Xblitz S9 duo WIFI Video Recorder with Rearview Camera User Manual

June 1, 2024
Xblitz

Xblitz S9 duo WIFI Video Recorder with Rearview Camera

Xblitz-S9-duo-WIFI-Video-Recorder-with-Rearview-Camera-FIG-
\(2\)

VIDEO RECORDER
Carefully read the enclosed operating instructions and safety notes before use to avoid accidental damage to the equipment or unintentional injury.

PURPOSE OF THE PRODUCT
The Xblitz S9 Duo Dash Cam, in combination with the rearview camera and Wi-Fi, allows you to monitor your vehicle’s route from both the front and rear and record any traffic incidents. The dash cam is built from the highest quality components.

BEFORE USE

  1. It is recommended to use original micro SD cards of class 10 or higher.
  2. Before placing the memory card in the recorder, it must be formatted in the computer in the FAT32 or exFAT file system (depending on the card) and then in the recorder.
  3. The memory card must be installed when the device is switched off. Failure to do so may damage the card and the device. The same applies when removing the card from the device.
  4. Set in the menu:
  5. Date and time.
  6. Loop recording (adjust recording time). If you disable loop recording, the files will not be overwritten.
  7. Set the highest resolution available.
  8. Set the G-Sensor to the lowest possible sensitivity so that the camera does not catch bumps in the road and protects unnecessary recordings.
  9. Enable WDR mode.
  10. When the memory card fills up, the oldest unprotected recordings are overwritten.
  11. The camera will start recording automatically every time you switch it on (provided there is no permanent power supply in your car’s cigarette lighter socket).
  12. It is recommended to use the functions of the device according to their intended use, i.e. not to use the PARKING MODE and MOVEMENT DETECTION functions while driving. This may cause the recording to start and stop automatically and unnecessary loss of storage space.
  13. Sound: the device has a condenser microphone that records all ambient sounds. Sounds may overlap causing distortion.

CONTENTS OF THE KIT

  1. Video recorder
  2. Rear-view camera
  3. Charger
  4. Handle
  5. Micro SD memory card reader
  6. Operating instructions

PRODUCT DESCRIPTION

Xblitz-S9-duo-WIFI-Video-Recorder-with-Rearview-Camera-FIG-
\(3\)

  1. AV port (connection point for rear camera)
  2. USB-C port (camera power supply)
  3. Micro SD card slot
  4. The „UP” button
  5. MENU button
  6. Down” button
  7. Confirmation button „OK”
  8. MODE button
  9. Recording lock button
  10. POWER button
  11. Microphone
  12. RESET button
  13. Loudspeaker
  14. Charge indicator light
  15. Recording indicator light

DESCRIPTION OF THE KEYS

  • UP – in menu and playback mode is responsible for navigating through the individual items. In video mode, a short press switches audio recording on and off. During video playback, a short press increases the volume level, a longer press rewinds the video.
  • MENU – in every mode except recording takes you to the individual camera settings.
  • DOWN – in menu and playback mode is responsible for navigating through the individual items. During video playback, a short press reduces the volume level, a longer press scrolls the video forward. In video mode, switches the view between the front and rear camera.
  • OK – in video mode, a short press switches recording on and off. In photo mode, a short press takes a photo. During video playback, a short press acts as PLAY/PAUSE. In Menu and playback mode, a short press validates the individual actions.
  • MODE – a short press (when the dash cam is not recording) moves us between video/photo/playback modes. In the menu, pressing the button takes us from the recording/photo/playback settings to the main screen of the unit.
  • BLOCK – during video recording, pressing the button locks the file and prevents it from being overwritten.
  • POWER – short press to blank the screen, longer press to switch the device on/off.

CAMERA INSTALLATION

Xblitz-S9-duo-WIFI-Video-Recorder-with-Rearview-Camera-FIG-
\(4\)

  1. Choose where to mount the camera. It is best to position the camera so that the display preview shows as much of the area in front of the car as possible and the horizon line is in the centre of the frame. Make sure the camera will not obstruct the driver’s view while driving.
  2. Mount the bracket on the windscreen and then install the video recorder with a formatted micro SD memory card in it.
  3. Route the USB power cable so that it does not obstruct the view while driving.
  4. Route the rear camera cable and plug it into the AV socket on the device. Make sure on the camera display that the main device can see the rear camera, if not check the settings in the menu and that the camera cables have been installed correctly.
  5. Place a second camera at the rear of the vehicle.
  6. Plug the power cord into the device and the power supply plug into the car’s cigarette lighter socket.

