LUMEX SKYBAY 4 LED High Bay Light Instruction Manual

LUMEX SKYBAY 4 LED High Bay Light Instruction Manual

INSTALLATION INSTRUCTIONS

Ensure the power has been turned off before attempting installation This product must be installed by a licensed electrician strictly accordance with current version of AS/NZ 3000 Electrician installations (Australia/New Zealand Wiring Rules), or with regulation compliant to your country.

1. Identify a suitable mounting location and run appropriate cabling.
2. Terminate cabling at each light point with a standard 10A Socket.
3. Using all appropriate safety measures, hang fixture on mounting hook or bracket and ensure it is secure.
4. Follow the installation steps as given in the figures below.
5. Plug lead into socket and turn on the power when installation is complete.

LUMEX Part

Number

| Rated Power(W)| Inut Voltage

p

| Power
Factor| CRI(Ra)| Protection Rating| Beam
Angle| Production Dimensions (LxWxH)
---|---|---|---|---|---|---|---
LL2LHB4D80| 80| 220-240Vac| > 0.9| > 80| IP65| 120°| 0315x186mm
LL2LHB4D100| 100| 220-240Vac| > 0.9| > 80| IP65| 120°| 0315x186mm
LL2LHB4D120| 120| 220-240Vac| > 0.9| > 80| IP65| 120°| 0315x186mm
LL2LHB4D150| 150| 220-240Vac| > 0.9| > 80| IP65| 120°| 0315x186mm
LL2LHB4D180| 180| 220-240Vac| > 0.9| > 80| IP65| 120°| 0315x186mm

Maximum Operating Temperature Ta:60°C for standard version.

ATTENTION:

• PRIOR TO INSTALLATION, MAINTENANCE OR INSPECTION, TURN OFF ELECTRICAL POWER AT FUSE OR CIRCUIT BREAKER BOX.
• If an external flexible cable is installed,if it is damaged,it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• Make sure that the mounting surface or structural member used for installation can support the weight of the product.
• The light source of his luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
• Please keep this guide for future reference.

WARRANTY

Lumex Lighting (Australia Only) With your new Lumex installation comes the quality assurance provided by the seven (7) year or 35,000 operational hour Warranty (the “Warranty”)

The warranty is offered to you by Verbatim Australia (“Verbatim”) Pty Ltd of Unit 6, 450 Princes Highway Noble Park, VIC, 3174.

Phone contact: +61 3 9790 8999

Subject to the terms of this document, Verbatim warrants to the owner of the Installation that Verbatim will repair or replace, without charge Lighting product (the “Product”) if the Product fails due to any manufacturing defect during the first seven (7) years or 35,000 hours of operation following initial installation.

This Warranty applies from the date of invoice for a period of seven (7) years or 35,000 hours of operation thereafter subject to the conditions set in this Warranty.

A. Definitions In this warranty:

• Australian Consumer Law means the Australian consumer law set out in Schedule 2 to the Ccompetition and Consumer Act 2010.
• Goods mean the product or equipment that was purchased in Australia.
• Manufacturer, We or us means Verbatim Australia Pty Ltd ABN 39 005 706 374.
• Supplier means the authorized distributor or the licensed electrical contractor that sold you the Goods.
• You means you, the original end-user purchaser of the Goods.

B. Warranty Period and Details
This product is covered by a seven (7) year or 35,000 hours of operation installed warranty against manufacturing faults and defects, provided that:

• The product is properly installed, and installation is consistent with the manufacturer’s instructions, and is installed by suitably trained and qualified installer.
• The product is not subjected to any unauthorized modifications.
• The product is only used for the purpose of illumination, in line with its designated purpose or the designated purpose of a luminaire of its general type.
• The product use is in normal conditions and not exceeding a total of 35,000 hours over the warranty period.
• Any faults or defects attributable to the misuse, abuse, accident or non-observance of the manufacturer’s instructions on the part of the user are specifically excluded.
• Where a battery product is installed, the warranty period covers 12 months.
• Where a SmartSenseTM product is installed, the warranty period covers five (5) years for the sensor technology only.
• Where a third party component is installed within, or as part of, a Lumex fitting, the warranty period is as dictated by the Original Equipment Manufacturer of the third party component.

This Warranty DOES NOT COVER:

• Damage caused by acts of god, or other incidents / occurrences beyond the control of Verbatim, including without limitation, fire, theft, storms, floods.
• Damage caused by water or other forms of moisture being absorbed by the LED light fitting.
• Damage caused by chemical impact or other abuse including environmental factors, improper cleaning solutions, damage from leaving substances such as bleach on the product.
• Damage or problems caused by the use of an accessory, component or equipment not supplied by Verbatim.

C. Extent of the Warranty
Verbatim do not cover freight charges (including insurance) or travelling cost for repairs performed outside the area normally serviced by Verbatim or an authorised repair agent.

• Goods that prove defective within the Warranty Period by reason of improper workmanship or faulty material, wemay, at our own discretion, either repair or replace the Goods without charge.
• This warranty does not cover any cost related to removal, or reinstallation of the replaced or repaired item. Any parts of the Goods replaced during repairs or any product replaced remain the property of Verbatim.
• In the event of the Goods being replaced during the Warranty Period, the warranty on the replacement Goods will expire on the same date as the Warranty Period of the original Goods they are replacing.

D. Applicable Date/Commencement of Warranty
This warranty commences from the date of purchase from the point of purchase from Verbatim Australia Pty Ltd.The details of the point of purchase, as well as all contact information for warranty claims and queries, are detailed below:
Contact Verbatim Customer Service Verbatim Australia Pty Ltd
Address: Unit 6, 450 Princes Highway Noble Park, VIC, 3174
Phone: 1300 897 287
Fax: +61 3 9790 89 99
Email: customerservice@verbatim.com.au

IMPORTANT
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

CUSTOMER SERVICE
+61 (03) 9790 8999
verbatimlighting.com.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>