LUMEX Linear HighBay LL2LBA2 Series Instruction Manual
- June 3, 2024
- LUMEX
Table of Contents
Linear HighBay LL2LBA2 Series
Instruction Manual
Linear HighBay LL2LBA Series
This product should be installed by a licenced electrician in compliance with
the requirements set out in AS/NZS3000 (current edition) or other regulations
that may be relevant to the situation.
Use safe practices for working at heights.
Installation Instructions
- Ensure the relevant circuit is isolated before working on the installation.
- Assumed a suitable supply is available.
- Secure the fixture in the correct position and height, in the same orientation as the bays or aisles.
- Ensure it Is mounted in such a way that the orientation is not effected by drafts or other environmental elements.
- Use a suitable method and fixings for the situation.
- The fixture comes with 1.5m of UV resistant flexible cable and a three pin 10A plug for installers convenience.
- Plug fixture into supply socket.
- Perform electrical test.
- Make final adjustment to meet lighting design requirements and lock off adjustments
Linear Highbay – SmartSense
Cat No. | Watts | CCT | Max Lumens |
---|---|---|---|
LL2LBA3DM90CS | 90 | 5000K | 13,500 |
LL2LBA3DM120CS | 120 | 5000K | 18,000 |
LL2LBA3DM150CS | 150 | 5000K | 22,500 |
LL2LBA3DM180CS | 180 | 5000K | 27,000 |
LL2LBA3DM210CS | 210 | 5000K | 31,500 |
LL2LBA3DM240CS | 240 | 5000K | 36,000 |
Beam angle – Symmetric 30 ° x 70°
(30X100 70X70 40X80 optional)
SmartSensor version – for details please refer to sensor manual
Electrical
Input Voltage……………… 220-240W ∼50 Hz
Typical total power………… 90 – 240W
Power factor……………………….>0.95
Total harmonic distortion………………….>15%
Output
Luminous flux……………………refer to table
Efficacy……………………………………Up to150Lm/W
CRI………………………………………..75
Thermal
Operating range Ta …………………………-40°C to +50°C
Humidity (non condensing) …………………….15-95%
Protection
Ingress……………IP65
Impact……………….. IK08
Warranty
Lumex LED fixtures are warranted against failure due to a manufacturing defect for a period of seven(7) years or 35,000 operational hours from the date of purchase, whichever is the lesser. In standard warranty applications, Lumex undertake to repair or replace the product. For installation registered under the Commercial Installed warranty program, additional benefits are applicable. Refer to the detailed warranty statements posted on the website for clarification.
CUSTOMER SERVICE
+61 (03) 9790 8999
verbatimlighting.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>