of the device is 0 °C – 35 °C, storage: 5 °C – 45 °C.
6. Do not expose the device to damage and physical impact.
7. Keep the product clean, especially the lens. Do not use detergents or chemicals when cleaning.
8. Clean only when the device is disconnected from the power supply.
9. Keep the device out of the reach of children.
10. Do not expose the device to very high temperatures and fire.

FAQ

1. The device does not turn on, the screen flashes:
   Connect and charge the device before starting it to ensure the battery is fully charged.

2. The device does not turn On/Off automatically:
   The reason for this may be caused by the power supply in the cigarette lighter socket not being constant.

3. The device restarts while driving:
   It is recommended to check the power source that the device is connected to.

4. The device does not record in Loop (records randomly):
   Check the setting of the functions selected on the device (motion detection “and” parking mode “- both should be turned o while driving).

5. The device shows the message “card full”:
   Check the “G – Sensor” and “Parking Mode” functions and set them to the minimum. The card should be formatted in the FAT32 format first on a computer, and then on the dashcam.

6. The device records noise, distorted, or unclear sound:
   The device has a very sensitive microphone that records all ambient sounds from the surroundings. Recorded sounds may overlap. Windshield airflow can also distort the sound.

7. The device is not responding:
   Briefly press the Reset button or restore the device to factory settings.

8. Recording displays distorted lines:
   This may be caused by the refresh rate of the image setting being incorrect. Set the frequency value to “50Hz” or “60Hz” depending on your local settings.
   Due to the continuous improvement of products, the manufacturer reserves the right to change the device and its set without prior notice. Some functions described in this manual may be slightly di erent from the actual.
   WARNING! Only use the original 5V charger. Do not connect directly to a 220/230V socket. Not following the given instructions may lead to damage to your device and/ or hazardous situations.

ATTENTION! Playing files on a computer: The camera does not have a mass storage mode. To play files on a computer, remove the memory card from the camera and connect it to the computer via a reader.

SPECIFICATIONS

• Processor: JL5603
• Video Resolution: 1920×1080 / rearview camera: VGA 640×480
• Sensor: SC2368
• Memory: Micro SD car dup to 32 GB class 10
• USB: Mini USB
• Microphone/Speaker: Built-in
• Display: 2.45 -inch
• Angle of View: 140 °
• Save Format: MOV
• Iris: F2.0
• Power: 5V
• Dimensions (without holding mount): 75x43x22mm
• Weight: 83g
• Storage Conditions: 5 °C – 45 °C
• Working Conditions: 0 °C – 35 °C

WARRANTY / CLAIMS

• This product is covered by a 24-month warranty. The warranty conditions are available on the website: https://xblitz.pl/warranty/

• Complaints should be submitted with the complaint form which can be found at http://reklamacje.kgktrade.pl/

• Contact details and the address of the service can be found on the website: www.xblitz.pl
  Specifications and contents of the kit are subject to change without notice, We apologise for any inconvenience. For the full version of the manual, please visit www.xblitz.pl

• Manufacturer: KGK Trade sp. z o.o. sp. k. Ujastek 5b 31-752 Cracow Poland Made in P.R.C.

DISPOSAL

The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside vwith household waste.Inorder to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19/EU) and the Directive on batteries and accumulators (2006/66/EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided forby the law in force in the given area.

References

• System reklamacyjny KGK Trend
• Warranty - Xblitz.pl

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>