INSTALLATION OF A REAR-VIEW CAMERA

The location of the extra camera included in the kit is up to you. The camera complies with the IP65 waterproof standard (protection against access to hazardous parts, dustproof protection, protection against a 12.5 l/min water jet directed at the housing from either side). The red wire coming out of the rear view camera should be connected to the power wires of the reversing lights (red = plus). This connec-tion results in a rear view camera.
The installation leading to the outside should be well insulated and not subject to mechanical stress.

MAIN FEATURES OF THE CAMERA

  1. Camera modes
    The camera has 3 modes of operation. Recording mode: in this mode the camera records video. Photo mode: in this mode the camera takes photos. Playback mode: view footage recorded by the camera.

  2. Loop recording
    The camera divides the recordings according to the selected time. When the memory card fills up, the oldest (unprotected) recording is overwritten.

  3. Resolution
    The camera can record in various resolutions. The higher the resolution the better the quality of the recordings, but the recording files also take up more space on the memory card, it is recommended to use the highest resolution.

  4. G-Sensor
    Gravity sensor. When the sensor is activated on impact, the recording file is protected from being overwritten. It is recommended that the lowest avail-able value is set, as at a higher value the camera may pick up bumps caused by unevenness of the road, which can cause the memory card to fill up.

  5. Audio recording
    Along with video recording, the camera can also record audio.

  6. Motion detection
    The camera has a motion detection mode that automatically starts a short audio/video recording when a moving object (e.g. a person approaching the car) is detected. To avoid unnecessary clogging of the memory card in the device, only activate the motion detection mode when you leave the car parked.

  7. Rear-view camera
    A rear camera is included to record video from the rear of the vehicle. The dash cam can record video from both the front and rear cameras simultane-ously without any loss in quality or resolution. In addition, when connected to the power cables of the reversing lights, the image from the rear camera will automatically appear on the display when you shift into reverse, making it easier to park the vehicle.

  8. Parking mode
    When this function is activated, the camera will automatically start overwrite-protected video for several seconds after detecting an impact due to an external collision (if the battery is charged or a constant power kit is connected).

DESCRIPTION OF THE MENU OPTIONS

VIDEO MODE:

  1. Resolution – allows you to change the resolution of the recorded video files.
  2. Loop recording – allows you to change the length of the recorded videos.
  3. G-sensor – allows you to set the sensitivity of the shock sensor.
  4. Exposure – allows us to set the exposure correction of the recorded image, so we can avoid overexposure or underexposure.
  5. Motion detection – allows you to enable or disable the mode in which the camera starts recording video when motion is detected in front of it.
  6. Audio recording – allows you to enable or disable audio recording by the camera.
  7. Watermark – allows you to enable or disable the display of the model name, date and time on recordings.
  8. Registration number – allows you to enable and set or disable the car regis-tration number displayed on the recordings.
  9. WDR – allows you to enable or disable the WDR (Wide Dynamic Range) option, responsible for adapting the recording to the prevailing lighting conditions.

PHOTO MODE:

  1. Resolution – allows you to set the resolution of the images you take.
  2. Sequence – allows you to enable or disable the order of several images (series) to be taken in succession.
  3. Quality – changes the quality of the images, the higher the higher the files.
  4. Sharpness – sets the sharpness of the details in the images taken.
  5. White balance – allows the camera parameters to be adjusted to the prevailing light.
  6. ISO – allows you to change the sensitivity of the camera sensor to light.
  7. Exposure – allows us to set the exposure correction of the images taken, so we can avoid over- or underexposure.
  8. Shake prevention – enables/disables image stabilisation when taking photos.
  9. Quick overview – allows you to enable a brief display of the images you have taken on the camera screen.
  10. Watermark – allows you to enable or disable the display of the model name, date and time on the images you take.

PLAYBACK MODE:

  1. Delete – allows you to delete the currently selected file or all files of a given type.
  2. Protection – allows you to enable/disable blocking of the currently selected file or all files of a given type.

