Xblitz PARK VIEW Full Rear View Mirror Dashcam with Backup Camera User Manual
- June 3, 2024
- Xblitz
Table of Contents
**Xblitz PARK VIEW Full Rear View Mirror Dashcam with Backup Camera User Manual
**
BEFORE FIRST USE
- It is recommended to use high-quality class 10 micro SD cards (4 to 32 GB).
- It is necessary to format the memory card to FAT32 format before inserting it into the recorder.
- Do not remove or insert the memory card while the device in powered on, as this may damage the memory card.
- The battery allows you to record for no more than 5 minutes without an external power.
- When the memory card is full, the oldest unprotected video will be overwritten.
- It is recommended to use the device’s functions in accordance with their intended purpose. Do not use the motion detection or parking mode while driving as this may cause automatic turning the device on and o, during a stop at the intersection.
- It is recommended to set the G – SENSOR sensitivity level at a minimum, in order to avoid securing unnecessary recordings and the loss of space on the memory card. The memory card must be formatted in FAT32 format first on the PC and then on the recorder.
- Sound: t e device has a capacitive microphone, recording all the sounds from the environment. The sounds may overlap causing distortion.
CAMERA INSTALLATION
- Put the camera onto the rear mirror.
- Mount the camera using rubbers included in the set.
- Run the power wire and the rear camera wire.
- Connect the power wire and the rear camera wire.
- Connect the power adapter to the car cigarette lighter socket.
Place of installation of the additional camera, (included in the kit) depends on your predisposition. The camera meets the IP54 requirements.
Black wire included in the set should be connected via micro USB in the main device and swiped to the place of additional camera installation. Make sure that the main device may recognize the additional camera (if not, check wether the wire is correctly putted into both slots).
Installation of the rear view camera: cables coming out of the rear camera should be connected to the reversing lights power cables (red = plus). Installation derived outside should be well insulated and should not be stretched mechanically.
THE SET CONTAINS
- Car camera Xblitz Park View
- Car charger
- Rear camera with the wires and installation accessories
- Memory card reader
- USB wire
- User’s manual
PRODUCT DESCRIPTION
- Mounting bracket
- Display
- Rear view camera
- Power button
- Menu button
- Mode button
- Left button
- Right button
- Ok button
- Micro SD card slot
- Rear view camera port
- Mini USB port (charging)
- Reset button
- Microphone
- Lens
MENU
We use the MENU Key to enter the main menu. We use the “right” and “left” keys to navigate between menu items. We use the “ok” key to confirm the action. Menu items:
-
Video quality
Defines the quality of video recordings. The higher the resolution the better the quality of recordings, but such files take up more space on the memory card. -
Photo quality
This option allows you to change the resolution of the photos. -
Loop recording
Length of the video recordings. The selected option is symbolized by an icon during the recording, which is located on the left side of the screen (o the menu). -
Motion detection
When you enable this option and leave the camera in standby mode, powered on, the camera will record a short (10 second) video every time motion is detected in front of it. If you manually stop recording, the option will be automatically disabled. -
White Balance
White balance settings. -
Contrast
Contrast settings. -
Exposure
Exposure settings. -
Auto power on / o
Once the camera is powered on(the vehicle engine starts), the device automatically turns on and starts recording. Once the camera is powered o (the vehicle engine shuts down), the camcorder automatically saves the recording and turns o the power. -
Screen saver
Sets the time after which the display should turn o. -
Sound recording
Enabling and disabling audio in recordings. -
Parking mode
When this function is turned on, and the camera is left in the car, powered on, it captures the shock of the car (for example, when our car is hit by another car), turns on and starts recording. This function should be turned o while driving, as it may aect recordings. -
G-sensor
Sets the sensitivity of the sensor or switches it o. When the sensor is activated at the moment of impact, the recorded file is protected against being overwritten. We recommend setting a lower value of sensitivity: “low”, otherwise the camera can capture shock at the car bumps. -
Date & time
Sets the date and time for the camera. -
Language
Sets the language for the camera. -
Date stamp
Enabling and disabling the date and time for the photo. -
Format
You can format the memory card in your device. -
Default settings
Sets the default settings of the device. -
Firmware Info
Software version
A. PLAYBACK MODE
- We use the OK key to turn on and o the recording.
