LUMEX SKYBAY4 LED HIGHBAY LIGHT Instruction Manual

: June 3, 2024
: LUMEX

Table of Contents

SKYBAY4 LED HIGHBAY LIGHT
INSTALLATION INSTRUCTIONS
SEVEN YEAR WARRANTY AGAINST DEFECTS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SKYBAY4 LED HIGHBAY LIGHT
Instruction Manual LUMEX SKYBAY4 LED HIGHBAY LIGHT

SKYBAY4 LED HIGHBAY LIGHT

SKYBAY4
LED HIGHBAYLIGHT
INSTRUCTION MANUAL

INSTALLATION INSTRUCTIONS

Ensure the power has been turned off before attempting installation
This product must be installed by a licensed electrician strictly accordance with current version of AS/NZ 3000 Electrician installations (Australia/New Zealand Wiring Rules), or with regulation compliant to your country.

Identify a suitable mounting location and run appropriate cabling.
Terminate cabling at each light point with a standard 1 0A Socket.
Using all appropriate safety measures, hang fixture on mounting hook or bracket and ensure it is secure.
Follow the installation steps as given in the figures below.
Plug lead into socket and turn on the power when installation is complete.

A. Loop hanging installation
Physical Dimensions(Unit: mm/inch) LUMEX SKYBAY4 LED HIGHBAY LIGHT fig
2

B. Adjustable surface mount installation LUMEX SKYBAY4 LED HIGHBAY LIGHT
fig 1 C.Sensor installation LUMEX SKYBAY4 LED HIGHBAY
LIGHT fig 3 D.Prismatic Diffuser LUMEX SKYBAY4 LED
HIGHBAY LIGHT fig 4

E.Aluminium Reflector LUMEX SKYBAY4 LED HIGHBAY LIGHT fig
5

LUMEX Part Number| Rated Power(W)| Input Voltage| Power Factor| CRI(Ra)| Protection Rating| Beam Angle| Production Dimensions (Lx)
---|---|---|---|---|---|---|---
LL2LHB4D80| 80| 220-240Vac| >0.9| >80| IP65| 120°| 0315x186mm
LL2LHB4D100| 100| 220-240Vac| >0.9| >80| IP65| 120°| 0315x186mm
LL2LHB4D120| 120| 220-240Vac| >0.9| >80| IP65| 120 °| 0315x186mm
LL2LHB4D150| 150| 220-240Vac| >0.9| >80| IP65| 120°| 0315x186mm
LL2LHB4D180| 180| 220-240Vac| >0.9| >80| IP65| 120°| 0315x186mm

Maximum Operating Temperature Ta:60″C for standard version.
ATTENTION:

PRIOR TO INSTALLATION, MAINTENANCE OR INSPECTION, TURN OFF ELECTRICAL POWER AT FUSE OR CIRCUIT BREAKER BOX.
If an external flexible cabie is installed,if it is damaged,it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Make sure that the mounting surface or structural member used for installation can support the weight of the product.
The light source of his luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
Please keep this guide for future reference.

SEVEN YEAR WARRANTY AGAINST DEFECTS

WARRANTY
Lumex Lighting (Australia Only)
With your new Lumex installation comes the quality assurance provided by the seven (7) year or 35,000 operational hour Warranty (the “Warranty”)
The warranty is offered to you by Verbatim Australia (“Verbatim’1 Ply Ltd of Unit 6, 450 Princes Highway Noble Park, VIC, 3174.
Phone contact: +61 3 9790 8999
Subject to the terms of this document, Verbatim warrants to the owner of the Installation that Verbatim will repair or replace, without charge Lighting product (the “Product”) if the Product fails due to any manufacturing defect during the first seven (7) years or 35,000 hours of operation following initial installation.
This Warranty applies from the date of invoice for a period of seven (7) years or 35,000 hours of operation thereafter subject to the conditions set in this Warranty.
A. Definitions
In this warranty:

Australian Consumer Law means the Australian consumer law set out in Schedule 2 to the Ccompetition and Consumer Act 2010.
Goods mean the product or equipment that was purchased in Australia.
Manufacturer, We or us means Verbatim Australia Ply Ltd ABN 39 005 706 37 4.
Supplier means the authorized distributor or the licensed electrical contractor that sold you the Goods.
You means you, the original end-user purchaser of the Goods.

B. Warranty Period and Details
This product is covered by a seven (7) year or 35,000 hours of operation installed warranty against manufacturing faults and defects, provided that:

The product is properly installed, and installation is consistent with the manufacturer’s instructions, and is installed by suitably trained and qualified installer.
The product is not subjected to any unauthorized modifications.
The product is only used for the purpose of illumination, in line with its designated purpose or the designated purpose of a luminaire of its general type.
The product use is in normal conditions and not exceeding a total of 35,000 hours over the warranty period.
Any faults or defects attributable to the misuse, abuse, accident or non-observance of the manufacturer’s instructions on the part of the user are specifically excluded.
Where a battery product is installed, the warranty period covers 12 months.
Where a SmartSense™ product is installed, the warranty period covers five (5) years for the sensor technology only.
Where a third party component is installed within, or as part of, a Lumex fitting, the warranty period is as dictated by the Original Equipment Manufacturer of the third party component.

This Warranty DOES NOT COVER:

Damage caused by acts of god, or other incidents/occurrences beyond the control of Verbatim, including without limitation, fire, theft, storms, floods.
Damage caused by water or other forms of moisture being absorbed by the LED light fitting.
Damage caused by chemical impact or other abuse including environmental factors, improper cleaning solutions, damage from leaving substances such as bleach on the product.
Damage or problems caused by the use of an accessory, component or equipment not supplied by Verbatim.

C. Extent of the Warranty
Verbatim do not cover freight charges (including insurance) or travelling cost for repairs performed outside the area normally serviced by Verbatim or an authorised repair agent.

Goods that prove defective within the Warranty Period by reason of improper workmanship or faulty material, wemay, at our own discretion, either repair or replace the Goods without charge.
This warranty does not cover any cost related to removal, or reinstallation of the replaced or repaired item. Any parts of the Goods replaced during repairs or any product replaced remain the property of Verbatim.
In the event of the Goods being replaced during the Warranty Period, the warranty on the replacement Goods will expire on the same date as the Warranty Period of the original Goods they are replacing.

D. Applicable Date/Commencement of Warranty
This warranty commences from the date of purchase from the point of purchase from Verbatim Australia Ply Ltd.The details of the point of purchase, as well as all contact information for warranty claims and queries, are detailed below:
Contact: Verbatim Customer Service Verbatim Australia Ply Ltd
Address: Unit 6, 450 Princes Highway Noble Park, VIC, 317 4
Phone: 1300 897 287
Fax: +61 3 9790 89 99
Email: customerservice@verbatim.com.au
IMPORTANT
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entltled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.