GENERAL MENU:

  1. Wi-Fi switch – allows you to enable or disable the Wi-Fi module on the camera.
  2. Display mirror – allows you to enable or disable mirroring from the rear view camera.
  3. Parking mode – allows you to enable or disable parking mode.
  4. Date/time – allows the date, time and their format to be set.
  5. Automatic shutdown – allows you to set the time after which the camera will automatically shut down.
  6. Screen saver – allows you to set the time after which the device’s display will go blank.
  7. Audible signal – allows you to switch the sound of the buttons on and off.
  8. Language – language settings
  9. Frequency – allows you to select the refresh rate of the image – 50Hz recommended.
  10. Format – performs a format of the memory card inserted in the device – recommended every 30 days.
  11. Default settings – restores the device to its factory settings.
  12. Version – displays information on the software version of the device.

MOBILE APPLICATION

The Xblitz S9 Duo video recorder, thanks to its built-in Wi-Fi module, also has the ability to control and play back recordings via a mobile app called VIIDURE. The software can be downloaded from the Play Store (Android), App Store (iOS) or by scanning the QR code placed on the box.
Connecting to the app: Make sure your camera is switched on and has Wi-Fi activated. Launch the app, add your device and search for a Wi-Fi network on your phone, the device Wi-Fi network name is: Xblitz S9 Duo and the default password is 12345678. Once the device is successfully connected to the app, a screen will appear on the camera display informing you that you can control the camera via the app (it is not possible to control the camera manually with buttons at this time). You can then manage the settings yourself or view and save recordings to the phone memory. Note: only one device can be connected to the network when using the camera.

PRECAUTIONS

  1. Do not disassemble or tamper with the camera yourself. If a malfunction occurs, please contact the service department.
  2. Use only original accessories.
  3. Use only the original power supply unit included in the kit.
  4. The device may not be used in contravention of the laws of your country or region.
  5. Permissible operating temperatures are 0 – 35°C. Storage: +5 to + 45°C. Humidity: 5-90% non-condensing.
  6. Do not subject the device to damage or physical impact.
  7. Take care of the cleanliness of the product, especially the lens. Do not use detergents or chemicals when cleaning.
  8. Clean only when the unit is unplugged.
  9. Keep the device out of the reach of children.
  10. Do not expose the device to very high temperatures or fire.
  11. If you smell burnt plastic or electronics from the camera, unplug the unit as soon as possible and contact the service department.

FAQ

  1. Device does not switch on, screen flashes
    Before starting up, charge the unit’s battery and check the connection in the cigarette lighter socket.

  2. The device does not switch on/off automatically
    The reason for this behaviour may be the constant power supply in the cigarette lighter socket.

  3. The camera stops recording / does not overwrite recordings
    Check: G-SENSOR – a function by which recordings with recorded overloads (e.g. uneven pavement, braking, driving off a kerb or over a speed bump, etc.) are protected from being overwritten. If you use this function, you must periodically format the memory card on your computer and then on the camera. Ultimately, each file on the data carrier will be protected from being overwritten and the device will not be able to record a further route – it will not record in a loop. We suggest setting the sensor according to your driving style and road conditions. You can also disable the option completely, in which case each oldest file will be overwritten and the card will not need to be formatted periodically. After adjusting the function, remember to format the memory card.

  4. The camera turns on and off
    Check: PARKING MODE/MONITOR and MOVEMENT DETECTION – function designed to operate while the vehicle is parked. Deactivate the function, before setting off, as it may cause the camera to switch on and off and make random fragments of route recordings. If the functions are disabled, check if the fault occurs without the memory card inserted.

  5. The camera records fragments of the route / random ongoing recordings Check: MOVEMENT DETECTION – a function designed to operate while the vehicle is parked.
    You need to deactivate the function, before setting off, as it can cause the camera to switch on and off and make random fragments of route record-ings. If the function is deactivated, check that the fault occurs without a memory card inserted.

  6. The device shows the message “card full” or does not read the card Check the “G-sensor” and “parking mode” functions and set them to mini-mum. The card must be formatted in the computer in the FAT32 or exFAT file system (depending on the card) and then in the recorder.
    Also check: Is the selected card capacity and specification (micro SD, class 10 – U1, V10 additionally recommended) suitable for your device (we recom-mend using cards from reputable manufacturers, we recommend: Kingston, Samsung, Sandisk). If you encounter an error at any stage, replace the card with a new one from an official distribution.

