cudy WU650 WLAN Adapter Installation Guide

WU650 WLAN Adapter
Installation Guide

WU650 WLAN Adapter

Quick Installation Guide
**** Email: support@cudytech.com
Driver & Manual: www.cudytech.com/download

Driver Installation

1. Please insert the usb adapter directly into the computer’s USB port.
2. Put the CD into the computer drive.
3. Open the driver folder and double click the installation file “Setup.exe”. Click “Next”to finish the installation.
4. After finishing the installation, in the lower right corner of the taskbar, [REALTEK Client Management Software ] appears, indicating the installation succeed.

WiFi Adapter Mode

1. Double-click ” ” REALTEK USB Wireless LAN Utility.
2. Click on the upper menu “Available Network”, select the wireless network SSID you want to connect to.
3. Enter the network key, confirm the network key, click “OK” as shown below:
4. After the connection is successful, the signal strength and link quality are displayed, as shown below:

Soft AP Mode

1. Click on the management software menu [Mode] to select [Access Point], as shown below:

2. After switching to access point mode, the  SSID displays the name of the computer, asshown below:

3. Click on the image above “Configuration” to open the Wireless Network Properties Settings dialog to set the network name (SSID), channel, encryption algorithm and
   password. Click “OK”.

4. Click “ICS” to select the network connected to your computer, click “Application” , as shown below:

EU Declaration of Conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.cudytech.com/ce.

References

• Cudy CE
• Download Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>