- Short pressing the “power” key turns o / on the display. Long pressing turns o the camera.
- We use the “right” key to turn on and o the microphone.
- Time if the recording (camera recording info)
- Parking mode info
- Memory card info
- Sound info
- Power supply info
- Time
During video recording use the “mode” key to protect the recording from being overwritten.
B. PHOTO MODE
We use the “ok” button to take a picture.
- Camera mode info
- Date to be displayed on the picture
- Memory card info
- Battery indicator
- Time
C. PLAYBACK MODE
- We use the “ok” key to play a video file.
- We use “left” and “right” keys to navigate between files.
- We use the “menu” key to delete a file.
- We use the “power” key to protect the file from being overwritten.
- File name
- Power supply info
- Time
While playing video we can also use the OK key to activate Play / Pause command. Use “left” and “right” keys to adjust the volume.
TECHNICAL SPECIFICATION
- Processor: GP2248
- Sensor: H62
- Camera resolution: Front: 1920×1080, Back: 640×480p
- View angle: 140°
- Photo resolution: 1280 x 960p, 1600 x 1200p
- Video format: AVI / H.264
- Photo format: JPEG
- Storage temperature: 30 ~70°C
- Working temperature: -10 ~50°C
- Humidity: 15-65%RH
- Memory card: microSD up to 32 GB
- Power supply: DC5V
FAQ
The device does not turn on, the display is blinking
It is necessary to charge the device’s battery before the first use.
The device does not turn on / turns o automatically.
The reason for this may be constant powering by the cigarette lighter socket.
The device reboots while driving.
Check the power source.
Loop recording does not work (the device records randomly).
Check the functions “Motion Detection” and “Park Mode”. They both should be turned o while driving
The device displays the message “memory card full”.
Check the “G-sensor” and “Park Mode” sensitivity settings – both should be set at a minimum. The memory card must be formatted in FAT32 format first on the PC and then on the recorder
The device records the noise and distorted, indistinct sound:
The device has a very sensitive microphone, which records all the sounds from the environment. The sounds may overlap. Airflow windscreen eectively distorts the sound too.
WARNING: Use only chargers with charging current up to 2A. (Do not connect directly to the 220 / 230V power outlet.) Failure to follow these instructions could result in damage to the camera or, in extreme cases, to ignition.
WARRANTY / CLAIMS
The product is covered by a 24-month warranty. Warranty conditions
available on the website https://xblitz.pl/warranty/
Complaints should be reported using the form located at:
http://reklamacje.kgktrade.pl/
Contact details and website address can be found on the website:
www.xblitz.pl
Specifications and contents of the kit are subject to change without notice, we apologize for any inconvenience.
Manufacturer:
KGK Trade Sp. z o.o. sp. K
Os. Urocze 12
31-953 Cracow
The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19 / EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.
SAFETY MEASURES:
- Do not disassembly or interfere with the camera. If the device is faulty, contact the service point.
- Only use the original accessories.
- Use only the original charger, included in the set. Using a dierent power supply can aect the battery negatively.
- Do not use the device for purposes that are against the law of the country or region you are in.
- The operating temperature of the device is 0 – 35°C. Storage temperature is 5°C to 45°C. Operating air humidity is 5-90% without condensation.
- Avoid damaging the device with physical force.
- Clean the device, especially the lens. Do not use detergents or other chemicals when cleaning the device.
- Clean the device only when it’s disconnected from the power supply.
- Keep the device away from children.
- Do not expose the device to very high temperatures and fire.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>