  7. The device records noise, distorted, unclear sound
    The device has a highly sensitive microphone that records any ambient noises. The recorded sounds may overlap. Windscreen air vents can also distort the sound.

  8. The device does not respond
    Press the Reset button briefly or return the device to factory settings.

  9. Transverse stripes are present in the footage
    Incorrect setting of the frame rate value. Set the frequency value to “50Hz” or “60Hz” depending on local settings.

  10. Handle detaches from windshield/does not stick
    Degrease the surfaces well before mounting the holder on the glass. Remember to avoid high temperatures, which can cause deformation of the holder, and damage to the recorder itself.

NOTES:

  • G-SENSOR – a function thanks to which recordings with recorded overloads (e.g. uneven road surface, braking, driving off a kerb or over a speed bump, etc.) are protected from being overwritten. If you use this function, you must periodically format the memory card on your computer and then on the camera. Ultimately, each file on the data carrier will be protected from being overwritten and the device will not be able to record a further route – it will not record in a loop. We suggest setting the sensor according to your driving style and road conditions. The option can also be completely disabled, in which case each oldest file will be overwritten and the card will not need to be formatted periodically.

  • PARKING MODE/MONITOR – a function designed to operate while the vehicle is parked, uses battery power if the video recorder is fully charged – (if it has a built-in battery) . In this case, the camera starts recording a few seconds of video after detecting a shock – until the battery is discharged. When using this function, bear in mind the battery of the device, which needs to be recharged after the function activates (starts). You should deactivate the function, before setting off on a journey, as it may cause the camera to switch on and off and make random fragments of recordings from the route.
    The constant power supply in the vehicle may cause this function to behave differently, e.g. leaving the camera on, which may drain the car battery.

  • MOVEMENT DETECTION – a function designed to operate while the vehicle is parked – requires constant power and the camera must remain switched on. The dash cam will start recording automatically when motion is detected, and will stop recording a few seconds after there is no movement in front of the camera lens. Please note that this function can drain the car battery.
    You need to deactivate the function, before setting off, as it can cause the camera to switch on and off and make random fragments of route footage.
    CAUTION : Use only the original charger with a charging current of 5V/1A. (Do not connect directly to a 220/230V socket). Failure to follow the instructions may damage the camera or lead to dangerous situations.
    Due to continuous product improvement, the manufacturer reserves the right to change the device and its kit without prior notice, some functions described in this manual may change
    slightly different in reality.

SPECIFICATION

Processor: GPCV2178A | Recording resolution: Front 2304x1296p/30fps, Rear 1280x720p/30fps | Sensor: SC3336 | Lens: Front 170°/FNO=1.8, Rear 120° |Display: 3 inches | Memory: Micro SD cards up to 128 GB class 10 | WDR mode: Yes | Motion detection: Yes | Parking mode: Yes | Loop recording: Yes | G-sensor: Yes | Recording format: MOV | Codec: H.264 | Power supply: 5V/1A | USB: USB-C | Microphone/speaker: Built-in | Built-in battery: Yes | Operating frequency range: 2400-2483.5MHz | Max frequency power in the operating range: 5.56dBm | Dimensions: 88x36x54mm | Weight (with handle): 130g

WARRANTY/COMPLAINT CARD

The product comes with a 24-month warranty. Warranty terms and conditions can be found at: https://xblitz.pl/gwarancja/
Complaints must be made using the complaint form found at: http://reklamacje.kgktrend.pl/
Details, contact and service address can be found at: www.xblitz.pl. Specifications and contents are subject to change without notice. We apologise for any inconvenience.
KGK Trend declares that the Xblitz S9 Duo complies with the essential requirements of Directive 2014/53/EU. The text of the declaration can be found at the link: https://xblitz.pl/download/DOC/deklaracja-UE-Xblitz-S9Duo.pdf

DISPOSAL

The crossed-out trash can symbol indicates that unusable electrical or connes example batteries is are coot te disposed of alongside household waste. To dispose of the devices or their components (for example batteries) deliver the device to the collection point, where it will be accepted free of Disposal is subject to the recast version of the Wett Directive (2012/19/ EU) and the Directive on batteries and accumulators (2006/66 / EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

Manufacturer:
KGK TREND Sp. z o. o.
Ujastek 5b, 31-752 Cracow, Poland. Made in PRC

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals